Build This Quality Freestyle FPV Drone For $150 !!! 2024 Edition

Подписаться 19 тыс.

Просмотров 33 тыс.

50% 1

Let me know if you are interested in a setup video for this quadcopter!
▶️▶️All The Parts I Used:
▶️Frame:
✔️www.myfpvstore.com/quadcopter...
▶️Stack:
✔️www.getfpv.com/axisflying-arg...
▶️Motors:
✔️www.getfpv.com/dys-samguk-ser...
▶️VTX:
✔️www.myfpvstore.com/fpv-electr...
▶️ELRS Receiver:
✔️www.myfpvstore.com/fpv-electr...
▶️Camera:
✔️www.myfpvstore.com/fpv-equipm...
▶️3D Prints:
✔️www.thingiverse.com/search?q=...
▶️Upgrade To Digital:
✔️www.myfpvstore.com/fpv-electr...
▶️Better Budget Motors:
✔️www.myfpvstore.com/ip27
▶️Better ELRS Receiver:
✔️www.myfpvstore.com/fpv-electr...
▶️Awesome Stack For The Price:
✔️www.myfpvstore.com/fpv-electr...
Feel free to upgrade where it matters most to you!
⏰Time Stamps⏰
0:00 Introduction
1:47 Parts Overview
5:10 Build & Prepare Frame
7:15 Stack Prep & Connect
7:39 VTX Prep
8:11 Capacitor Connect
9:28 XT60 Lead Connect
9:52 VTX Mounting
10:41 Motor Mounting
12:48 Motor Connect
14:24 Flight Controller Mounting
14:43 Receiver Mounting
14:54 Camera Unboxing
15:09 Camera Connect
15:20 VTX Wiring
16:28 Antenna Connect
16:41 ELRS Wiring
17:10 First Power Up
17:46 Outro
▶️How To ExpressLRS:
✔️ • Finally! Quick Set Up ...
▶️▶️DemiBot Build:
✔️✔️ • ALL Aluminum!! 😱 FPV F...
▶️▶️SpeedyBee Stack Video:
✔️✔️ • What If One Stack Coul...
▶️How To Bind ELRS Micro Drones:
✔️ • How To Bind Any & ALL ...
▶️The One & Only Moxy Build:
✔️ • Let's Build The All Ne...
▶️Let's Build A Master Drone:
✔️ • Let's Build a Master D...
▶️My Review of The Speedybee V3 Stack:
✔️ • All New SpeedyBee V3 S...
▶️Aikon F7 AIO 60 AMP:
✔️usa.banggood.com/custlink/KmD...
▶️Everything To Know About LED's:
✔️ • Betaflight LED's !! Ev...
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
▶️If you don't want to build one, Buy One!
✔️amzn.to/37s0SdE
✔️usa.banggood.com/custlink/DmG...
====▶️My Scope:
✔️amzn.to/2Y7NUtc
====▶️Cheap Version:
✔️amzn.to/2PC8Ogj
✔️usa.banggood.com/custlink/33K...
====▶️Camera For My Scope:
✔️amzn.to/3SA2ANg
====▶️LED For My Scope:
✔️amzn.to/3ZiVsXC
====▶️Lens For My Scope:
✔️amzn.to/3kxPQKs
▶️My Soldering Iron:
✔️amzn.to/2Oj95XS
▶️Cheap One
✔️usa.banggood.com/custlink/mDG...
▶️Micro Pencil Soldering Tip
✔️amzn.to/3Fq1dKm
▶️MyFPV Slidez:
✔️www.myfpvstore.com/i09w
▶️Blue Loctite:
✔️amzn.to/3fB0lqL
▶️When A Motor Rips Off:
✔️ • What Would You Do If T...
▶️How To Set Up LED's
✔️ • Betaflight LED's !! Ev...
▶️Smoke Stoppers:
✔️amzn.to/3tsWhhq
✔️amzn.to/2YL7trB
✔️amzn.to/3tsMt77
✔️www.myfpvstore.com/8bf3
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
/ drainmanfpv
/ drainmanfpv
▶️If you want to learn about LED's:
✔️ • Betaflight LED's !! Ev...
▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2-Day Shipping)
✔️amzn.to/2PjqUDi
or
✔️www.myfpvstore.com/7ts8
▶️How To Taranis:
✔️ • How To Frsky Taranis
▶️My Electronic Screwdriver:
✔️ • ES121 Electric Screw D...
▶️1.5mm Driver:
✔️amzn.to/3txYarX
▶️Hobbywing:
✔️www.myfpvstore.com/lufc
or
✔️amzn.to/31e6jFM
▶️Loctite:
✔️amzn.to/39QY5HE
▶️Screw Pack:
✔️amzn.to/2BPzBSq
====▶️Flight Controllers:
✔️www.myfpvstore.com/940s
====▶️ Quadcopter Frames:
✔️www.myfpvstore.com/quadcopter...
====▶️ The Goggles I use:
✔️amzn.to/3sQ5ksu (Comes w/ 2 Modules)
✔️Analog - www.myfpvstore.com/5ff6
====▶️My Radio:
✔️amzn.to/3sU9Fem
✔️Non-DJI: amzn.to/39dqI3c
✔️HD - amzn.to/2AVAEQo
====▶️ Video Module That I use (When Using Analog):
✔️ www.myfpvstore.com/s1mh
====▶️Bench Power Supply:
✔️amzn.to/3cpIOhE
====▶️My Camera Used:
✔️amzn.to/2wX0eCg
====▶️My Cam Mic:
✔️amzn.to/3b2ZoUZ
====▶️Contact Me: @DrainManFPV on FB or DrainManFPV@gmail.com
====▶️I'Gizzle: / drainmanfpv
====▶️ / drainmanfpv
#fpvdrone #budget #freestyle #drone

