Build Shaker Cabinet Doors With Table Saw | New to Woodworking?

Подписаться 343 тыс.

Просмотров 1,5 млн

50% 1

In today's video I'm going to walk you through how to build a Shaker cabinet door with a table saw. If you're new to woodworking, then you know what it's like not to have the tools you want or think you need. That's why I wanted to do a video demonstrating a way to build Shaker cabinet doors without a router table, special bits, or a dado blade, but by using the standard 10 inch blade in your table saw.
MY POWER TOOL PLAY LIST: • HOW TO USE A CIRCULAR ...
Amazon Affiliate Links to Tools I Like and Use (THANK YOU for supporting THA!)
HAND TOOLS:
Speed Square: amzn.to/31fv02z
End Cutting Pliers (they don't sell mine anymore): amzn.to/31hq1yt
Estwing Hammer: amzn.to/2VVnHMr
Chisel Set: amzn.to/2BjHH1H
Nail Set: amzn.to/2BdxCU4
Pry Bar Scraper (better then mine): amzn.to/2oGhKXu
Tape Measure: amzn.to/32gdEUt
15-Inch Utility Pry Bar: amzn.to/2IPlHQs
Level Set: amzn.to/33C56rD
POWER TOOLS:
Drills: amzn.to/2nDsqFV
Jigsaw: amzn.to/2AGpGua
Porter Cable Belt Sander: amzn.to/38D3kJe
Circular Saw: amzn.to/2Pvto2C
D-Handle Router: amzn.to/2ol4mYx
Small Router: amzn.to/2nEjDUe
Plunge Router: amzn.to/2LK29yQ
----------------------------------------------------
Follow me on:
INSTAGRAM: / traininghandsacademy
FACEBOOK : / traininghandsacademy
My name is Josh Fedorka, and I’m the founder of Training Hands Academy™. I have been a carpenter and woodworker for over 25 years. I have also held certifications in home energy auditing and have built several LEED certified homes in New England.
God has gifted me with many “hands on” skills and it is my calling and purpose to share those skills by teaching others. Whether it is to seek a career in carpentry, become a general contractor or improve one’s DIY skills and knowledge, the motivation behind THA is to help others successfully learn how to work with their hands.
#buildshakercabinetdoor #tablesaw #newtowoodworking

Опубликовано:

25 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@TrainingHandsAcademy Год назад

*Our beginners handheld routers course is now live! Check out the online course here ---> **bit.ly/3DcIeE3*

@kirk2421 5 месяцев назад

Any recommendation on type of wood to use for the Shaker cabinet doors? Home Depot & Lowes are my stores.

@TrainingHandsAcademy 5 месяцев назад

Poplar@@kirk2421

@robertbehrens7501 3 года назад

Not only are you a skilled carpenter, but you're a great teacher. Fantastic pace, detailed without being overwhelming, and tailoring to the beginner without being condescending. One of the best instruction videos I've seen and I've been a teacher for 20 years. Thank you for teaching me! Oh, and your shirt is cool.

@TrainingHandsAcademy 3 года назад

Wow, thanks!

@fieldsfury Год назад

Agreed! This video alone and the excellent instruction will save us thousands because I feel confident to make these now. Thank you!

@thewestendwoodworker 11 месяцев назад

Amen to this comment! Such a great teacher! Thank you!

@TheAnnej73 9 месяцев назад

Indeed. I learned so much from his 8 minute video... I had to subscribe.

@mattl9704 3 года назад

One of the most clear, concise, and simple tutorials I've ever seen. Bravo!!!!

@charlesfedorka9186 4 года назад

Not only are you a good "craftsman", but a good teacher. A good teacher knows his stuff while relating the need to work safe. Perhaps the most important aspect of "teacher talent" is this fact. It's okay to make mistakes. They are inevitable, they are for learning, and they can be overcome. Great job "teacher".

@TrainingHandsAcademy 4 года назад

Those are very kind words coming from the best teacher I had! Love you dad!

@tompetty3742 Год назад

@@TrainingHandsAcademy This comment and reply brought tears to my eyes. I lost my dad at young age, and often tell others, " my dad would have loved YT, and made videos".

@andrewmartin147 3 года назад

for anyone that doesn't have a drill press Kreg makes a jig for hinges that works with a normal drill. It's a life saver!! great video btw!!!

@TrainingHandsAcademy 3 года назад

Awesome, thanks for posting that!

@sirawesomenessi1796 2 года назад

After trying to hunt around forever to find a good price on some cabinet doors, you made me realized I already owned everything I needed to do it myself. Excited to give this a try!

