Build the Polar Lights USS Enterprise Refit 1:350 Scale - Part 1

Подписаться 75 тыс.

Просмотров 19 тыс.

50% 1

Continuing my 2023 mission to build the Polar Lights Star Trek USS Enterprise Refit in 1:350 scale.
00:00 - Introduction
00:51 - Stage 1 - Fixing the A/B Deck
08:02 - Stage 2 - Making the Aftermarket Bridge
Other channels mentioned in this video
SPRUEVERSE : / @sprueverse
AZTEK DUMMY : / @aztekdummy
TREKWORKS : / @trekworks
Most products can be sourced Worldwide from :
www.culttvmanshop.com/
All my Amazon purchases can be found in my Amazon store at
www.linktr.ee/worldofwayne
Paragrafix Photo-Etch and A/B Deck Upgrades
greenstrawberry.cz/
1:350 scale figures can be found at :
www.partworkupgrades.com
The link to a 5 minutes reference video and all Enterprise screen grabs from TWOK can be found at :
drive.google.com/drive/folder...
Subscribe to World of Wayne at bit.ly/307c9rj
Support the channel and see the behind the scenes videos and blogs on my Patreon channel at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media, Amazon Store and Merchanside can be found at :
www.linktr.ee/worldofwayne
Video Game Soldiers by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: www.twinmusicom.org/song/295/v...
Artist: www.twinmusicom.org
#startrek #polarlights #enterprise

Хобби

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 117

@WorldofWayneUK Год назад

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

@colosseumbuilders4768 Год назад

Wayne, you are brave. This is the single worst engineered kit I have ever encountered. Just wait until you get to the rings around the edge of the saucer and the four-part engineering hull. I disagree with attempting to the shine lights from the bridge. The saucer top and bottom lights were done with dental mirrors. There is no way to have an accurate bridge that shines lights on to the saucer face.

@DrFeelGoodHelpDesk Год назад

Wayne starts the Polar Lights build....I'm in!

@TheMartyJD Год назад

"Drills are normally meant for nails." Love it. I usually use a hammer.

@RomanVolkov898 Год назад

Ура Star Trek вернулся Только теперь USS Enterprise NCC-1701 refit. Cheers Star Trek is back. Only now USS Enterprise NCC-1701 refit

@dominiksilberhorn7058 Год назад

Fantastic work, very very happy to see you build this, you make this great, this small things....awesome work 😀👌

@sprueVerse Год назад

Your up close finger pointing is flawless!!

@brienwhite4936 Год назад

Good work 👍😃 the secret is in the editing.

@garyrichards6079 Год назад

World of Wayne at the Dentist !!! that drill noise went right thru me :)

@WorldofWayneUK Год назад

😮

@mikeking2539 Год назад

The photo etch seats are just nuts 😳 never seen anything so tiny.

@colonelklink53 Год назад

Nice video. I haven't built a model kit in decades and have just started again with the 1:650 TOS Enterprise that I got for Christmas a year ago. I've learned a lot, like how to airbrush and glue, putty and sand properly from RU-vidrs like yourself. I hope to learn from this and a few other kits before eventually giving the 1:350 refit a go. Thanks again for sharing your knowledge and skill!

@neilhaas Год назад

Hello Wayne, that's so cool amazing this starship USS Enterprise refit I like this ship. I have a model of this starship & USS Reliant too. Besides I have the star wars Jedi Star fighter. ❤️💘👍🤗😁😀

@aztekdummy Год назад

you can tell that GS bridge is not for "the Motion Picture" bridge. in the motion Picture, Spock's station was directly behind the Captain (between the the two turbolifts) after that it was moved to the left of the left turbolift.

@WorldofWayneUK Год назад

Spocks going where I put him lol 😂

@isfj1009 Год назад

This is going to be an interesting build to watch. :)

@Zammpie Год назад

Did i already said your crazy?!? :-) KUTGW!!

@stevenwheaton874 Год назад

Wow! I love your patience with this. I l really enjoy watching you build these models, Wayne. This is going to look fantastic when you are finished. Can't wait for your next Enterprise refit video. See you next time.

@tachi98lep Год назад

Great video of the 1:350 Enterprise refit! You are good at step-by-step explanations of the build.

@NerdPanic Год назад

Woot-woot! This is so exciting! I can't wait to start building myself :)

@trmblingblustar Год назад

Nice! I've been working on this for the past 2 years! Yes. Every time I get the sides installed on the saucer, I get annoyed because it's not perfect and start over! Maybe with these videos I'll try and make some progress!