Опубликовано:

16 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@BOTGRINDER 6 месяцев назад

love a good budget build.

@Chillin-fpv 6 месяцев назад

One of my buddies printed me some arm motors protector/ feet things with a steel ball bearing in the center so it will slide really smooth on anything you touch down on. Its pretty sweet

@C0RT1Z 6 месяцев назад

Any chance you or your buddy have the stl for em? Would be killer if I could print em for my new SourceOne frame😬

@Chillin-fpv 6 месяцев назад

@C0RT1Z so I found it but every time a comment the url even when broken up with spaces it automatically gets deleted.

@Chillin-fpv 6 месяцев назад

Just Google 16 x 16 drone skid steel ball bearings

@Mr.Amazing-vx3li 2 месяца назад

Thats a really cool adaptation. Great idea

@marklitvin9291 6 месяцев назад

God bless you man! For every tutorial you make.

@ruebenfilmz 5 месяцев назад

Appreciated! Astute on point. As always, an immersive tutorial.

@dadpoolfpv 4 месяца назад

Sick build. Thanks for the parts list, my friend! Nice flight. Keep sending.

@RJFM4 4 месяца назад

Keep the information coming, well explained and not boring. Yes to BF video. Thanks

@Gray_Beard 6 месяцев назад

I have those motors and they have been great so far. They still run great and haven’t burnt out from crashing and bashing.

@24kJames 5 месяцев назад

Nice friggin work Drain Man. Quality video.