@-clif1987 3 месяца назад

How did it go? I’m about to dabble myself.

@ishtorres6574 3 года назад

Thank you for keeping it simple and getting right to the point. I need a higher cabinet base and didn't want to have to pay a fortune on custom cabinets.

@NickiJones 3 года назад

THIS VIDEO WAS PERFECT!! I'm building out a skoolie. I'm a beginner with all the tools but little knowledge. Thank you so much! I feel so much more confident after this video.

@joelongstaff7601 Год назад

WOW Someone teaching CRAFTMAN ship. In the days of pocket screws and disposable everything, a craftsman is so nice to see. Well done Sir.

@TrainingHandsAcademy Год назад

Thank you Joe!

@Vaibhavkhairnar19 3 года назад

Easy, quick and simple to understand instructions! Amazing video.

@hueybui 3 года назад

Loved the tutorial! Exactly my kind of learning. Straight forward and to the point. Not a bunch of fluff! Thank you!

@TrainingHandsAcademy 3 года назад

Thank you for watching Joseph!

@miketony2069 2 года назад

There are some very good trades folks on RU-vid. You are by far at the top tier. What I like about your videos are that they are no nonsense and practical. You get straight to the point without a lot of fluff. You also have a teaching spirit- you clearly are a professional and an expert YET you make the viewer feel very comfortable allowing us to ease into the lesson. Not everyone does that. I've learned a ton from your videos. Please keep producing!

@TrainingHandsAcademy 2 года назад

Thank you very much for your kind words.

@brittanifenimore7047 3 года назад

Used this video to completely redo the cabinet fronts in our conversion van. We had very minimal table saw experience prior but thanks to this video and your excellent teaching skills they came out wonderful. Thank you so much!

@TrainingHandsAcademy 3 года назад

That's so cool! Thank you for sharing Brittani!

@WoodGrainJunkie 3 года назад

Great tutorial! I'm getting ready to make a couple shaker doors so this is helpful as I think of my dimensions and process. Thanks for the video.

@seidlywhiplash 3 года назад

Damn bro, that was a sweet video!! That was artful woodworking. I'm planning to redo our 2008 vintage cabinet fronts with this type of style. Thanks for showing me how to make a tenon on my table saw!!

@neilforehand1121 3 года назад

Been wanting a new table saw, had mine since the 80’s. Great reason to buy one since I’m going to redo the kitchen cabinet doors.

@debbieschaberg1609 3 года назад

I forgot to say that I watched several different videos on making shaker doors and chose yours because it was so easy to understand and follow.

@johndeaux9987 3 года назад

Same here! This video was so easy to follow compared to some with special jigs and cutting boards upright etc.

@ilive4livemusic 4 месяца назад

Ditto

@mastaace46 3 года назад

Nice work. This video was simple, clear, straight to the point and full of good tips and advice. Thank you!

@RealMommyLife 2 года назад

THANK YOU!! I was feeling really overwhelmed and thinking that I would be struggling greatly to make these without all of the tools. You made all of the steps so easy to follow. Thank you for making this video.

@TrainingHandsAcademy 2 года назад

You're so welcome! Let me know if you have questions once you start building. I'm on Instagram too so you can send pics or videos. :)

@jbonegw 3 года назад

Clear, concise and straight to the point. Well done. 👍

@bombpatrick8950 2 года назад

Love this! Always had hard time centering the grooves for the panels. Awesome tutorial!!!

@allisonburton2343 2 года назад

Love this! Would love to see a video on how to make them with a router table next!!

@blaster-zy7xx 27 дней назад

As most have given positive comments about your good information and effective teaching, I would like to add that your video production, camera angles, and editing are top notch. Most people do not appreciate the time and planning it takes to set up a video like this and edit it down to such a well paced instructional video. Well done.

@TrainingHandsAcademy 27 дней назад

Thanks for this comment!

@carefuld9779 3 года назад

Thank you, for being clear and concise. And also acknowledging that not everyone who watches diy videos have the budgets for professional tools. BTW, you are an awesome teacher...you provided options in making shakers doors. Cheers!!

@TrainingHandsAcademy 3 года назад

Glad it was helpful and thank you for the kind words. :)

@Bekim8310 3 года назад

This is the best video I've seen on how to make shaker style doors. Thank you so much!

@davidsmoren4818 3 года назад

@freeq1829 2 года назад

Thank you for this easy to follow guide! Will be trying to make some cabinet doors soon :)

@bartcountess6145 3 года назад

No nonsense, to the point video. Excellent instruction.

