Build 5-inch freestyle fpv drone | SpeedyBee Master 5 HD frame  

Thank you very much for your support and kind words. This kind of comments and appreciation keeps me doing this, because i see that i can help others and this motivates me a lot ☺️. Stay tuned, i have more more builds coming soon 💪

Thank you my friend 😊

Hello my friend. What you mean exactly? Step by step and it will be, i love building drones and diy projects in general and eventually it will be reflected in the number of the subscribers if i keep doing it, and i will keep doing it because it is a passion first of all 😊

@@bilumedia I meant that this is tremendous work! Very nice!

@@dirtypeach thanks man, much appreciated, it is hard to gain subscribers, but with perseverance and passion it will happen eventually 😊

@@bilumedia You should add the "75 mm 6 pin ESC to FC" cable you used to the description.

@@dirtypeach i don’t understand what you are saying! You mean the longer one? I used the shorter one because i don’t like to see wires all over the place

Thanks for the kind words, I appreciate it very much 🤗 it will have much more views, steps by step 💪

Hi my friend, i talk about them because you need them to do the job, now some of them are sponsored tools and are expensive, but if you do this a lot they worth the cost, if not then there are some cheaper alternatives 😊!

You are very welcome 😊! Thanks for your kind words !

Thanks man 😊

Thank you very much, I am very happy that i helped in some way, if you need help just ask 😊

Thank you my friend for your kind words! If you need any help let me know 😉

Thanks man 🤗, much appreciated . I have 5 more builds coming this summer and some of them are custom made with designed 3d parts to fit my vision ☺️

Hello. I know! And normally you won’t have any problems at all, but my friend had a problem with the o3 turning into complete black, even if the bec was powerful enough, not with the this FC! I wanted to be extra sure, so i baby proofed this one 😅, but i am not doing it anymore unless it is absolutely mandatory, with some older units … but you are absolutely right, thanks for the valuable info 🤟

Thanks David for your support and kind words ! this is what keeps me doing these videos 😊. If you need help with your build please feel free to reach out to me on instagram : bilu.media! Good luck with your build :)

It is my pleasure, i am really happy that i could help you. What do you need? What kind of flight characteristics do you want? Exactly in this moment i am heading to the woods to film another build tutorial in the nature 😅. I am transforming actually my foxeer foxwhoop 25 drone intor an O3 drone, this was my first drone and i love it, of course it is easier to build a drone using a frame that is ready for the O3 as this one is not, but i love challenges and creativity and diy projects 😁! So tell me what you need and lets do it ! I am waiting for aos 7 ul frame that is stuck a little bit on the customs, but this is my next project, i have all the parts ready for it … Lets connect in instagram, maybe you can film your drone and flying, i am curious how it turned out 💪 Congratulations on your first build 👏😊

@lenixxq hello my friend, I didn't use GPS after all on this drone, so I can't tell you for sure, but I guess something around 140km/h and about 5 minutes of flight time in general, I would pick the new SpeedyBee Mario 5 frame over this and for the parts Speedybee F405, you can contact me on Instagram and I can give you the links : bilu.media 😊

Hi, i would love to do that, but i dont have the fatshark system !

Hi, thank you very much! yeah the original cable is too short for this frame, here is the cable that I used : bit.ly/3FG6jmy, the V2 frame I understood that is a little shorter and doens't need this cable, but I am not entirely sure!

Hei Man, sure 😃 I struggled the same, i know your pain, but don’t worry, we will make it work, let’s talk on instagram, it is easier there :bilu.media

i got v2 as well. did you have the same issue with camera cable?

@@andreikaliachka279 I am not using the DJI O3 unit.. I am building it with a Foxeer Trex Micro camera, and a Foxeer Extreme 2.5w VTX. DJI system is too expensive for me right now.

@@andreikaliachka279 the o3 is short by default, in the video i changed it to a longer one ! So you need to change it unfortunately, becarefull how you take the cable out, i damaged the connection a little bit and i had to open the camera again, in the camera you have at the end of the connection a little mechanism that clicks, this one you have to pull out carefully 💪

If you have a printer you can easily modify it, i made my own parts for my custom made 3 inc whoop and for my foxeer foxwhoop 2,5

@@bilumedia yeah I have a 3d printer. I will have to create a custom rear end for it.. because I purchased the RP3 receiver that comes with 2 antennas and the default yellow TPU piece it comes with is for only one antenna.. the receiver TPU part is also interfering with the mmcx antenna connector of the VTX and I did not notice and selected the 181 GPS when I checked out the order and I had purchased the 880 GPS which is way bigger. So I'll have to redesign that rear end.

Sure you can do that! At some point if you see in the video I removed 4 wires from the cable that connects the dji air unit to the flight controller. The red and black are for powering the unit and the other 2 are actually for the sbus, so they are for using the dji rc2, and of course you will not need to solder the external elrs reciever as I did 😉

Thank you very much!