@Joey-Jdi 2 месяца назад

2024 build in December is wild

@Aperturex1337 3 месяца назад

This is so sick dude. Added everything to my cart and ordering tomorrow once payday hits! 😄

@FlyZoneFpv 6 месяцев назад

Sweet quad . Love red

@TomasWatchReviews 6 месяцев назад

that is surprisingly cheap. Here in Europe it would be a struggle to find a decent half alive used 5' drone for that price. In my story I just got lucky, 200eur I got full racing 6s drone with 2 extra frames, 5 batteries, charger, a bucket of props, hand-full of spare arms, extra 5 motors, screws, etc etc.. So from my experience I would say that buying somebody's "cleanup bundle" is always the best from financial side. Some are upgrading to HD and just getting rid of all analog.. Good times for those who are fine with analog :) Got eachine ev800d 60eur and betafpv literadio 2 elrs 40eur :D So 300eur full setup with bunch of extra parts. Oh, and GoPro session 5 100usd, so 400. Full summer of beating, only broken one arm :D

@quintangrass5259 2 месяца назад

Outro was awesome

@DRONEPOISON 6 месяцев назад

Great video brother

@mericanoutlaw6507 2 месяца назад

Dig it man. Just got back into fpv after 5 years off.

@RickJamesFPV 6 месяцев назад

What's up Drainman? Keep it going Brother.🤙🏾

@merodack3721 2 месяца назад

this is awesome

@FatStacksArt 3 месяца назад

I love things that fly so drones were one of my favorite toys since I was 8. I am now 13 and want to build a cheap drone because I am a kid and don't have that much money. I saw this video and was in love. Not only is it a drone it is an fpv drone so I am super happy to start building!!

@marktsarenko3943 Месяц назад

How’s it going? I built my drone at the same age as

@thman2180 6 месяцев назад

Could we possibly get a 3-4 inch 2024 build I'm not ready to commit to a 5 yet 😅

@aztecjoe29 5 месяцев назад

Awesome

@endxrz_ Месяц назад

love this tutorial, plan on building

@ZT3X 19 дней назад

did u build? - how did it go

@BallPingFpv 4 месяца назад

Bad ass i didn't think that would be possible in 2024 150$ bucks heck ya let's go!

@Smagsfpv 4 месяца назад

I wanna see you do a build video with the Vanny Pro 🤘

@Blankcock Месяц назад

the word budget got me

@AJsMami29 4 месяца назад

You're so awesome

@_________________404 Месяц назад

Thanks. Will be taping RPG rockets to one of these soon 👍

@Willy_Tepes Месяц назад

So will I, and I don't even live in Ukraine.

@YTFPV 4 месяца назад

Wow so simple i guess next step is your betaflight setting and ready to go really .What would you recommend to make it winter snow proof ?

@mgkbeats 2 месяца назад

Wat ru using to control it

@mathewrtaylor 6 месяцев назад

Great build! Could you do a cinewhoop (analog of course) for similarish amounts?

@jdetka 2 месяца назад

Thanks for sharing this budget build. This will be my first build in a long time. I'd like to set this up with my FrSky transmitter but I'm not sure what receiver I need to buy and how to connect if I want an analog setup. Any suggestions?

@Loki_FPV666 6 месяцев назад

I built a budget quad using that frame a few months ago and I think it's pretty decent for the money. Do yourself a favor and buy an extra one so you have all the parts you need to repair it, since it's only $30 for the whole frame. I haven't broken any arms yet but I have broke the top plate. I also used the same VTX and it works really well just make sure you secure your antenna really well. I had a crash where the antenna ripped off and broke the MMCX connector on the VTX. That stack looks pretty good for how much it is. On mine I used the Speedy Bee F4 50 amp stack.

@J2K-303 2 месяца назад

what about the goggles and remote or does it come with the other things?

@meffyfpv 6 месяцев назад

🔥 🔥

@Timpox Месяц назад

Hi can i ask will work your ELRS for tbs tango 2 pro

@FunnyBitsMedia 6 месяцев назад

hi :) just want to ask if you can pair the radiomaster tx16s with the DJI o3 air unit ?

@recap962 4 месяца назад

how far it can go

@user-im5hm2ty6d 5 месяцев назад

How well does this drone fly?

@jacojojo42 6 месяцев назад

do you have the myFPVstore in melbourne FL?

@willsintheair 6 месяцев назад

I had no idea you could still find those DYS Samguk motors. Pretty great motors for the price. You can literally order 6 (two spares) for the average price of 4 normally priced motors. The c-clip is annoying but at least there’s a spare in the box.

