BRUTALLY HONEST // SANYIPACE 9" SEWER CAMERA 

You need to adjust the sensitivity down to obtain a middle reading then move the detector, and readjust again when it reaches a max reading. Very handy to use to inspect for any damages before you start any work to cover your r,ss. The detector is also handy as not all ducts run in a straight line, think if you were inserting the camera from the rear of toilet within the home then the meterage is only an estimate.

'It's a bag of toss' is my favourite comment of the year so far on RU-vid, you even made my Mrs laugh who was vaguely listening. Cheers! :D

Seems a good deal. I use a similar one for pest control and ive got a 3k unit too. The cheap one is the first i get out to do a quick search of the system and its usually the only one i use. If theres a long distance or several bends to negotiate then the big unit is used. The locator does look cheap tbh but it needs to be tuned as you are using it to locate the sonde in the camera head.

I'v gone with two of your recomendations, the foam gun and the rotory lazer and you ain't been wrong yet, the lazer level replaced my spectra one that went missing that cost over £700, and as you said the cheaper one dose exactly the same job, so keep up the honest product tests.

You're meant to adjust the sensitivity on the reader to dial into the exact location. You made a heap of using that. Also the purpose of the reading meter is if you didn't know the location of the pipes you roded.

it should have an attenuator, to adjust the sensitivity as you get closer to the camera, so the meter isn't at full scale all the time. it can also be used to find the camera if it gets stuck

Thanks for showing us. I've always wanted to have one, but that locator thingy is a bit disturbingly cheap, Amazon listed the locator alone for 430/460 EUR !! Just imagine buying this and then receiving such a thing. (complety set is around 1100 inkl. VAT) Cheers

£800 = 16 site visits to inspect an issue and report for a customer.. Drains.. Cavity wall .. under floors etc.. .. @ £50 a job.. Paid for itself.... Re plastic grub screws.. just replace if you feel it necessary... Conveyance surveyors will love it.. to add to their toolkit when surveying properties... etc

Adam, interesting product review, my Son works for Dyno-Rod and I have seen the professional drain cameras they use - at the end of the day you get what you pay for - however this product seems to fall into no mans land between the diy market and the professional market and is not really an attractive proposition for either - as a few posters have already said - if you need to survey some pipework - it's easier to get someone in to do it - and you don't get covered in sh**t either!! look forward to Sunday's video, Regards Nick

i live next door to a gynocologist and hes got one of those locator units, i borrowed it once to get ny watch back.

Yea, an honest review. No fawning gratitude. The suppliers must recognise that their kit is totally out there to be ripped if it is not good. The camera locator is useful if you are not sure of the pipe routing. If all you have is the entry hole and you've gone,say 12 metres, on an uncharted run, you have no idea where the camera is - all you know is that you have payed out 12 metres of cable. If a dig is necessary in order to effect a repair, the locator should find the camera with some considerable degree of accuracy and prevent any worksite resembling a rabbit warren. It might well need calibrating/setting in order to function correctly. Other brands of locator certainly do work.

Quite interesting, ive only ever used one a couple of times and hired one in on each occasion but was pricey and a fair drive to collect. The camera i hired was a bigger afair and quite advanced, farr more so than i required infact. Good review in fairness.

How bizarre is life! You and gate city drainage putting out videos on the exact same product on the same day!!!! 😮

Forget the review, WHY did you use 2 right angle bends and not go straight?

Brilliantly demonstrated pal 😀😀

Cost versus usage and how much time/money you’d save by having one. I think the locator needs a little more time to test as the sensitivity seems to be set too high. For fault finding its okay. Too much money for someone like me looking back at 38 years in my previous home the only issue I’ve had was locating the soak away. Nice vid and thanks for posting. Regards Mike 👍🏻

The plastic grub screws are probably so if need be you can give it a hard yank and release the camera if ever it gets jammed in somewhere

As ive said before im a drainage and water engineering and personally its perfect if you get a job come up every now and again when its needed but its not for professional use👍

The idea of plastic grub screws is to protect the camera from sausage fingered users. They are supposed to break if over tightened.

Haha loved the singing m8 nearly swallowed me cigarette. .

The locator is for when you don't have straight runs of pipe and can't see where the pipework is. As for price you can get a much better set up even if you only using randomly or for a few jobs a year for the same or a little more money. the memory card is far to small for even DIY usage, you would want a 512 card.

An expensive bit of kit just to check out your piles methinks but great for finding that missing bit of vacuum cleaner or the odd marble.......

Refreshing to get an honest and unbiased review from RU-vidrs receiving free stuff 😂. Fair play... as for the locating device, a ferret finders a lot more accurate. A bell around the camera might work 😂

Hard to tell the video quality without seeing raw footage rather than a video of a screen. However, on the price side, you can buy endoscopes for you phone for small DIY jobs for ££'s...

Fast forward to 24:05 if you want to miss the advert. 😂

I think if it was in the pipe ou would have gotten a better,( more accurate), reading. It will tell you where the tree roots and/ blockage. I agree. With you about the price. Tooooo much. I could see other uses, checking drop cielings to see how much if any clearence and such.

I was on the fence at £120. £800 is a pretty expensive thing that sits in the garage forever and doesn't move.

Didn't read the instructions of the inspection cam - didn't use the tool properly Got told by the company to read the instructions Didn't read the instructions of the detector - didn't use the tool properly Thought you'd learn after the first time lol

I’ve got a question . Can u turn a rodding point in to a manhole ……???????

Hi Adam. Just looked up Amazon and there are a few Sanyipace units with 20m starting at under £300. Bargain...........

The plpe locater sell it put the money in the kids xmass fund

The detector reminded me of the fake bomb detector scam with the infamous ADE 651

At 800 notes, it has no market

On a scale of 0 yo 10, if Milwaukee is a 10 Hilti must be around 30😉

DIY I wouldn't spend that and like you I'd be more inclined to get someone in.

£800 ?#* I’ll take two 😂

Ali express tat to be honest. i would sooner crawl in the pipes than use something that bad .

If you said £199 then i can see the point, apart from that I think i'll pass 👍

They've definitely overvalued the product, so for that reason I won't be investing. "I'm Out".

get a pro to do it.

You should really read the manual. before you make a review

For that price no way. Looks cheap and made in china.