@@Peterlustig234442 my pleasure 😊

Hello, you are very welcome! Happy to help 😊 2306 is more for “cinematic” flight and 2207 is more for free style flight! But you wont feel the difference at all! You can use freely 2207 but be sure to be 6s, 1750 is 6s and 1950 is 6s too but it is a little bit less powerful bit not by much! So you are safe with 2207 👍

@@bilumedia Got it, thanks so much for very detail information.

@@jonathanoeijoeng you are very welcome, anytime 😊

Hi, maybe the v2 frame has different mounting? Or maybe it has a defect! You can send me a picture of what you mean on instagram so i can see what is the solution for this. Bilu.media

Hi my friend, my pleasure :) Did you make the necessary settings for the GPS in BF? I didn't show all the steps here, you have to select the GPS from the configuration tab in BF and in the ports tab you have to select GPS for the UART that you are using for that GPS! and after that you have to go to the Fail Safe tab and define how you want your drone to behave when it enter a fail safe situation ! I ended up not using the GPS because I don't fly so far with it, I am building a 7 inch drone and it has GPS! and there is a trick to get satellie lock faster, you have to wrap the gps wire in cupper foil and attach a black wire to that foil and connected to the ground wire together from the GPS, but make sure to wrap that coil afte intor a cloth tape or an electrical tape because it is conductive!tell me if you figure it out please

@@bilumedia Thank You for the reply. I have narrowed it down to ELRS interference. I move the GPS away from the ELRS receiver and antenna that are both sitting in the back and inside my house I get 18 sat locked! I tested it out with the gps zip tied to the front of the quad and I had 23 sat locked. So it’s definitely something to do with the ELRS antenna or RX.

@@emafpv glad that it worked after all 👍. happy flying 🛩

Thank you man 🙏😊

Hello. No, Dji O3 system is only compatible with DJI goggles such as : Goggles2, Goggles V2 & Integra

really happy that my vide helped you get back into building FPV 🥰! the heat sink is from the frame itself, there are a lot of heatsink for the o3 air unit in the market, some of them are generic and some specific a particular frame... for example the SpeedyBee Mario 5 that I will build soon on the channel has a Pro version with a very nice heatsink and it protects also the Air unit, you can check it here : bit.ly/42Bu2PD

Hi, my pleasure 😊 ! Do you use flux? It helps a lot and the solder sticks very good and it never peels! Maybe your solder is not good too! I use 63/37 solder! So it should not peel at all, be careful because if it peels so easy you will loose your feed in your goggles and the crash is inevitable!

Thank you very much for tour kind words, I really appreciate what you said and I am very happy that i could help you 😊! I don’t understand what you did exactly with the capacitor! You put it in the wrong direction? I mean the minus on the plus? You can make a picture and send me on instagram so i can see and try to help you ! Bilu.media

You mean the lipo batteries? I have a lot of them: Cnhl 1400 Cnhl 1050 Iflight 1400 Gnb 1500 Gnb 1300 Gnb 1100 Gnb 4000 li-ion All of them are 6s for this drone 😊

and im new to this build (and diy itself), I believe there are no capacitors in the frame box. I should buy it separately ? or it will come with batteries?@@bilumedia

@@andreikaliachka279 the capacitor comes usually with the stack(fc +esc), did you buy the stack or not yet? The speedybee stack comes with bigger capacitor, but be careful, don’t cut the legs of the capacitor short because you will have problems, actually the new frame doesn’t have a battery plug, right? If not then it is not a problem because the wires will not take all the place and you will have space to wire the capacitor, but put them first and see where they sit and after solder them, and be careful the capacitor to not touch the frame, it can make a short!

@@bilumedia wtf. I found a big bench of accessories in my f7 kit. It is much more fun then Lego

@@andreikaliachka279 😂 yeah it is a lot of fun, i love building drones, i want to transform my foxeer foxwhoop into an o3 drone and it is not made for this, it is challenging and i love this because i have to cut things to design tpu parts and it is a lot of fun, and a 7 inch drone is coming too, i am waiting for the frame, and i rebuilt my flywoo 2.0 drone woth a happy model mobula 8 😃, the video will come soon 💪

Sure, lets talk on instagram : bilu.media

Hi, it is the V1 frame, but it is applicable to the V2 as well. I had a lot of people contacting me and the followed these steps, but for the V2 frame. Small differences is there of course 😊

Thanks my friend, actually it has :), i just measured the holes where is my O3 mounted and there are 30x30 holes too, you can see it here too :ru-vid.comlQhKrGesv-U , if you want me to measure or check anything for you, just say 👍

@@bilumedia thank you for checking! It helped me alot. Atleast I know what frame and stack I will be using for my first drone build.