@Felx938 Месяц назад

What speed can you get with this build? Thinking about making it

@robortalien Месяц назад

Cant find googels in the description. What are some good cheap googles to use with this setup

@zackleeFL 11 дней назад

Is that Melbourne? I'm up in Titusville.

@user-cw9jm6vk6b 2 месяца назад

What's the flight range?How long does a battery last on that

@zaik04 3 месяца назад

Dude couple questions. Im just learning. Is there no antena? How do i decide props? And what material are you printing for your parts?

@gapsnapperfpv3947 3 месяца назад

Hurray NOT HD ! subscribed just for that fact ! So how clear is that VTX ? Better than TBS ?

@PennRCAdventuresOffical 2 месяца назад

Just wondering what kind of controller and goggles should I use if I build this for cheap?

@LehtusBphree2flyFPV 6 месяцев назад

I prefer flying 4s and 6s on the same Quad. 4s motors with a throttle limit of 66 on 6s. Flys great, and you're not left out flying 1 type of battery when you have more 4s than 6s.

@christianetorres350 Месяц назад

Hola Drainman, I just build a quad with the same stack. But I have a small problem, when I arm the quad is arming too high, it should be on idel. How can I fix it?

@user-ll1ed5ng1y 3 месяца назад

Ia the video at the end by a gopro or the camera he fixed can someone reply?

@NikG603FPV 6 месяцев назад

I would use a smoke stopper to test it first because I don’t trust my soldering. lol. Nice build though.

@perfectfire 24 дня назад

Hey, thanks for all of this. Some of the parts are out of stock, but I think I found the exact same ones at different shops or ones that are at least equivalent or even slightly better. I am a *complete* newbie and the one thing that is missing for me is: what propellers should I get? I assume the type of propellor is based on the weight of the aircraft, desired speed, desired efficiency and kv of the motors, but since I am new I have no idea what propellers would be good for this build. Also since I am new I assume I need an RC controller to control the drone and since it is an FPV drone I would need some video goggles or at least a video screen. What would be good options for those? Edit: I just realized there is no mention of batteries at all. What batteries should I get and where do I mount them. You mention a self-built power supply, but I assume that is just used on the bench in lieu of plugging in a charged battery, but still, I would like some info on what battery to get. Edit2: Also your parts list doesn't list the capacitor and I don't even know what it is for.

@rhettlee Месяц назад

Bruh you have so many damn quads 😂😂😂

@danielvasiliusus5658 6 месяцев назад

Hello,I have an TCMMRC UR26 Mermaid 220 drone but I don't have any 3d prints and I want some but I don't know which one fit my frame.Do you have any clue ?

@ghostrot 6 месяцев назад

How do you guys get these price i pay mee then 50 for the frame alone

@ChrisQuadFPV Месяц назад

I think you installed the vtx upsidedown. (Maybe)😮

@georgeaura 6 месяцев назад

What would be a good digital starter setup goggles and camera? Budget friendly

@DrainManFPV 6 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4OcQ9bhqRJA.htmlsi=3XCzPe1xPW75MLZy

@Toryh86 5 месяцев назад

I just broke one of my 5 inch and frame is put of stock so I bought a source one v5 last week to fly until my frame comes in stock....so much room in thr frame.

@robertnastasi4738 16 дней назад

I do like speedy bee but the customer service directly from speedybee sucks. F405 stack no black box, potential ESC problems one lit on fire but I cannot say it was there fault directly it lit up after 2 months and I own3 or more iflight ESC,s that were my daily fliers never a problem, and a TX800 that never worked, and I went back and for for a year. They never even read a complete e-mail and wanted me to start trouble shooting from step one over and over, I threw it in the garbage. I like what they are doing for the money and ordered a new f405 stack. Hope they worked out the problems.

@Willy_Tepes Месяц назад

Soft mounting was a troll. Drop it!