Build the Lamborghini Miura - Pack 12 - Stages 92-100 - The Completed Model

Подписаться 75 тыс.

Просмотров 13 тыс.

50% 1

This excellent 1:8 scale model is available now through
www.agoramodels.com
For my Amazon Store and Merchandise, head over to
linktr.ee/worldofwayne
00:00 - Introduction
01:03 - Stage 92 - Fitting the Rear Number Plate and Grille
04:07 - Stage 93 - Assembling the Boot Compartment and Installing the Rear Lights
07:23 - Stage 94 - Fitting the Window Grille and the Boot Compartment
11:43 - Stage 95 - Fitting the Rear Body and Wheel Arches
15:54 - Stage 96 - Attaching the Wheels and Adding the Bertone Logo
18:13 - Stage 97 - Adding the Battery Compartment and the Shield Emblem
20:21 - Stage 98 - Fitting the Tailpipes and Connecting the Electrics
22:32 - Stage 99 - Preparing the Windscreen
25:29 - Stage 100 - Attaching the Front Body, The Side Skirts, The Number Plate and Adding Details
Subscribe to World of Wayne at bit.ly/307c9rj
You can now support the channel and see behind the scenes videos on my Patreon at
/ worldofwayne
----------------------------------------------------------------------------------------
Video Game Soldiers by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: www.twinmusicom.org/song/295/v...
Artist: www.twinmusicom.org
#lamborghini #miura #agoramodels

Хобби

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@WorldofWayneUK Год назад

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

@rflester53 Год назад

Can't believe this build is done already! Seems like you just started it a few months ago. Great job Wayne!

@rogerredford6242 8 месяцев назад

I think your videos are tops. The Miura has always been one of my favorite cars and the detail on this kit is amazing. For a kit that expensive and large I would expect the body panels to fit a bit tighter. That was bit of a letdown.

@barrywhitlock141 Год назад

An Iconic Lambo. great looking motor. The gaps in the bonnet and boot where they meet the main body look a bit bigger than they should be, but apart from that it is a lovely car

@neilhaas Год назад

I like this completed model car very nice yellow. ❤😊👍🤗☺️🇮🇹🇮🇹🇮🇹

@mikehipperson Год назад

Still the best looking Lamborghini ever in my opinion and the very first "super car"!

@robertriley1327 Год назад

You should do a show and have all your cars that you are built on there and show them all off. Just a suggestion.

@jeanlaverdure227 8 месяцев назад

Thanks Wayne, wish I had thought of that. Going through my box of extra parts' from other builds, I came across 2 washers made of rubber/soft plastic which improved the fit immensely. Thanks again

@Cin0s3 Год назад

Congrats on finishing another one Wayne, looks awesome! Feels like you just started this a couple months ago.

@milanondrak5564 Год назад

Awesome looking car. Just enough of that Lamborghini ridiculousness and lunacy to make it look great.

@gregcarter9680 Год назад

"Well I can't see any reason to not screw this in" *Car explodes*

@WorldofWayneUK Год назад

😂😂😂

@mikeking2539 Год назад

😮 that was a quick build..... Aren't the gaps between the bonet and the front of the car rather big. And the same thing with the back engine bonet/boot part.

@WorldofWayneUK Год назад

There’s no gap at the front. Small gap at the back. Remember when I filmed the beauty shots I had to have them partially opened to be able to lift them up. If you look at the last picture and thumbnail you will see how they look when they are closed

@isfj1009 Год назад

Beautiful. Beautiful! Well done!!

@billgriffiths1685 Год назад

Great model, I think the Headlights and surrounds need better alignment.

@jasonsR2D2 Год назад

Very cool model. Exciting to see how everything came together at the end.

@stevenwheaton874 Год назад

It looks really fantastic! What a gorgeous model. Well done, Wayne. Thanks for sharing this experience.

@2005portensie Год назад

Those huge gaps between the door and hood/trunk sections and other fitment issues I noticed would absolutely drive me mad.

@tsyf 6 месяцев назад

impossible to fix, I hated this model.

@geraldogara5098 Год назад

Beautiful model 👍👍👍👌👌👌

@neilhaas Год назад

Very nice yellow model car Italian car this Lamborghini Miura. ❤😊👍🤗☺️🇮🇹🇮🇹🇮🇹🚗🚗🚗🚗

@enricoorsettopavan9892 Год назад

Lamborghini Miura Wonderful

@swpowell1226 Год назад

Excellent !!!!

@josephunderwood1228 Год назад

I had a thought for a build up. Bubo the owl from Clash of the Titans. That could be fun

@WorldofWayneUK Год назад

Definitely

@davidbassett4577 Год назад

It’s a gorgeous model .. love that yellow ! Sadly out of my price range🥹☹️☹️

@anfieldroadlayoutintheloft5204 Год назад

good vid build nice build thanks lee

@aynurschwan6462 Год назад

Respect!!!!!!