@@Daniel_SWE I am really happy that I could help you in some way 😊. This is why I did this channel, to connect with people and help them with what I can, because we are people and we should help each other not the other way around 💪

Thank you, it is not hard at all! Maybe after new year i will do a short video about this 🤟

You are very welcome :), did you build the drone or not yet? let's speak on instagram : bilu.media, we can talk easier and I can help you with all what you need 😊

Hi my friend, you have to go the Receiver tab and select SBUS instead of CRSF because this is the correct protocol for the DJI RC2 and I hope you didn't cut the brown and yellow wires from the DJI air unit cable 😁 because they are for the comunication between the RC and the receiver on the air unit! tell me if that worked!

I have a complete step by step build video coming soon 👍

I finished my build and it flys really well! Thank you so much!@@bilumedia

maybe you are right, but I have it and this is why I am using it, if I am travelling I use a lighter and it works just fine, thanks for the tip 👍

Hi. So when you plug the battery it beeps, right? If this is the case then the unit is working, but when unplug it it doesn’t beep at all, this means that the battery is empty! It should work directly out of the box. I would fly a little bit, try at least 5 batteries and see after if something happens!

Edited response: I fixed it, I had messed up the + and - signs. It works fine now. Thanks for your help!

this is the iFlight M8Q-5883 gps!

Thank you ☺️

It is fantastic drone 🥰

Hi, mine is 14 cm, i am not sure how you measure it, i measured it from the back of the camera to the back of the air unit, so didn’t consider the parts that are in the units! But you can ask speedybee and they will tell you which one to use…

Hello, i have edge tx and i am Using elrs 👍

Hello my friend, thank you very much 😊, what you mean by the reference of the GPS? It is the iflight m8q-5883, but i recommend to use the new m10 gps instead of this one, iflight has it and few others too!

Hello my friend. The strap comes with the frame, actually i think you get 2 straps! If you didn’t get it, please contact SpeedyBee and they will send you the straps 👍, the strap size is 250mm

@@bilumedia Thank you very much for the prompt reply. The frame kit is on its way, I just checked the materials list included in the kit and I didn't see the straps, it's good to know that they are included. Thank you so much.

Hi. Yes it is necessary, at least in version 1, maybe the v2 doesn’t need longer one!

It can be a little cheaper to build it, but mostly it is a must have skill to have in order to repair the drone after crashing…

It is better yeah, but you don’t need that much power in most cases, f405 is very good 👍

حبيبي الله يسعدك😊

Hi. You mean the screws are too long and there is a part remaining on top? If that is the case then yes, but under the esc i put another rubber grommet, but it is small ! You can send me a picture on instagram so is see what you mean : bilu.media

I used an older gps here, but you can use the m10 gps, i used iflight m10 gps and it is very good 👍

@bilumedia the included mounting box that you used for the older gps is 18*18*8mm and the iflight m10 is 25*25*11mm. So I would have to figure out some kind of custom way to mount it?

only the drone is about 600 Euros and the goggles 2 850 Euros and the remote controller can start from 50 euros up to about 500 for a good one

Thanks 😁. Now I know, there are a lot of things that miss match like bolts and nuts . It is a mystery for me 😂

It should yeah

It should work without flashing anything! Check your wires, maybe some wires are touching! You can send me a picture on instagram : bilu.media

I think around 5:30 minute with the 1500 mah battery, just cruising…2306 will not make the drone fly more, just a little different

@@Jay_FPV2012 hi Monti, yea of course, give me your instagram, so i can help you better

@@bilumediamonti.fpv

@@bilumedia momti.fpv

@@bilumedia But I mean whit fcc and elrs

And the air Unit Not Lite up Must I have Full Charge the Batterie

Please send me a video with the problem on instagram because i don’t understand the problem : bilu.media

yes it is, but it should have the ELRS module not the 4 in 1! You can additional module after, but it is better to have the ELRS from the beginning internally !

I have it whit elts

Thanks 😁

Hello, be careful, i lost one drone because of the strap! I recommend you to use any strap that has sticky pad on it and the battery bad on the drone as well, started changing all my pads because the battery got loose on one of my drones and the drone fell 🤷‍♂️

@@bilumedia oh ok

You are absolutely right, my bad, sorry for that! If you need help with that part I can help you out ... I missed that completly in the edit !

@@bilumedia it’s ok brother you’re coverage is insane !!! I will be getting this quad end of month. I just got a speedy bee f7 AIO and the dji port is inoperative and won’t pick up VTX on beta flight nor speedybee app :(

Thank you very much 😊! I just took a look at your AIO and it seems that DJI should be configured on UART 6, did you configure it like this? You can give me a picture of your ports on Instagram: bilu.media. Let's solve the issue and get you in the air 💪😀

I guess you can connect a bettery and on the othe side connect 2 touching wires and see if the red light is on or not 😀

It saved me many times

Sorry for tour experience my friend, but this is how i create my videos for now… thanks for the feedback