BUILD A DUAL PERMANENT MAGNET ROTOR WIND TURBINE (PART 19) 

You're hilarious!!! These are so much fun to watch. Thank you!

The world needs more dudes like the mud man, cheers

about 7 min into this video and I was like yeah, I like this guy. subbed

Thank you Muddy

Love your since of humor! Its the kind that makes me want to learn and continue watching your videos😁. Great job Scott.

I love it!

Hey Scott I really enjoy your videos. Especially the great ideas you showcase.

Wery great idea.😃

Great work 🌹

Well done ... You made it look easy ....well thought out. Good on ya !

SWEET !!!!

Smart and funny video.. very good!!!

That turned out Good! Good Job! Looks Great!

good job my friend.

You sound like people are honored to be around you

Im looking at the right of my screen and all those beautiful video,s are all right there step by step to a better futur and a whole lot of fun ; ) Green winds here we all come!!!

I like that fly zapper, classy.

haha! ha, very good Muddy!

good idea

thank you so much, Sir.

Mr.Scott Brown, GOD Bless you.You are really nicest from the New York.

Well Done Brother Scott, Your , Fix IT

Love this.. All around :)

good job scott this is real professional keep up the good work.joe

you give me some great ideas how to build my generator. thanks man. you're awesome.

Good job Thanks

Thank you so much sir 🙏🙏🙏

this is awesome!

You're a purty handy guy, Muddy.

I cant wait to see it run the first time on a windy day! That is going to be so epic!

The Best I've seen Yet , Certainly Explained Better then Most .. Thanks for Posting , if Not for Innovators Such as Yourself we would be in debt up to Our ears, But With these Kinds of Innovations , I hope the Energy Companies Know they are not the ONLY GIG in town .. Thank You

i love all your videos

That is pretty. :) Thanks for sharing your knowledge.

Keeping the magnets cool is a great idea. I never knew that they got hot. Thanks for the video.

U r a scientist...Love you ,,from India.

SCOTT,You made a great video ,you explain it so well every step of the way.. I am an old welder 72 and love learning something new about every day..PLEASE keep going ..I hope some young guys / girl learn from you ..you teach well man even how to stick that tape 🙏💚💚💚

you make it so simple to understand

Very good job

Infomatic Thank you GOD BLESS YOU TOO

That's one nice looking rotar!

Makes sense to me! Thanks brother!

Thank You Sir!! I throughly appreciated and enjoyed this video even though I have no intention of making, using or helping build one of these beautiful pieces of art... God Bless You and Yours as well as the good people who follow you and obviously love you so dearly...

Muddy, I really like all of your videos. I think people like you that educate us out in RU-vid land are providing a valuable service to humanity as a whole. I must say. I'm a rather unconventional man and I find myself not willing to conform to the ways of others. With that said, I'd like to ask a few questions of you. I have already acquired 56 of the same magnets that you have, giving me enough for 28 sets of magnets. With my unconventional and nonconformist ways,I'm doin things different

PRODIGY. You are great sir. Method of presentation is very good. God bless.Gurinder jit singh.From jalandhar punjab.

Thanks

You just made a magnetic wall clock modern art!

Well muddy im glad you got a video of the product thats gonna become the first of many demos that make heating some of the house a reality . Or Doctor Mcgovern has some great plans too he,s an engineer him ,yup make it good on the first try cause some are comming behind.lol

Gets all the oil off, stresses the importance of cleaning up minute amounts of oil from skin then grabs the magnet and gets oil all over it before installing it. What a genius!!!!

This is quite interesting, I saw a video series a while ago where a guy was showing everyone how to convert a ford truck alternator into a mini wind turbine. he also used stock PVC parts to make the blades and case.

thank you

Thanks for making such detailed videos, awesome. Still have the rest to watch, but I was thinking of doing a serpentine style rotor. A neighbor does scrapping and he has a bunch of multi stand wound wire where it looks as if it would be equivalent to 14 gauge. then wind it to 3 phase set up. I was also thinking of using a 8-5/8 stainless steel plates 1/8" thick, where the corner of magnets would be about 1/4 apart. Watching your videos I am now wondering if this would work. this set up would fit into a squirrel cage (10-3/4"H X 11-7/8"D weighing maybe 2 pounds) I was going to use for a VAWT design to go on top of my travel trailer. Not being an electrician, and my lack of 100% understanding in this, suggests that what I was going to do would have been a waste of material. Any suggestions or ideas on this. Again thanks for the great in-depth videos.

