Fresh Assemble of Motor-Bicycle. 2 stroke Minarelli 70/81cc

Подписаться 2,4 тыс.

Просмотров 15 тыс.

50% 1

"6hp" 2 stroke Race Bicycle Motor Fun!
We fully assemble this odd ball motor-bicycle. We run the sandblaster for paint preps, we modify brand new parts to adapt to our needs.. "reluctantly" watch me struggle my way to success!
First Hand Insight to the Wildcat Ultra Minarelli 6hp Race engine!
Chapter list
00:00 intro
01:45 Bike Unbox
04:31 Fuel Tank Preps
08:51 Wheel Sprocket
16:00 Grips and Controls
18:01 Tank Placement
21:36 Double Brake Lever
22:22 Minarelli Install
25:54 Chain Install
29:08 CDI Install
30:07 VM20 Carburetor Install
33:45 Clutch Cable and Bracket Fab
34:55 MZ65 Pipe and Problems
37:56 Build Wrap Up
45:41 Time to make Smokes!
48:38 First Run
49:30 Lots of pedaling And saw a COP
50:50 Carb and Sparkplug Adjustments
53:14 What my carb adjustments did
53:51 My AskS
54:17 More Carbs and Sparkplugs SHED RUNZ LOL
57:28 BURNOUTS and final Drive
59:08 Temperature readings
59:40 Outro
Most of the stuff I bought for this build, I could not remember everything.
Amazon links are paid to me for future builds. Help my Beer drinking habit!
AuX fuel Tank
amzn.to/42BK0sN
MZ65 Pipe for Minarelli
/products/real-mz-expansion-pipe-with-minarelli-intake-for-80cc-bicycle-engine-kit?_pos=1&_psq=mz65&_ss=e&_v=1.0
Minarelli Motor
www.californiamotorbikes.com/...
VM20 Makuni Knock off Carburetor
www.californiamotorbikes.com/...
Install Kit MINUS THE ENGINE
www.californiamotorbikes.com/...
Exhaust gasket
scooterswapshop.com/products/...
Kent Bayside
www.walmart.com/ip/Kent-26-In...
Bullet Connectors Feggisuli 400pcs
amzn.to/3RT4KHI
Rust-oleum 2000 degree spray paint
amzn.to/3HhamXx
SealAll
amzn.to/420kL3p
Double Brake Cable single lever
amzn.to/3HjOcnf
Chain Breaker
amzn.to/3RXb7tI
Keihin Jets.. For the tune Video which is next in the playlist....Or should Be
#motorizedbicycle #twostroke #motorbike #2smoke #backyardmechanic #mechanical #workshop #fab #coldstart
@completetoiletgarage
go check out youtube.com/@CompleteToiletGa...
Welcome To ColdStart Garage. We have a great time on this channel!
How to reach me!
coldstart83@gmail.com
Instagram @ coldstart The link is in my about me tab
Thanks for watching ColdStart Garage!

Авто/Мото

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 171

@stephenmatson3239 13 дней назад

I like how you include the whole trial and error process in your video. It makes it more relatable to most of us that have gone through it lol. Its amazing how it always seems like its going to be easy to build but theres always unseen variables... Heres a tip that i recently learned that noticeably improved the timing of the motor and performance... Side gap the spark plug. Thanks for sharing your experiences. I definitely learned a couple thiñgs from your video that i will try out on my

@ColdStartGarage 13 дней назад

Some people like my style and some people absolutely hate it. I am not a how to channel. I’m just a guy who like to record stuff in my shop or driveway I really appreciate your kind words! Thanks for the view and the comment. It was a joy to read. 🤘🏻🏁🏁🏁

@user-ut3hg6yu2n 5 месяцев назад

You have a great way of keeping us entertained as you show the build.

@ronneihart 6 месяцев назад

😮 I also learned that you need hardened bolts. For the motor mount and the sprocket. Been there done that

@keithfreeman5204 2 месяца назад

Beach cruiser, "80" engine, High Compression Head, Tuned Pipe. Longer Intake, 2 intake manifolds bolted together w/ gasket, NT Carb with a #67 Jet. I tune these engines just like I would for a chainsaw, trimmer or a back pak blower. I found most important for these engines is to simply WARM THEM UP. 10 minutes at high idle, then idle down to "comfortable" idle. If you really listen to the engine running when it's running rich, popping, when it's running in 2 cycle it will smooth and with good power.