@Loulovesspeed Год назад

Another nice looking Agora 1:8 model car and your typical, clearly done assembly. I do have a concern with the somewhat poor fit of the body with the engine cover. The interior looks to be very well made. I understand your personal preference on the name badges at the rear of the car, but for the viewing benefit of your audience, I feel they should see the completed model as it was intended to be (and, as is done on the real car). *Then you can just peel them off if you'd like. 😃

@derrellreynolds6226 Год назад

I love it. ❤️ 👍

@schiltz371 11 месяцев назад

for $1600.00 id expect better fitment than a cheap 1/20th scale medal car kit costing $30 usd. the huge gap between the front section and engine bay are pretty noticeable. are those hinges adjustable? the dashboard and center console have a large gap as well. the speaker sounds like it was taken off a kids toy.

@johnnyzee383 6 месяцев назад

One of my absolute fav cars, and congrats on the build, but I am not liking how the rear fits onto the main section of the car. It looks like its not completely closed..also the trunk doesnt fir very well...For the price of this model I would expect the end result to have better fitment.

@enricoorsettopavan9892 Год назад

That's Amazing 🫶💪💪💪 Manu Thanks ⭐⭐⭐⭐⭐

@bobbybates2614 Год назад

Hi wayne that is one great model I got in touch with fanhome they told me there is still no date for the ecto 1 release

@tacfoley4443 Год назад

A truly beautiful model of an iconic and legendary masterpiece. All you need to do now is to take it over to Iain Tyrell's workshop [also on RU-vid] to show him and the team! They are totally rebuilding this exact car! I'm sure they would be interested to see it. Not far from you either. He is based near the huge Airbus wings factory in Broughton, near Chester. Give him a call!

@restobeetle Год назад

This is correct. It is a barn find from my neighborhood in black forest Germany!

@WondersChannel Год назад

It is really nice but I wish they would do a more modern Lambo. Same with a Ferrari! Some absolutely stunning recent Ferraris that I wish I could build.

@lorenzomodellismo Год назад

Perché non fa il Ferrari Transporter della centauria da 1040uscite

@jeanlaverdure227 8 месяцев назад

Hi there, getting to the end of my build and your videos are always helpful. I posted a note on the forum but did not get an answer except another member who had the same problem. The front wheels are wobbly despite tightening the screws as much as I can. Any suggestions? Wayne yours look solid!

@WorldofWayneUK 8 месяцев назад

Try getting m1 / m2 washers and putting a washer in there

@robbinatherly7988 Год назад

I noticed you only showed the engine revving and the interior dome and taillights working - do the other features not work? That stalk switch with horn and signal switch not work?

@WorldofWayneUK Год назад

I forgot about that. I don’t remember a signal switch in this vehicle you push the signal switch for horn and press it towards the chair to turn on the lights

@rickgregory9616 Год назад

Very nice looking car, but those gaps between with the hood and truck sections as they meet to the door; I'm surprised your OCD is not driving you nuts! 😅I know it would send me into orbit.

@WorldofWayneUK Год назад

I’m confused what everyone is looking at. It’s not that bad. The back section has a gap but the front is pretty flush. I suspect I hadn’t closed it fully on the video. The thumbnail shows it off much better

@rickgregory9616 Год назад

@@WorldofWayneUK I sent you an email with some photos of what I think the comments are referring to

@tomkemp9465 Год назад

Looks great. Do the headlights pop up?

@WorldofWayneUK Год назад

No they are fixed

@dominicpizzey1515 Год назад

Can't tell if the model wasn't assembled properly or that there's something wrong with the kit, as the engine cover and bonnet both didn't look like they sat properly.

@WorldofWayneUK Год назад

They are fine. I had them opened. If you look at the thumbnail you will see them in place. There is a bit of a gap on the back section but it aligns fine on top so not sure about that

@sasha85ful 11 месяцев назад

Where are logos (Lamborghini and Miura S at end stage 100)? From Stage 1 - stickers.

@WorldofWayneUK 11 месяцев назад

I didn’t like them so left them off

@user-px6ds7be8p Год назад

Another question. I had a lot of trouble fitting the front chassis on to the center section and had to try to fit it by taking the spare tire out. That didn't help - so I put the tire back in and eventually wrestled the front section on to the center section. The questioin - in some earlier steps I see you had the spare tire in place but in the later steps - when putting the hood in place, the spare tire is missing. Why is it missing and did you have to take the car apart to put the spare tire back in?

@WorldofWayneUK Год назад

No I actually only installed 1 screw in the spare tyre spindle. That way I could easily take it out and back in as it swivels around. It was easier to for the front end without the tyre in and then replace once it’s in place

@eddywells5689 Год назад

Wow another done well done 👍👍👍🍺🍺🍺🍺💞💞💞🇦🇺🇦🇺💪💪

@BradyPhotgraphy Месяц назад

The headlights are all wrong and not fitting correctly , is this something you did? I was planning on ordering this model but now I'm having second thoughts!

@WorldofWayneUK Месяц назад

What's wrong with them?