Tanks brother de new laredo mex

magnet rotor

Hi Muddy Man, Sure you got this axial motor video a great tutorial for everyone who would like to try like me. Can you be so kind to give us info on magnets you used and where we can buy them. thanks and more power and hope to see new designs youve been cooking

Great to see this good work. May be advisable to add a mechanical attachment, a dome allen screw or three so as there is thermal expansion & contraction between the GRP resin & magnet & cast steel brake disc, so the disc does not shed the whole set up affer a heavy frost or a very hot day. Or may be some light twine, threaded through the vanes of the disc & across the resin.....dacron or may be dental floss and finish of with a coat of super glue, to fix the knots.

Life is like a story. Important not in how long, but in how well.

I know you don't need another compliment but I have to say excellent work and thanks for sharing.

I once saw a talk about an old windmill producer who's windmills were the best in their day. The person giving the talk said that the blades were designed to slow down in a hurricane. I don't know exactly how it worked, but I do know that the when I looked up the company they did in fact exist and were highly praised and that many of them are still up and fuctional today and are sometimes sold for a lot of money. I wish I could remember the name.

Making a magnet rotor (out of a brake rotor) to fit on a standard hub is FRIGGIN' GENIUS!

great information Muddy , magnet recommended places to purchase ? thanks RD

Where did you get your magnets, & the template, that is sick cool, hope you do a video of building a turbine with it

I ask myselfs, when short the coils outputs, can you still turn the magnet disk? normally this get's very heavy to do but now without metal in it how it does then. I had a idea to make one, but a vertcal one, nee a good design for that so I get efficienty as high as possible. Some do use a oil drum other bike wheels, Maybe you now a good one.

Interesting. Lot of powerful magnets, should make a ton of power efficiently.

plaes explain how to align the magnets (north-south posisitions) and why, thanks, jeff

I started building this turbine. Got the stator done and decided not to finish it because I determined that I would need a 100 ft. Tower. I live in the middle of the woods. Now I have 24 epoxy coated 1”x2”x.5” magnets for sale so if ya know any body that needs some magnets and a stator.

Thanks Scott. You have your shit together my friend! If I knew where you are, I would take you for a beer.

intéressant

Thats actually a pretty good idea. I've seen one here on YT like that, but the man never posted the results.

Now that's struggling, had you consider other alternatives, like a lathe ?

@muddymuddymuddman G'day... Ah, me hat's off to ya Scotty ! What a delightful clip..!! What a brilliant production process...!!! Superb effort, all round. I like it . And I hìt the button. And it goes to the Favourites List. Yay Team..! I can't wait to see a clip of your first SunFoil...; Yeee Haaaa ! Respectful Regards, Chris.

Awesome video series. Hope you don't mind that I shared on my facebook. Quick question... where are you finding your magnets? I've been looking for them in bulk and I'm worried that the ones I am finding online aren't strong enough to do much more than hold a crayon drawing to the fridge. Pointers please and thank you?

Another question Muddy...Like I said, I have 56 of the magnets (28 sets) I'd like to base my PMG on Markp0177's generator. Although, it wont be exactly like his. Rather than have a single magnet per coil like his does, I think the opposing magnet idea is a better one. His has 28 magnets and 28 coils, yet is 2 phase. I'd like mine to be 2 or 3 phase (preferably 3 phase) Have a look at his design and let me know what you think. Be prepared to answer a few more questions.

question please ' howmany coils i have to do for this 12 magnets rotor? Thanks

would like to know, if i measured the stator coil of a static (unpowered) motor, and i get a resistance reading on that, ...... can the resistance be calculated for estimated watt output once plugged in ?

Metal surfaces heat sink and moisture condenses on the surface, especially sanded surfaces

please were can i buy magnets like yours on the internet i live in the Caribbean were i get lots of wind

This guy has a genius I.Q....isn’t it obvious?

Question....what would the output be , ballpark, if this were a single rotor and not dual? The ceiling fan wind turbines could be called single since they don't have magnets opposing them and wired properly they put out about 2 amps. Would a single rotor and stator, the way you have made your coils, generate 10-12 amps?

Continued...I plan on, rather than making a flat stator,one that is a ring with the coils standing on edge. The magnets will be on opposing sides of this ring, standing on edge.Now I have to ask you. Should I make 28 coils? If so, how far apart should these magnets be? Meaning that with 28 magnets standing on end there would be 1 inch between the north and south ones around the circumference of this ring. With that config. how big should the coils be in relation to the magnet size?

Hi scott, I really like your pragmatic approach on your project and also the sound of the wind blowing at the background ;-) Can you give me some info about the power you want to create with your setup? I an thinking of making a diesel engine powered generator ( not enough wind here...) and would like to learn how to calculate things like windings, rpms magnet field strength etc etc. Regards Paul

¡Muy bueno, boy! Congratulations! God bless you!

