Build Video ; Fabrication of BMW E46 M50 Turbo Sedan Pro Drift Car , Rear Mount Radiator

Подписаться 4,5 тыс.

Просмотров 19 тыс.

50% 1

First Episode of our Build Series; here we explain in detail how driftcars and racecars are built! Rollcage, fabrication, engine building, suspension setup, wiring , custom work, painting, mapping, everything! All secrets revealed !
We supply Wisefab , Feal and many other brands worldwide , don’t hesitate to contact us on info@einzel.nl
Shop Styling Parts for Audi,BMW, Ford, Honda, Mazda, Mercedes, Subaru, Porsche & VW?
www.k2-industr...?sca_ref=3202641.z1LBYSR9KJ
Use Discount Code : DRIFTJESUS
Other Videos you don’t wanna miss :
E46 V8 Pro Drift Car
• E46 Drift Build Video ...
Odi Bakchis Formula Drift Nissan S15
• Odi Bakchis explains h...
E46 M62 Vortech Rear Mount Radiator
• Build Video : E46 V8 D...
Nissan S14 Pro Drift Car Build
• Drift S14 with NASCAR ...
Quick Change Diff Install Nissan S14
• Quick Change Different...
Formula Drift Corvette Setup At St Louis
• Behind the Scenes of F...
Worldwide parts :
www.einzel.nl
info@einzel.nl
Dealer for
Wisefab
Feal Suspension
NASCAR gearboxes
Quick Change Custom Differentials
Seems Legit Garage
Fuelab Fuel Systems

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@JRcrib 3 года назад

Love info like this, a lot of valuable stuff compacted into 15 minutes, thank you

@DriftJesus 3 года назад

Yeah , I'm always annoyed by videos which show 5 mins of unboxing and talking about talking. Wanna make sure we never do that!

@fuckngreat8955 3 года назад

7:02 the thing you did with the mesh on the trunk looks clean, way better than a massive hole in the rear window or trunk

@DriftJesus 3 года назад

Thanks! I'm very particular about air in- and outlets, makes or breaks the car visually.

@fuckngreat8955 3 года назад

@@DriftJesus very true

@mrsam5350 3 года назад

Excellent walkthrough, thanks. It's always good to see how knowledgeable drift guys setups work, helps us all in the Drift community 👍

@DriftJesus 3 года назад

Thank you! More to come

@fuckngreat8955 3 года назад

That e46 Looks so good, i prefer the pre facelift, but seeing this thing in all black with the widebody looks so damn good👍👍👍

@Peterdinh3 3 года назад

Love how informative this video was DJ thanks for uploading can't wait to see more!

@DriftJesus 3 года назад

Yep lots more of these coming! This is a back-up car, for some of the other cars that are more elaborate builds, we'll do 30min video's.

@TSMIGOS 3 года назад

This is pure beauty !

@SmilinBastard 3 года назад

Love the design of the rear mounted rad. Can’t stand the pick up truck cut window either!

@DriftJesus 3 года назад

Haha was afraid to offend people, and lot of guys build for functionality, but I just prefer the profile of the car to be nice. Drifting is a spectator sport and I'm old fashion haha!

@SmilinBastard 3 года назад

Couldn’t agree more

@haydenmidyette8918 3 года назад

Very nice love the 4 door build definitely gave me some ideas thanks alot for this

@DriftJesus 3 года назад

Main reasons I choose a 4 door ; easier for rear mount , and easier to replace doors than quarter panels. Also its a lot easier to find a solid sedan shell. Plus they are a little lighter than coupe.

@haydenmidyette8918 3 года назад

@@DriftJesus exactly haha im planning on doing something along these lines for my 325i and man I dig the custom headlights hella thanks for the reply I wasn't expecting it I definitely appreciate it man 🙏

@DriftJesus 3 года назад

@@haydenmidyette8918 oh yeah I try to reply to every message! If you take the time to write, I'll find the time to reply!

@haydenmidyette8918 3 года назад

@@DriftJesus thats whats up, man of respect fs 🙏

@sidewaycrew1271 3 года назад

That's a very Nice build, there a so much Nice Details... Like the Airliftjacks, or the removable Cooling-System-Housing... 🤩🔥🤙

@DriftJesus 3 года назад

Yep, had to be easy to remove and install! Otherwise its also impossible to fit radiator.

@sidewaycrew1271 3 года назад

@@DriftJesus this is Genius... If you're on Event, you loose not so much time... when Service is needed

@vandettabuilds6641 2 года назад

That is a beautiful car!!!

@DriftJesus 2 года назад

thanks!

@AlexAzul73 3 года назад

a beast of a car,good work indeed, nice video.

@DriftJesus 3 года назад

Thanks, car is very easy to handle!

@MaxHeidrich84 3 года назад

Nice build 👌🏽

@michaelhood2856 3 года назад

Einzel I'm loving your e46 content. You are budget where needed (tablet dash) and spend where it counts on good parts. What ecu are you using that works with the tablet?

@DriftJesus 3 года назад

I use an ECU Master. the tablet is just a backup for the real gauges, this way I can see what the ECU sees. All my cars always have needle gauges

@misterdan2230 3 года назад

Where can i find the overfenders 😍 car looks epic dude im very jealous.

