No video :(

Building a $500 Avenger 85 Bike that can go 40mph+! (TY FOR 1K!)

Подписаться 2,4 тыс.

Просмотров 4,1 тыс.

50% 1

So, I bought the A85 kit from CaliforniaMotorbikes.com. Let's give it a try. Subscribe & Bell for more content like this!
Support: ko-fi.com/tren... (APPRECIATED!)
Discord: / discord
Instagram: / trent.bikes
Motorized Bikes parts: www.amazon.com...
Links to parts:
Avenger 85 kit can be bought on californiamotorbikes, or eBay etc.
15x27x5 = www.veryseal.c...
15x27x7 = www.veryseal.c...
I think Ali is cheaper, just may have to wait 2+ weeks
www.aliexpress...
10 Pack 6202 PGN Bearings: www.amazon.com...
If I forgot to link other stuff, let me know
tags (ignore)
super fast motorized bicycle, fast motorized bicycle, motorized bike tips, avenger 85 motorized bike, minarelli 70cc motorized bike, 100cc motorized bicycle upgrades, cheap motorized bicycle, how to make motorized bike faster, motorized bicycle top speed, 80cc motorized bicycle upgrades, fastest motorized bike kit, 100cc bicycle engine kit, la hover bikes, felt faker gas bike, 70cc athena motorized bicycle, athena motorized bicycle, 50mph motorized bicycle, 60mph motorized bicycle, 70mph motorized bicycle
#motorizedbike #moto #motorizedbicycle

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@dustinh4175 3 месяца назад

Who ever decided to make the avenger kit 200 bucks is very smart as they will sell way more and its just a nice thing to do.

@trentbikes 3 месяца назад

yep

@Roadscore 3 месяца назад

I agree. I never really wanted a Phantom 85.But this avenger eighty five kit looks pretty good especially for 2 hundred dollars

@dustinh4175 3 месяца назад

@@Roadscore the poor guys that built the phantom probably went bankrupt over that motor. Using a bushing for the piston was idiotic and I don't know if they figured out the ring problem. These sweet new motors keep coming with stupid exhaust tho.

@trentbikes 3 месяца назад

@@dustinh4175 the "poor guys" would the china factories, I believe, wanting to squeeze out more money. it took them 3 versions to finally use a proper needle bearing. three versions. They don't bother testing all chinadolls, as well as actually balancing the cranks etc. That's why they're so cheap. That's just my speculation though.

@justanothermotorizedbikech5138 3 месяца назад

Nice bro!! The second smaller spring for the clutch wire is so it keep pressure on the arm so your bucking bar, ball and pin that holds the arm locked in lasting a lot longer

@jorelldye4346 Месяц назад

I use a strip of velcro on the top tube and under the gas tank so that they get tightened down together. The velcro makes it impossible for the tank to slip even if the nuts vibrate a little loose.

@Harbingerofd00m Месяц назад

Those rubber engine mount pads also work great for the fuel tank, to keep it from rotating too easily.

@trentbikes Месяц назад

Yeah but it doesn't help with the stud welds cracking too easily and leaking fuel.

@sasquatch_886 3 месяца назад

Want to get one of those bad boys soon lol. Quick tip with spray painting the frame, I recommend in the future to sand down the frame say use 120 grit. Gives texture for the paint to bite, but use primer first. Paint multiple light coats take your time and just finish what you miss in the next coat so you don't drip. Use a clear coat last, any sheen doesn't matter. Just to give it a nice long lasting and pretty paint job

@trentbikes 3 месяца назад

gotcha

@R_Kyllonen 3 месяца назад

Great video bud. Keep em’ coming

@ExpediteTravels 3 месяца назад

I just got my felt faker and Avenger build put together I'm waiting on one of those engine mounted chain tensioners to show up because I keep popping chains off either. The chain is too tight or it's too loose and I did take 6 lengths out of it. I believe I'm running a 36 tooth sprocket on the back.

@trentbikes 3 месяца назад

Adjust the wheel axle position as well as motor. A little loose is fine like an inch up and down of slack

@keeganhache6667 3 месяца назад

Let’s goooooo also here’s a tip use a rubber mallet on the clutch shaft and put the nut back on the shaft before tapping it out hood video

@leonardarola 3 месяца назад

Loved it. Teck Talk. To the point. Thanks for sharing.

@mikemiller3303 3 месяца назад

Cool beans brother I know you liked the power lol I have a phantom 85 version 2 none of them issues you described but I changed a lot of the parts to sthil 52mm 044ms440 big bore piston and rings and 10mm pin bearing 1085 miles so far so good be safe brother I like the avenger 85 as well

@trentbikes 3 месяца назад

nah, it was actually weak tbh. Boring. It does have a nice pull that's all I gotta say, from dead stop ish. I'm on 36T btw. It only topped out like 6500-7000 rpm ish. (up to 36mph) (Still breaking in). I'll be doing upgrades and mods to it then it should scream

@RustyShakleford1 3 месяца назад

@@trentbikesis it better than a minarelli?

@trentbikes 3 месяца назад

@@RustyShakleford1 No. Minarellis are more powerful unported than stock a85

@sebas5688654 3 месяца назад

I wanna to see how you will travel on the moped!

@Littleevil9975 3 месяца назад

Good video bro great motor

@dustinh4175 3 месяца назад

I ordered a 110 iron sleeve before I found out they suck and the company sent my a yd100 with the 12mm piston pin and refunded me 60 bucks so I got the whole kit for 60. I think an avenger top end will work with the yd bottom end so I'm gonna try it

@trentbikes 3 месяца назад

the 110 bottomend will be perfect for hybrids. Like, larger saw cylinders, big iron minarellis/jogs, etc. That's all. The transfer ports on the case are perfect. Just that the 110 cylinder is awful from what I've read/heard.

@SuperTrikeBicycle. 3 месяца назад

Cool video bro

@jasonburque 3 месяца назад

Just got the LD head

@JulianJaimez-eb2jo 3 месяца назад

So i ordered the avenger 85cc from go max industries i also ordered a olyin cnc head and a dio reed valve im thinking of ordering a pwk 24 and a nitrous bottle 🍼 just for the boost im a big boy 240 pounds

@trentbikes 3 месяца назад

pwk24 seems too excessive. A nibbi 19 or pwk21 will do

@alrums 3 месяца назад

About time

@makzy69 3 месяца назад

nice video bro

@davidzelik6579 3 месяца назад

Very nice videos, keep it coming. What power mods woud you recommend for my 80cc engine? I have hikone 216 exhaust, pwk 21 carburetor, g2 reeds, ported cylinder ( exhaust, intake trench). I am 17 from Czech republic. If there are any good cheap cylinders, what you'd you recommend? Thanks from Central Europe😉

@trentbikes 3 месяца назад

If you want more power and all your upgrades/mods aren't cutting it, I'd get an iron minarelli (a whole motor kit for $200 on cmb) or just swap the cylinder with an athena sport for $170 on amazon (look up athena 070100), needs to be 45mm stud spacing and the stud holes need to be drilled wide to fit 8mm studs (unless yours is 6mm)