Build A DIY Skateboard Storage Rack 

Materials = Planed Softwood 240cm X 9.4cm X 18mm (sides) 120cm X 9.4cm X 18mm (slats) Bit of card 16 X 70mm Screws Tools = Jigsaw Hand Saw Sandpaper Pencil Scissors 8mm Drill Cross head screw driver. Measurements Height = 120cm Width = 29cm Depth = 9.4cm Cut Outs 45 degrees 3cm wide 11cm Deep Cut out placement every 19cm

I made this today in an lazy Sunday afternoon😊 it didn't come out as nice as yours but, it does the trick! Thank you very much!

This looks amazing. Thank you for sharing!

i showed this to my step dad and he said "cool, now can i get that in american?"

Thank you for leaving the measurements in centimeters here in latam i tnk. We appreciate it. This motivated me to make one for my room. Regards

You made my life easier. Super cool been non stop thinking. Time to do. Thank you!

Nice and simple, thank you for the video bro 🙌🙌🙌

Your music selection is spot on!

Nice job you helped me out need a rack for my Kiteboards and this will work perfect

Awesome build. Really simple. Mission complete. Just finished up mine yesterday.

Brilliant mate, thanks for the tutorial! If you need an American toothbrush don't hesitate to reach out bruv.

Lovin the new neon shed!

I am going to try building this within the week. Have a Happy New Year 2024 Thanks for the video.

Classic !

Loved the video! Your channel is highly underrated. Keep up the great work 🤙🏼

Au naturel looks awesome - it allows the boards to show themselves off while reminding us they're all made from the same stuff. I know that moisture is a bit of a thing over there in the UK (the fact that the whole country is mossy and mouldy is a dead give away) so perhaps try a Satin Polycrylic finish. It won't turn yellow and will add a little bump/scratch protection but make sure you apply it in thin coats or else it may get a little tacky. You could always leave the inserts uncoated if that's a concern, but really it shouldn't be 👍

Nice work! I went through a very similar exercise myself to make mine, but I used a load of 9mm MDF I hade lying around plus some bits of 2x2 pine. The trickiest bit like you say is finding that balance between how much space you need between boards and how many you can fit in the height you have. They always look good parked in a rack like that though 😎

Thanks for the tutorial ! I’ll make a similar shorter assembly of 6 slots for a combo racking of skate, long board and snow board. Just need to measure the perfect space between board as it will uniformly fit, either it is a skate wheel base or a snow fix on the top

Nice work!! Thanks for the video

Looks sweet. I’m starting one now.

So excited to see this tutorial...looks like I have a reason to buy a jigsaw now...great video!!

Done! Dad followed your vid and made me two!

Brilliant.. Thanks!

Awesome video!

Do you feel like the depth of the cut-outs are important to prevent board warpage from long term storage?

Dope!! Thanks🔥

This is dope. I’ll have to build one like this soon. Does the MDF get beat up too easily? I’d prefer to use it since it’s cheaper in my area.

👍 like the yoga video too, it reminds me to do it as always get tight in the legs for not stretching properly, maybe do a skaters fitness/body maintenance video pretty regularly, would be cool as old gits trying to skateboard need a bit of extra help 😆

Good stuff, now I’m gonna have to translate your measurements into American.

Great! What´s the depth of the cutouts 30 mm x ? (depth)

First to comment lol, love ya work Mr Bishop!

Buy some mineral oil and rub it heavily all over the rack. It will seal it up and make it last forever

Hi :)