I am in the process of making some cast cement parts and bubbles are a total bummer, brah! To get rid of the bubbles I built 2 vibration tables. The first table turned out to be too small for my needs… the second table was just right. I demo both tables and talk about what might be perfect for your project. The cost of each build was between $50 and $100 depending on what you have on hand. The premium DIY vibration dampening rubber feet are a little pricey ($30 for the rubber) but those can be replaced with springs if you want.
FYI when working with concrete or any dust producing materials you should be wearing gloves and a mask. Safety first!
If you have any questions or comments, do let me know in the comments. I will help when I can.
Shopping List: Buying from this link helps support the channel!
Rubber for vibration dampening feet
Smoothon Ecoflex 00-30 - amzn.to/3Gkt4dX
Motor for Large table (I got mine on sale for $35)
amzn.to/3r6wlJs
Nylon Lock Washers are recommended
Insert (rivet) Nuts used on Small table 3D printed housing
www.mcmaster.c...
3D Prints Links:
Mold for Rubber Feet
www.thingivers...
BUY the 3D printed mold from here if you don't have a 3D printer:
www.etsy.com/l...
3D printed Housing (Uses 3” deck screws for attachment)
www.thingivers...
I'm now on Patreon!!! The reward levels are very basic for the time being but I promise to bring merch and other perks in the near future.
/ the3dhandyman
27 сен 2024