@robertepton3099 Год назад

Wayne, I have been trying to get the R2D2 you made, I filled out app for it , but it said it was from the uk. I filled out app for the US and they said they had different email, I checked both and the email is right. Is there anyway you might be able to help? Thank you

@WorldofWayneUK Год назад

I would contact Fanhome. They should be able to Sort it for you

@stevenjohnson1117 Год назад

hi wayne great build but that rear number plate is far to big the model the real cars number plate was a lot smaller

@Jeffrey_Haggard84 Год назад

Hey @worldofwayne are you planning on doing the fanhome enterprise D build I know you started it wasn’t sure if you were considering doing it again

@WorldofWayneUK Год назад

No I’m not going to be doing that while I am building the refit

@Jeffrey_Haggard84 Год назад

@@WorldofWayneUK when your done with the refit are you planing on it then?

@WorldofWayneUK Год назад

@@Jeffrey_Haggard84 I may do. I want to see how others fair with the model and how it looks at the end

@Jeffrey_Haggard84 Год назад

@@WorldofWayneUK i understand I went to look for your old videos and there gone was why I was asking lol.

@josephstanley5138 Год назад

Hey Wayne u have any plans on building the Fanhome Infinity Gauntlet

@WorldofWayneUK Год назад

Yep. Next couple of weeks hopefully

@josephstanley5138 Год назад

@@WorldofWayneUK Did Altaya release it for the French market

@WorldofWayneUK Год назад

@@josephstanley5138 I have no idea. They may have

@allanfiedler9645 Год назад

@worldofwayne question.. I know several people who are having an issue with the front hood. It seems like it hits on something that won't allow it to close properly unless you keep pressure on it. Watching your video initially your hood looks the same as mine.. you can later see you removed the spare tire.. then at the end it looks like your hood lines up well and your spare is reinstalled. . Any tips be greatly appreciated as this is driving me crazy.

@WorldofWayneUK Год назад

I removed the tire to see if that was the hat was stopping it go down. Turns out it wasn’t that it was the black frame under the bonnet it needs to be really tightly screwed in to the underside of the bonnet. Once that’s done it should go down fine

@allanfiedler9645 Год назад

@@WorldofWayneUK thank you! I will try that tonight!

@allanfiedler9645 Год назад

@@WorldofWayneUK Thank you! Turns out on mine its the fuel pipe... pulled it out and perfect... Need to figure out how to adjust it.

@pattersonmichael Год назад

@@allanfiedler9645 Yes same, pulled out the fuel pipe and front hood gap is 95% gone. I'm just going to leave mine out.

@user-px6ds7be8p Год назад

I've had trouble with the doors staying closed. The hinges are tight and the door latches aren't strong enough to keep the doors closed - they keep springing open. Any suggestions besides taking the doors off and stretching/bending the hinges?

@WorldofWayneUK Год назад

I didn’t have an issue with the doors. The just have a gap near the back

@sasha85ful Год назад

Yes. I have same problem. Without door hinge, door and cabin perfect together. But the hinge is problem.

@felimmahony Год назад

Great build but those eyelashes pity you can't leave out I think the car would look miles better other than that great so onto the next one Wayne 😀

@TheRajputsHistory Год назад

🌹🌹🎉

@richardjohn2734 Год назад

Just started watching your video and couldn’t help noticing what looks like rust/oxidation on the trailing edge of the rear section as you were attaching the number plate lamps?

@WorldofWayneUK Год назад

Close it’s actually flocking from the Gremlin build lol. It’s in the plastic box I was storing it in

@richardjohn2734 Год назад

Continuing watching and I see that you’ve either swapped out the rear section and boot lid for a cleaner version or applied some t-cut as some marks remain visible. Never seen this on a 1:8 kit before, and is unusual on what should be recently manufactured parts.

@WorldofWayneUK Год назад

@@richardjohn2734 no I just wiped off the flock

@richardjohn2734 Год назад

Thanks for clarifying its flock as I was considering purchasing the entire kit once it became available.

@scholesysscaleschematics2445 Год назад

Shims….just like a real Lambo then.

@timharrison8144 Год назад

There’s something wrong with those headlights….

@keithmorton110 Год назад

Those eyelashes look horrible. The engine is nice though. Great series Wayne.

@WorldofWayneUK Год назад

Never a fan of the eye lashes

@user-px6ds7be8p 11 месяцев назад

I am extremely disappointed with this Miura model. None of the body panels fit well - with large gaps about the doors, boot and bonnet. The doors will not stay shut. And, most importantly, in this stage (12) the plastic skirts were warped so that they would not fit or stay in place. Even when forced into place they interfered with the movement of the doors such that the doors couldn't be used. I have asked Agora for replacement skirts but I do not hold much hope out that they will fit any better. Very disappointing model build, particularly to have the very last step in the year long process be such that the car can not be finished. I have made several Agora models - all went well - but this one was made with very poor tolerances for components.

@WorldofWayneUK 11 месяцев назад

Check out mymiurabuild.com/ . Todd address and rectifies some common issues

@user-px6ds7be8p 11 месяцев назад

@@WorldofWayneUK Thanks