How to build your own workshop or garage storage cabinet!
Tool List:
- 1 5/8" deck wood screws (deckmate brand used in video)
- drill w/ T25 torx bit attachment
- screwdriver
- 2 wood clamps
- circular saw to make miscellaneous cuts as needed
Material List/Cost Breakdown:
7 - 7/16" OSB 2x4 = $35 (base, sides, shelves, and doors)
9 - 2x4x2 = $20 (support ledgers)
3 - 2x4x8 = $15 (shelf stiffeners)
1 - 7/16" plywood 4x8 = $15 (cabinet backing)
4 - roller wheels w/ brakes = $40
2 - cabinet handles = $15
6 - cans spray paint = $40
Total Cost: $180 + TIME
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*
Disclaimer:
Due to factors beyond the control of Engineered Mojo, I cannot guarantee against improper use or unauthorized modifications of this information. Engineered Mojo assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Engineered Mojo recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Engineered Mojo, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Engineered Mojo.
8 июл 2023