@TheVonhollan 4 месяца назад

Assorted Zip ties worked for me.Yet mine was a Schwann beach cruiser , when I go finished with it looked like a WWII motor bike. Just a thought and it works Double side tap for the tank is good also. Now i need a trailer , to hall my tools to fix it and a side car for my dog! Loved the VID keep it up.

@ColdStartGarage 4 месяца назад

Thanks for the kind words and the view. 🤘🏻🏁

@theLyzhendricks 6 месяцев назад

Man all ive used is marine oil for my bikes send it ive never had a problem

@ColdStartGarage 6 месяцев назад

Me either! If it’s good for the fish it’s good for the birds

@theLyzhendricks 6 месяцев назад

Sweet ive ben waiting for a update

@ColdStartGarage 6 месяцев назад

Here it is! It took a hot minute🤣🏁🏁🏁🤘🏻

@jmrides777 6 месяцев назад

Yeah Buddaayyy.........ColdStar Garage heating up again!!!

@ColdStartGarage 6 месяцев назад

Blundering my way through another build. We always get to the finish line 🏁🏁🏁

@jmrides777 6 месяцев назад

@@ColdStartGarage Don't be so modest, you're ultra pro in my eyes 😎

@ColdStartGarage 6 месяцев назад

lol. If you say so. Wait till you get to the tuning section 🤣

@BuildBreakFix 5 месяцев назад

Legend has it he still to this day has 9 & 9/10 th's of all his fingers 😂👍 Looking good! Happy new year!

@ColdStartGarage 5 месяцев назад

You see me pinch my finger? 🤣🤣🤣 thought of you instantly

@earnestmontgomery3796 3 месяца назад

Dude, you are hilarious. Great delivery and screen presence. More moving pictures!!

@ColdStartGarage 3 месяца назад

Thanks for the kind words. I have content on back burners, I’m wrapping up my Honda motorcycle project then back to motor bicycle content. I am long overdue for content. But the Honda took a ton of time and money over the winter. Thanks for the comment! 🤘🏻🏁🏁🏁

@earnestmontgomery3796 3 месяца назад

@@ColdStartGarage I completely understand! I'm stoked to see it when you finish!!

@jhfirebstone8496 Месяц назад

I do enjoy your videos and it's abit of entertaining and knowledgeable at the same time which I enjoy Thankyou for what you do

@ColdStartGarage Месяц назад

Thanks for your kind words

@B0r3dsBikes 6 месяцев назад

loved this video man was amazing lookinh forward for the carb tuning video merry christmas

@ColdStartGarage 6 месяцев назад

Thanks guy. Get it running and down the street was more important than a final tune. At least to get something published for you guys anyways

@ColdStartGarage 6 месяцев назад

And merry Christmas to you as well

@loud.p500 6 месяцев назад

I dont understand how you only have 1.8k subscribers, youre probably my favorite youtuber lol. Also what paint stripper did you use on the gas tank?

@ColdStartGarage 6 месяцев назад

I don’t put out a ton of videos. Maybe RU-vid doesn’t like to push my content. The stripper is bought off the shelf out of Lowe’s. In the painting section. It’s around 20 dollars for the can

@FearTheWhite88 6 месяцев назад

Woohoo! Been waiting for this video!

@ColdStartGarage 6 месяцев назад

I hope you enjoy. It’s a long one

@keeganhache6667 5 месяцев назад

That thing needs some carb adjustments for sure

@mikek2879 6 месяцев назад

Looks exactly like a china doll, but has an Italian name to make it sound exclusive and exotic, lol.

@ColdStartGarage 6 месяцев назад

The motor link is in the description if you want to hook your eyeballs on it.