@eddywells5689 Год назад

Great vid 👍👍💪💪🙏🙏💞💞🍺🍺🇦🇺🇦🇺🐕🐕

@johnbradley4671 Год назад

Hi Wayne. If you are going to be using photo etch in the future with tiny pieces again use a wax pencil to pick up the bits. will make it easier.

@rickgregory9616 Год назад

Exactly what I was going to suggest! 👍 Used them and they work great!

@MartinFutter70 Год назад

Nice work so far, you've just reminded me I have a dentist appointment coming up with all that grinding! Green Strawberry? Isn't that Lou's favourite model company!!!!? Looking forward to more

@James-rn7dx Год назад

Looks great, love the bridge. It looks like you have the Star trek 2 bridge with the science station off to the side in which case the chairs should be all white in color.

@briancuthbert6160 Год назад

I am one of those who have this kit in my stash, and occasionally bring it out to look at, then put it back in the box! If I build it it will be out of the box - no lighting! I am looking forward to your build. I am also watching Phil's build on Sprueverse, and I have dug through Lou's channel and seen his videos too. I have subscribed today so I won't miss anything. I was also going to mention the wax pencil for small parts, as others have already done. P.S. I love the Thursday livestream too.

@richardschindler8822 Год назад

My eyes hurt just looking at those tiny parts. Very interesting build

@jfrFK28ST01fan Год назад

Great work so far! I have watched Boyd’s (aka TrekWorks), series of videos on the 1:350 Enterprise Refit from years ago. It was amazing work. Can’t wait until video number 3 (aka Part 2).

@PitstainHobbies Год назад

Great video and looking forward to seeing your experiences building this intimidating model Wayne, also very nice to see someone using the Green Strawberry bridge, I think you are the first I have seen using one for a build. Keep up the good work!!

@modeltankguy Год назад

good show mate keep them coming

@jeremylemings Год назад

My heart about stopped when I saw that top airlock piece bend. So glad it didn't break on you.

@WorldofWayneUK Год назад

Yep. I managed to flatten it out and once primed it’s not noticeable . You live and learn lol

@alanvarrechia6338 Год назад

Hi Wayne. Im just making a piececool The Queen Anne's Revenge. It's all photo etch, at the end I will either be really good with photo etch or insane. One thing I have is a wax pencil, they are ideal for picking up photo etch, in fact I don't know how I managed to do without one. I can highly recommend one you won't regret it. Keep up the good work.

@MikhailBorg Год назад

I am SO glad you are doing this series. I also have a 1:350 refit Enterprise I'll be building soon, and I'm a bit intimidated by it. Seeing you work your way through each part, including aftermarket parts I'm thinking of getting, is going a long way to reducing my anxiety!

@gb1701 Год назад

Just received my kit and are mentally preparing myself for many months of tackling the project. The thing is huge! While I also wanted to have a visible bridge for mine, but after seeing how tiny & difficult it will be to work with the photoetch version (I am not an advanced modeler by any stretch), I decided when the time comes, to get mine from Shapeways. It will cost a little more, but it comes fully assembled (the seats already installed) and will just need to be painted and think that is a better option for someone with less experience and the proper tools. I also like the fact they have the option of TMP, TWOK, TFF and TUC versions, while with the photoetch one is stuck with TWOK. Personally, I've always liked the TMP version best, where the science station is aft.

@majorpain9016 Год назад

Looking forward to watching this build. This is my favorite version of the Enterprise and kinda went a little over board. got the masks for the 5 color paint, movie grade lighting kit and, photoetch parts. Amazing how fast it starts to adds up. still need to get the pearls yet.

@steve1315 Год назад

Always good work dude.

@micdeole-2099 Год назад

Great video Wayne! The 1:350 Refit is my favorite ship so I can't wait to see how the build goes. I one day too shall tackle the beast and these videos are just pricelss.

@milanondrak5564 Год назад

A good reliable light block method I use is to undercoat the inside of the parts black then spray them silver to allow the light to reflect for a more even light fill.

@WorldofWayneUK Год назад

Yep. Doing the same although my inside is white on top of the black

@williamd1732 Год назад

Hi Wayne, sorry I'm late with this. Things have been hectic around here. I'm still trying to get my house sorted out. I'm old and slow. Hope you're both doing well. I'll be enjoying every one of these "episodes" for this build for sure. It's quite the challenge this kit is. I'm so looking forward to the time I can start these kits. I'll be building two of them. I've got a "twist" of an idea for the second version of it. Loving the detail you'll put into this.

@WorldofWayneUK Год назад

Wait to you see vid 2. That’s on the channel Friday. Hope you are keeping well Will. Love to Victoria

@babyfacedassasin4418 Год назад

Reminds me of an old cartoon flea circus.