@tonkaGuy888 2 года назад

Outstanding tutorial. Simple but thorough. Thank you!

@dontriskett8098 Год назад

Fantastic tutorial! Very clear and concise. Great work!

@infiniti2015 4 года назад

Wish I had this content when I built my first set of shaker doors. I subscribed to your channel after only one video, which is a first. Thank you!

@TrainingHandsAcademy 4 года назад

Thanks for the sub!

@rickmacer4747 3 года назад

You do a great job explaining these techniques, thanks and keep the video's coming!

@musicalnomads 2 года назад

Wow, clear, concise, educational and super helpful. Thank you!

@josephmelcher1312 4 года назад

You make me want to get a table saw now, Thanks!

@TrainingHandsAcademy 4 года назад

Ha!!

@debbieschaberg1609 3 года назад

I’m 72 yrs old and have never done anything like this. So far so good. Getting ready for tenons.

@saeedzafar7041 3 года назад

I built my first woodworking project, a table, when I was 71. Since then I have made a bookshelf with dado cuts, a china cabinet with glass panel doors, a solid oak bathroom vanity with raised panel doors (my biggest project so far), and an antique wall clock. I am now 73. You at 72 can definitely do it.

@David-hm9ic 4 года назад

After probably 10 videos on shaker doors your is hands down the best. Thank you! No doubt I will refer to it many times as I make doors for my shop cabinets. Maybe the wife will even let me make new kitchen cabinet doors.

@TrainingHandsAcademy 4 года назад

Wow, thank you David!

@arceliacody5151 3 года назад

Well informed. Thanks a million. Keep them coming.

@TrainingHandsAcademy 3 года назад

I forgot to mention that I used Poplar (you can also use Maple) for the styles and rails, and I used Birch plywood for the panels.

@drmachinewerke1 3 года назад

Do you have room for spacer balls. Or are they needed on shaker doors

@TrainingHandsAcademy 3 года назад

@@drmachinewerke1 Plywood doesn't move much, so spacer balls are not really necessary. However, if you are using solid wood for the panels, then they are a must.

@shelbihoo 3 года назад

I'm trying to search for these rails, but I can't find them anywhere.. what do I search for?

@TrainingHandsAcademy 3 года назад

@@shelbihoo What are you trying to search for Shelbi?

@patriciafonseca3902 3 года назад

Hello. I'm having difficulty to find that wood in uk, can I use another type of wood?

@ronmurphy4234 3 года назад

Great video, the only thing I would add is using a small dab of glue in the middle of the center grove of each side of the panel to prevent it from making a sound when closing. But just a dab so it can still expand and contract.

@mike_williams 3 года назад

I was down in my workshop, looking over all the bits for my handheld router that I've never used, trying to figure out how to build doors like this. I came back to the computer to get a lesson, and now that you showed me, I'll go use the table saw. I'm already a little bit comfortable using it, and you gave me enough information to do this project. Thank you!

@TrainingHandsAcademy 3 года назад

That's great Mike! Would love to see what you build. If you are on Instagram send me some photos.

@lourdysaint-jacques5142 3 года назад

I'll be dealing with making some shaker cabinet doors shortly, and your video helps me a lot. thanks a lot sir.

@frankvucolo6249 3 года назад

Great video and very good instruction. This is a perfectly acceptable way of making a small cabinet door, but keep in mind this is the weakest of the three commonly used methods. So if you are a beginner (as the video states) don’t hesitate to do this. You will be using what’s referred to as a stub tenon. Plenty strong enough. But if someone kneels to access a lower cabinet and then uses the door as a crutch to get up (not that uncommon,) the upper joint on the hinge side takes a lot of pressure. Often it is the hinge that gives first, though. So a cope joint, made with a router bit set, is the next strongest and the method found in most “factory” doors. Here you have the same stub tenon, but additional glue surface where the rail copes the stile. The strongest joint would be a full mortise and tenon. Here, the long grain glue joint on the mortise and tenon cheeks is virtually indestructible, if made right. An upgrade to the stub tenon would be to consider 1/2” grooves (grooves, not dados because dados are grooves that run across the grain, usually on the face of the board) and stub tenons. That 25% extra glue surface, per joint, goes a long way. I don’t mean to be critical or disrespectful of the video. It is fine and well explained as an entry level method. Just want to give some vision to the beginners as to how their door making skills will evolve, and the theory behind it.

@TrainingHandsAcademy 3 года назад

Thanks for the info!