Sir in my turbine if i have 12v current regularly can direct LED bulb? Or inverter?

Could you please tell me the magnet type and dimensions?

Hey Scott Brown how is the wind turbine still working

what difference in power would it make if I use 3/4 inch thick magnets instead of 1/2 keeping the same design and same size coil? It says 1/2 inch has around 85 lbs pull and 3/4 121 lbs. How big would my wing span would have to be?

please were can i buy magnets like yours on the internet. my electric bill is very high so i need a other way to net electricity

Congratulations friend, very good your video, like to which the magnets measurements, which car is this brake disc, I am very grateful for your attention.

HI MUDD IS POSSIBLE YOU GIVE SOME IDEIA ON DIMENSIONS FOR MY COILS,I HAVE N42 GRADE 1/4 SWEP ARC NDFEB MAGNETS 1.57" at the wide end, 0.78" at the narrow end, 2" long, 0.25" thick,I NEED TO DO THE FIXTURE FOR THE COILS BUT I DONT KNOW THE DIMENSIONS FOR THIS COILS.THANK YOU.

Do you ken the field strength of them things

I guess it is a good generator design after all.

What was your output amps and Voltage on this wind turbine?? I’m planning to build one, but need to ensure it is strong enough to charge my 48 volt batteries.

How much voltage/amps dose it produce ?

friend excuse me, i have one qestion, where aye you buy magnet type...

"I'm Scott Brown with Greenwind & other home energies". I dont know if its just the way you say it or the way its written out. But that is one catchy title. And I love neodimium magnets. The problem is they dont like me. And I got the bite marks to prove it. But anyways, someday I'm going to figure out how to utilize these magnets along with other natural forces and laws of physics and create a low intake - high output energy scource. Anyways, this looks very cool and I'm gonna shadap now so I can finish watching it 👍.

please were can i buy magnets like yours

Use steel rotor as mold to cast an aluminum rotor to cut weight?

Isn't that a 2 way street? It seems to me that using a heavy rotor will smooth out the lack of consistency with the wind by continuing on it's own inertia, but it will also take much longer to get up to speed. BTW... Thanks for posting these videos. I enjoy them.

nice video . but i think there s something u dont know about magnets. the magnets are magnetic because the flux wants to go treu a material as easyest and fast as possible. Hence it pulls on metal.(fero) because it lets the flux go true eassy. but when u put a magnet on a metal plate the fluxfield collapses because it found a way to go eassyer true metal then true air (permeability) lets give the field size of a magnet u hold in your hand a number lets say 10 then when u put that magnet on a metal plate the size of the fluxfield wil shrink allot maybe by half because the fluxfield wants to go true the eassyest material to go treu. then it wil be like size 5. if you want to build a windmill to produce electricity you should have magnets mounted in a ertalon or other strong plastic disk that way the fluxfield wil be mutch bigger making a bigger difference in the coil making a higher voltage and bigger amps. Voltage and amps it creates depends on .... - the strengt of the magnet N value (example N43 ) - The speed of the change going from N to S the faster the change the bigger the induction - the size of the fluxfield covering your coils (to big coils or to small magnets wil get you low V and A) coils shhould be made depending on the size of the magnets. -The ammount of windings and gage in your coils.(more windings more volts bigger gage bigger amps you can draw if there s enough wind to keep it spinning offcourse ) the more u draw power the more resistance it wil have on the magnets making then stop eventually making your proppeller stop. Second you should try to have all components in your windmil made out of NON electric guidng materials (except your coils offcours) because they create dragg. a magnet has no effect on copper of aluminium when static (not moving) but when u move a magnets fast over aluminium or copper plate u wil feel it resists the movement like its braking. so if you make around the stator a aluminium frame or tube it wil dragg out your windmil making it run slower. Olso the axle of your windmill should be a NOn ferro mettal like aluminium because if its ferro it wil pull on the flux field of the magnets making them smaller. last but not least its always best to use ass much as possible plastic in the whole design of the generator then it wil not cause dragg and it wil not pull on the fluxfield of your magnets. I have not made a windmill with all these things in mind but its allot of stuff to keep in mind to make it as efficient as possible. There s allot more to keep in mind but this is a beginning of a efficient windmill.. cheers and goodluck.

I would like to see a diagram of the magnet showing the N/S poles.... I get the impression the poles are not at the ends -like a bar magnet- rather they are on the two largest sides.... but not sure..

please were can i buy magnets like yours on the internet