@terryschwandt8116 Год назад

Just to make things a little easier with your dress pin and superglue, instead of cutting the pin when gunked up, get a cigarette lighter and put the glued end in the fire. It will all burn away, then just wipe the end off. Good as new.

@blackknight5690 Год назад

Hi Wayne das ist eine sehr große Enterprise ich kenne nur die von Revell. Und ich muss sagen die Brücke die du dazu gekauft hast macht die Enterprise noch viel orginaler ich schau dir gerne zu und freu mich auf viele weitere videos.

@ListerDavid Год назад

Looking good sir. I got the 14” eagle transporter from Space:1999 for Christmas which I’ve just made a start on.

@davidjames1389 Год назад

Great work so far! Although honestly not sure how I feel about having that bright searchlight in front. I know everyone does it that way but it always looks way too intense to me compared to what's on screen.

@mbignell1 Год назад

The Raytheon lighting technique works well for that effect, if you've got the talent to pull it off.

@swpowell1226 Год назад

Looking good. !!! Can't wait to see it finished. Suggestion: You should use your sand stick to take the nubs off the photoetch parts. You can see them.

@WorldofWayneUK Год назад

Yep. I actually got them when I filled the edges. Impossible to do perfectly on the seats. They are on 2mm and very brittle

@swpowell1226 Год назад

@@WorldofWayneUK I figured you probably would see it. Sorry my OCD is weird. LOL

@Cin0s3 Год назад

Hard working with small photo etch pieces like that. What I usually do with small pieces like that is I will wet a toothpick with a little Pledge floor polish (or Future floor polish) and its just enough tack to pick the piece up and set it into place where the glue bond is strong enough to overcome the polish bond.

@WorldofWayneUK Год назад

Great idea

@georgemacgregor5437 Год назад

Hey Wayne, Great video. I am Looking forward to when you get up to the Arduino. I want to see how you program the lighting effects.

@viswanathanpather6849 Год назад

This build is going to be awesome. Just a few useless facts . I noticed from the last videos description that you have references from TWOK. It does appear that on the greenstrawberry bridge, Spocks Station is on the side as it is in TWOK . In the TMP , Spock Station is more Aft. ( might be wrong. If so I stand corrected) . The same bridge for TWOK is used in TSFS. So bottom line is if you have the right bridge ( I think) . One thing though. I hope you not thinking I am nitpicking but you might want to pick up a glass slab or smooth tile to cut photoetch. If you using a cutting mat it can cause the photoetch to bend . It can then be difficult to bend back . That said I enjoyed both the videos on this build so far . Looking very much forward to the next.

@WorldofWayneUK Год назад

Yer all the figures I’m painting are in TWOK regalia

@dashriptide Год назад

I have a lot of issues with trying to glue things small I either get my fat fingers on it and or my tweezers. No matter how little I put on. I got a lot of models plastic to do. Still want to do my jaws diorama that got put aside till I can get my resin and building up. Along with other models. But this is looking good Wayne I’ll let you professionals. Do these I’m just not that good yet

@chrisgwilliam9893 Год назад

👍🏻

@SimonPeter611 Год назад

I own 2 of these and in the middle of one build but it's a kind of frustrating build trying to fit it all together. Don't get me wrong I don't mind getting after market parts and spending some money but this kit on the lower hull doesn't fit right together so I've been doing the Agora Bismarck instead. Great seeing you take this on. You'll do great 👍

@demacianwarrior6502 Год назад

Fascinating.

@Dexadrinne Год назад

Goodluck Wayne. I have the same kit did the saucer section, and there i stopped and it has rested for almost a decade LOL

@pherretlord Год назад

At some point, when you're feeling particularly masochistic may I suggest that you try Mobius's USS Discovery from "2001: A space odyssey". It's taken from the actual blueprints that were drawn up for the movie and is 100% Accurate (There are some photo etch kits to push it even farther though.) It's around 5ft (1.52M) if I remember correctly. You will need a metal rod in it to support though. Looks absolutely stunning when done though.

@WorldofWayneUK Год назад

I have the Aries 1B here to do first but that’s on my radar

@ThiloAdamitz Год назад

You've actually made the already over-sized windows even bigger....

@WorldofWayneUK Год назад

When the windows go in I will seal them in so it will look uniform

@mb2000 Год назад

I would not want to be your optician after this!

@johntreloar8203 Год назад

Wayne, you need to purchase either a wax pencil or PE applicator, it will make adding PE parts easier.