@bernarddouthit478 2 года назад

Frank - I need to make 10 to 12 cabinet doors for a rental property I own. I've built several boxes with box joints. Is there a video you recommend that shows how to make these doors with a router and/or dados as you recommend?

@frankvucolo6249 2 года назад

@@bernarddouthit478 Hi Bernard. Woodworkers Journal has a good video on making cope and stick joints on a router table. You will need a router table - can’t do these free hand with a router. I have a video on my site showing mortise and tenon construction with a handheld router and table saw dado blade. It’s for passage doors, not for cabinet doors, but the process is the same, scaled down. All that said, nothing wrong with the techniques in this video for rental property doors. You can up the process with a dado set if you have one. That will speed up and make more accurate the production of all those stub tenons you will need. The front end of my video on hammer veneering will give you a look at what the mortise and tenon cabinet doors look like, but is probably an overkill joint for rental property doors. It is usually a technique reserved for high end furniture or where the strength of that joint is really needed. Hope this helps.

@intigomez2666 3 года назад

I have to build 8 of those doors for a client next month .

@aliciadaugherty1915 3 года назад

Hi Josh 😁 ! I am paying attention and when they restore my garage as it burned , I am going to put into practice what I have seen in your videos ! You are always in my prayer 🙏🤗 ! From Portland Oregon !

@CM_STILL_PLAYING Год назад

I love how quick you explain this and how clear!

@willmen08 3 года назад

Used your exact method to make a friend's doors in his kitchen. I don't have the same clamps you do but I figured out that, when gluing, I could place a board underneath my rails and clamp it down and that kept the door from twisting. Thanks! I just used Pine wood, I hope it lasts (fingers crossed)

@tonyhagey8696 2 года назад

How are they holding up

@willmen08 2 года назад

@@tonyhagey8696 I think they’re doing ok. I haven’t heard otherwise. 😅

@mrcoz1764 3 года назад

I have to build 14 doors and 3 new cabinets to remodel my kitchen in a condo in Myrtle beach using this style door,,,the only difference is to avoid that cheap hollow sounding door ,,I`m gonna use 3/8`s birch for the panels for a more denser sound,,I got till May to have them done and painted

@ungratefulpeasant8085 2 года назад

Good video, reminded me of growing up watching my dad mill and groove all his work on a tablesaw. He was a carpenter for 50 years and I never seen him use a router or a jointer.

@josueayala9106 3 года назад

this is by far one of the best DIY videos i have seen so far. Thank you very much!!

@danielconaway2055 2 года назад

I'm going to try to adapt your method to make a larger (28"W x 56"H) two-panel door to cover an attic ceiling hatch ... I like the simplicity of your design, and believe it will mod to a three-rail version --

@danielconaway2055 8 месяцев назад

Three rails worked! -- I dry-fitted all the pieces, then glued-and-clamped the CENTER rail to both stiles FIRST so that I could then slide in the two panels, one from each end. Toughest problem was cleaning up the tenons with a chisel because my saw-teeth were "ATB". Thank you for an EXCELLENT instructional-video!

@robertmullins922 3 года назад

I want to stain it

@tigerwarner 3 года назад

Excellent video! Explained everything very well and had great camera shots showing what you’re doing. Very professional, thank you.

@MordorOrc59 Год назад

Simple, but very clear tutorial!

@matthewdaugherty5207 3 года назад

This was so clear and helpful, thank you!

@gidden2000 3 года назад

It has been years for me. Thank you for the great video.

@jefftucker9225 2 года назад

I have the tools but never thought about making cabinet doors until we started remodeling our kitchen and pricing out doors, couldn't believe how expensive they are, glad I found your video, thanks for the upload

@jessaminutesir 2 года назад

Thank you so much for this video. It was the most comprehensive video I’ve found. I was able to basically follow along step by step and I now have two beautiful shaker cabinet doors.

@TrainingHandsAcademy 2 года назад

Great to hear!

@toddstapley7185 3 года назад

Great video, fast, concise, clear. I've watched it a few times before I try my first doors and I'll let you know how it went. Pretty confident thanks to your video!

@TrainingHandsAcademy 3 года назад

Awesome Todd. Find me on Instagram if you want to share photos or get help.

@janettaylor6624 3 года назад

Thank you. Well presented. I am thinking of making a wooden door with glass at my back door and this is very good teaching instructions.

@chalyfalcon24 3 года назад

Very clear explanation man,I think it's always easier to do this when you have lots of space in your car garage as well as having all the right tools to do the work, unfortunately not everyone does. .

@wcroach1 2 года назад

Great job explaining the process - thank you so much.