@DriftJesus 3 года назад

Its custom made , as said in video we made it to match the width of the coupe :)

@misterdan2230 3 года назад

@@DriftJesus now thats embarrassing I've watched it atleast 3 times and still missed it lol ( aint watched it today though) 😅 well anyway its a epic build well done

@DriftJesus 3 года назад

@@misterdan2230 thank you, much appreciated

@aaabbb9953 3 года назад

Do you have build thread or smth with photos ?

@DriftJesus 3 года назад

Most of the worthwhile pics are in the video I think, otherwise follow my instagram followdriftjesus, may have some more on there!

@perryg8383 3 года назад

Super interessant! 🔥

@DriftJesus 3 года назад

Thanks! Komt nog veel meer aan!

@stilianjelev3006 3 года назад

Einzel, what is your recommendation for the driveshaft? I'm currently using bmw e90 325d gearbox behind my 1JZ in the JZX100 Chaser I have. in the front, im using the front part of a e60 530d driveshaft, with the OEM guibo thing (the round thing on bmw driveshafts). In the back im using the rear end of my Toyota auto driveshaft, which is connected as stock with bolts to the differential - which means i dont have any telescopic part anywhere in the driveshaft.

@DriftJesus 3 года назад

With giubo and two piece you don't need telescoping. Hard mounted engine and subframe + giubo , you could get away with single piece. We always go for single piece telescoping with solid flanges on BMW style boxes, but ofcourse preferred is GForce gearbox with slip yoke for single piece shaft. Anything single piece must either be slip yoke or telescopic

@stilianjelev3006 3 года назад

@@DriftJesus Thank you, sir. Your attendance in DW2 has been a revelation. I will be waiting for all videos you do on drift/race cars. And hopefully, at some point this year i'll try to order Feal Suspension for the Chaser through your company. p.s. I've always known that the e46 chassis is a great one to start a build with, especially for those of us living in Europe, and you are giving examples why it is

@DriftJesus 3 года назад

@@stilianjelev3006 yep, just shoot me an email and we'll be very happy to supply Feal; it will transform the car.

@RaceLifeByRicky 3 года назад

Do you sell or have the dimensiones of the engine mounts

@DriftJesus 5 месяцев назад

Email our office - info @ einzel . nl

@glennrosheuvel8688 Год назад

Yoo hele gave e46, welke body kit is dit precies?

@DriftJesus Год назад

Custom made

@keshav4324 3 года назад

Any tips for a 320D to m54 conversion?

@DriftJesus 3 года назад

Get an entire car to swap over, or you'll end up needing a million little things. Also, secure the oil pump nut with safety wire

@hadiq8965 3 месяца назад

tbh the car look so good but you have problem with wiring its really really alot of wiring you can put a fuse box behind the dash and make only the switches visible .... dont tell me its easier for changing a relay i have 2 drift pro cars and NEVA had any issues with relays

@DriftJesus 3 месяца назад

Thanks for your opinion. I like to have wiring on the outside so its easy to troubleshoot. If its a SEMA car I'll make it behind a dash. There is not "a lot of wiring" its just wired in a way that everything is fused, contrary to many racecars we had in the shop with problems where 80% of hot signal wires weren't fused. So no, its not a "problem" its exactly how I want it. The problems we see with clients in EU and USA is PDM's and wiring behind a dashboard in a caged car interior that you cannot work on.

@hadiq8965 3 месяца назад

2 cars for me . And other 6 cars i build my self with friends Now almost 5 seasons Never had an issue with relays and wiring .. or any electric problem All behind the easily removable dash .. if you are good with your work just trust your self and put them their ... i just giving you advice here you can take it you can leave it .. the choice is yours ..

@DriftJesus 3 месяца назад

@@hadiq8965 I think we built over 60 cars.

@hadiq8965 3 месяца назад

@@DriftJesus 60 cars like that ? Then you stopped improving at wiring detailing and position long time ago .. all things you do is ok But wiring ..... if am a customer i will be sad

@DriftJesus 3 месяца назад

@@hadiq8965 thanks, no advice needed. The reason we build wiring like that is because each component (engine harness, interior harness, switch panel between seats, center fuse / relay panel) can be removed in 30 seconds and all connectors are separate. This way, a mechanic can remove either of the components and measure or make changes rather than laying on your back in a caged car. Also, the indicator lights are fly back from the device rather than actuated by the switch. This way you know the device is really on, and not just the switch.

@cicodrifts309 2 года назад

Hey guys i have a question i have a e46 tha im gonna do a m50 swap as well can u guy tell me what would i need to make this possible?

@DriftJesus 2 года назад

Depends on the application, this car is standalone ecu and wiring and the mounts are custom made. There are no OEM motor mounts that work to put an M50 into an E46

@cicodrifts309 2 года назад

@@DriftJesus u sure cause i heard tha the m54 mounts can go on the m50

@DriftJesus 2 года назад

@@cicodrifts309 nope

@cicodrifts309 2 года назад

Thanks

@DriftJesus 2 года назад

@@cicodrifts309 internet is full of misinformation. And what people call "fit" often isn't fitting. The alloy motors are different from the iron motors and there is no set of mounts that works. Apart from that, in a turbo application you'll need a custom passenger side mount anyways, bottom mount is what you want on these motors.