@WorldofWayneUK Год назад

Definitely

@timwhalan6417 Год назад

👏🍺👍🏻

@davidoflanagan Год назад

Morning Wayne. I would say if you are grinding or cutting resin parts, then I would recommend a mask to be used. The resin dust can be nasty if inhaled. Also i was going to mention if you are thinking of sanding down the phaser banks so they don't cast a shadow with your registry light. you can use resin later on to put the 2 little bumps back in. Keep up the amazing work

@WorldofWayneUK Год назад

Yep. I already started that. You will see that on the next video

@bobbybates2614 Год назад

Hi God in touch with fanholm to enquire about the ecto 1 at the moment there is no news

@smsno1 Год назад

Look at that x-wing! Captain cardboard?

@edwardbellamy5154 Год назад

when you said just like that did you have your tommy cooper hat on

@WorldofWayneUK Год назад

😆😂😂

@rrhine Год назад

Looking good so far, but a mild criticism about the Green Strawberry product. The resin is fine with nice details and the photoetch works great, but the decals will fight back hard. My experience with them was them lifting off no problem, then immediately curling up and not adhering in any way. I've ended up scanning them and reprinting them on my printer. Hopefully yours work better but maybe you have a better set or solutions.

@WorldofWayneUK Год назад

I ended up painting the bridge as too many decals disintegrated

@rrhine Год назад

@@WorldofWayneUK Well, wow I guess. Hopefully the quality control improves a bit there because the decals themselves deserve it.

@davidgriffiths4844 Год назад

Polar Lights 1/350th scale FLEA CIRCUS!!😂

@WorldofWayneUK Год назад

That exactly how Mrs World of Wayne described it lol

@rufio1013 Год назад

That piece is not the A/B deck, it’s just the A deck or bridge. The protrusion on the saucer is the B/C deck

@tumbleweed1970able Год назад

boy you need to invest in an airbrush , much cheaper than spray cans in the long run, but a great build

@WorldofWayneUK Год назад

I have an airbrush but I hate putting primers through them

@tumbleweed1970able Год назад

@@WorldofWayneUK I used to be the reverse I started with just primers and it took a long while for me to be brave enough to use it on main coats and details but now after plenty of errors I'm ok

@bedfordshiremodeller4491 10 месяцев назад

@@WorldofWayneUKHe,s right true airbrush does take ahelluva lot longer but it looks 10times more professional on the finished kit

@ohmydinosare Год назад

this looks like a fun one, I love the refit enterprise, I think it's the nicest looking ship in the star trek franchise, always loved that one. That bridge is insanely detailed, will it actually be visible when it's done? it looks to be completely enclosed.

@WorldofWayneUK Год назад

Yep. The roof Lifts off so you can look in

@philfy Год назад

Hi Wayne, hope you feel better soon 🙂 Just wondering all these models that you do like the xwing, Valentino Rossi bike the tumbler and Ford gt 40 we don't get any of these in Australia, do you know if we can get them here, I can't even subscribe to them because they don't send them here, the only one is Agora, anyway thanks Phil

@WorldofWayneUK Год назад

Not atm. I think Ahora models has the solution for models going to Australia atm . There used to be a lot more but with the winding up Of Bassett Publishing it has been hard

@DronemanJoeRc Год назад

Hey bud got another question the uograde bridge i can use the 1701a on this model also? Reason is the 1701 refit is out of stock everywhere and i dont really see any size diff just the interior and im not going to fuse over that i just to get one now so if that works let me know asap and i will get it. Thanks again i will wait for your answer.

@WorldofWayneUK Год назад

Yes

@DronemanJoeRc Год назад

@@WorldofWayneUK fantastic thanks

@mikes5637 Год назад

Anyone have any news about the Eaglemoss Enterprise D? I had an email from a company saying they were taking over then nothing. That was months ago.

@WorldofWayneUK Год назад

I expect the launch announcement detailed yesterday was for IXO as that is live now. The Fanhome one I suspect is not ready atm and we may be having to wait a little longer for that. Only time will tell. Don’t worry about login details. You won’t need it when it goes live.

@jamieotoole6828 Год назад

Will you see all this detail once the ship is built?

@WorldofWayneUK Год назад

Yep

@jamieotoole6828 Год назад

@@WorldofWayneUK nice can't wait too see more progress keep up the good work

@DronemanJoeRc Год назад

Thank you Wayne im Joe, im waiting to get my model in a few days. I will be watching your vids very closely bc you really give detailed info and yes its going to be one hell of a project, but from what i see its going to look awesome once its complete. Dropped you a sub my friend.👍👍👍👍👍also any recommendations id appreciate it

@WorldofWayneUK Год назад

Just putting on the saucer walls today. That’s a challenge I can tell you

@DronemanJoeRc Год назад

@@WorldofWayneUK i will watch onces posted. Im watching your part 2 now also heard in the very first vid about a paint guide thats available? Thanks again