@markalexander6517 2 года назад

Brilliantly done. Clear and concise. Cheers!

@jackstephan5851 Год назад

Terrific training video! Well explained and demonstrated, Thank you!

@juliodavid49 3 года назад

Thank you, thank you, thank you for this well done video. I spent hours yesterday with a router bit trying to do this and I finally gave because it just was not coming out right. Saw your video this morning and did it in about an hour. They came out perfect. Thank you again. Also saw your video on making stringers, that's going to be my next project following your video. Excellent videos.

@TrainingHandsAcademy 3 года назад

You are very welcome. Thank you for watching and supporting the channel!

@ChadPalmer 3 года назад

Great video and excellent evacuation on explaining what your doing. Thank you 😊👊🏻🇨🇦

@dsweetman716 2 года назад

Great simple video. Very clear and concise. Thank you

@davidfleuchaus 2 года назад

I enlarged a doorway into a walk-in attic off of my kids' bedroom. I need to make one of these before they return tomorrow. I bought all the materials but had no idea how to do it until I saw your video. Thank you.

@mikemike7397 3 года назад

Great video. So easy to follow your directions, and now I feel Confident.

@Graysail0r Год назад

Just wow. I built my house, did the electrical, HVAC, plumbing, wood and tile flooring, BUT I've not done much 'quality' woodwork. Now retired so I'm building up my shop and learning how to do things (like cabinet doors). I have lots of books, but - your video just makes this process so much easier. Great JOB! Subscribed and thumbs up!

@TrainingHandsAcademy Год назад

I'm glad you found this helpful, and congrats on your new home!! May God bless your home and all those that are in it.

@shopnwoods9901 2 года назад

Great tutorial. Very quick and thorough. Thanks

@subirdas0 3 года назад

Very impressive demo of cabinet making.

@andabien3 3 года назад

Excellent explanation. Clear and concise.

@whatsupwithsteve 2 года назад

Great video..:) makes me glad I have my router though! I found, especially with soft woods like poplar that a 1/2" tenon adds much more strength than the 3/8". Happy woodworking all!!

@peterbonifacio3288 2 года назад

Very good video and complete instructions to easily follow the steps for making a shaker door. Thank you.

@94233psu399154112333 3 года назад

Nice job. You’re a good teacher.

@roblee3518 3 года назад

This was so helpful. I borrowed a table saw. Bought common 1x6 lumber and plywood. Produced 18 doors. Finished and hung them. The kitchen turned out great. Thanks for making this video.

@TrainingHandsAcademy 3 года назад

That's awesome! Nice job!

@pappijoe1965 2 года назад

Great job. I appreciate the way you presented all the information. Thank you!

@vegasmainiac7745 Год назад

This is how I was thinking of building mine so the extra tips I found in your video mean a lot. Thanks!

@bradherring4698 6 месяцев назад

Great video. Excellent teaching. Thank you.

@MrDorf007 2 года назад

Thanks for keeping it easy and simple for guys like me !!!

@blackstonecap 3 года назад

Thanks for this video. I need to make some doors but have been putting it off This helps

@JamesHarris-xg5bq 3 года назад

Just finished making my shaker cabinet doors using this video as a guide. Agree with the comment this is probably the most concise and informative RU-vid video I have ever seen.

@TrainingHandsAcademy 3 года назад

Thanks James!

@PPMOCRG 3 года назад

I want that shirt! Thank you for this useful video.

@brianlongmire5846 4 года назад

Great video, short and too the point. Gonna use it to make my doors. Thanks

@timbointexas1440 3 года назад

Extremely well done video. Great carpenter and teacher

@simonfreeman148 Год назад

Good ole RU-vid always has a great sensible and informative tutorial. Thanks for being that guy 👍😎

@TrainingHandsAcademy Год назад

I appreciate that!

@michaelhurt4490 3 года назад

Very good tutorial. Wish more people would get straight to it like that.

@mtndew3985 2 года назад

Absolutely fantastic instructor!

@jeffbrewer8810 8 месяцев назад

As a hipster friend of mine was fond of saying…You Rock! Nice video. Easy to follow. Straight to the point. Thank you.

@TrainingHandsAcademy 8 месяцев назад

Ha, thank you for the comment!

@Mainbusfail 2 года назад

There are those who do, and those who teach. Then you have THA showing everyone you can do both. All i have to figure out is, how to properly learn all the stuff you do! Another excellent video!! Thank you for doing these for guys like me.

@TrainingHandsAcademy 2 года назад

You are very kind Todd... thank you. I'm glad you are learning my friend.