@ColdStartGarage 6 месяцев назад

Deff has a more substantial cylinder. It’s not your “typical” China doll cylinder. It is bolted on a China doll bottom end

@AVERAGEJOERC 5 месяцев назад

Its basically the same bottom end

@Projects5309 6 месяцев назад

Nice presentation, covered about all of it. Cant wait to see that carb get dialed in so I can borrow your recipe.🏁

@nickturner3918 6 месяцев назад

Hahaha not this way 50:05 im the same way here in upstate New York You always gotta do stuff 2 or 3 times maybe 4 but never just 1 time it’s in the manual lol Definitely a sail boat fuel leak in between carb an intake I’d guess I wouldn’t be surprised if one of the crank seals are leaking too

@ColdStartGarage 6 месяцев назад

I’ll be checking all the things soon. Winter is brutal for bike stuff. I need a bike stand for tuning. But I found my oring looking weird when I wrapped up this video.

@leonardarola 5 месяцев назад

Very good for a non pro, as you put. Expensive, bro? You just don't know yet... Lol Very great call on them fenders, let them know about it! 49:10 sounds bad. Try 35/95 jets .

@ColdStartGarage 5 месяцев назад

I am aware how deep this hobby can go. I see custom built motors going for 1500 plus.. everything adds up. Thanks for the words! 🤘🏻🏁🏁🏁

@leonardarola 5 месяцев назад

@@ColdStartGarageyup. Mine is 2. Great video by the way. B8HS is king, grab all you can, out of production and disappearing fast.

@davidreeves2596 25 дней назад

The Vice Grip Garage of Bikes.

@ColdStartGarage 25 дней назад

If I had 1%of his talent I’d be successful 🤣 but I’m happy to be just doing what I do

@4514rooster Месяц назад

Nice ride!

@ColdStartGarage Месяц назад

Thanks!

@4514rooster Месяц назад

@@ColdStartGarage I got a couple builds if you want to check them out!

@Bobs-yer-uncle 6 месяцев назад

I would get a set of them BBR 12g rims with disk brakes and mount the sprocket to the disk mount and still use the caliper rim brake you'll need a different sprocket though unless you want to drill it out nice build man

@ColdStartGarage 6 месяцев назад

They look great. You recommend these over Gemini wheels?

@Bobs-yer-uncle 6 месяцев назад

@ColdStartGarage I would say if you're just riding on street and not pushing crazy power yes the Gemini rims are awesome but overkill in my opinion unless you race or have really bad terrain

@Bobs-yer-uncle 6 месяцев назад

@@ColdStartGarageI would also suggest if you do get the bbr ones to true and tighten the spokes and adjust the bearings they are great for the price but do not come ready to go

@ColdStartGarage 6 месяцев назад

@@Bobs-yer-uncle thanks for your input. I just build these to put around on and give my few subs something to watch. So I will not ever be racing these..

@BAMFSpYdy 18 дней назад

I just bought this same bike (gray) yesterday and have a Firestorm Zeda 80 coming Friday. This will be my first build. I actually got this bike because of the fenders. LOL. Going to be building mine in 100 degree weather (Arizona). Your video gave me some good info. Like mounting the gas tank and engine on this frame. I never though about the double bar being a problem for the rear gas tank mount. Thanks! Oh, and the double cable brake lever too.

@ColdStartGarage 18 дней назад

Be careful with fenders. Obviously you know they look great….. but looks can kill! There are way better options out there for brakes. I just had to get it moving

@BAMFSpYdy 18 дней назад

@@ColdStartGarage So I assume the fenders have caught the tire in the past?

@ColdStartGarage 17 дней назад

It’s a very common issue with these. Sends a ton of people to the hospital and many to the grave yard. So I just avoid that risk

@BAMFSpYdy 17 дней назад

@@ColdStartGarage I found this video on how to reinforce the fenders to keep them safe. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H5r6p4OD1HY.html. I'm going to do this today and see.

@alejandrop.r.7038 4 месяца назад

u remember me when i make my first motor-bycicle in 66cc pk80 good video dude

@ColdStartGarage 4 месяца назад

Are you telling me to remember you or asking if I remember you?

@alejandrop.r.7038 4 месяца назад

@@ColdStartGarage You make me remember when I made my first bike 5 years ago

@ronneihart 6 месяцев назад

Especially with a minerali

@edwardboyle7877 23 дня назад

Hey man I used a cup that u get with kids cough syrup and I just rubbed the cup on cement until outside edge was smooth and u drill hole in bottom of cup for axle to go thru an put it over hub then put sprocket on andalso i drilled out sprocket on drill preS and I used 3/8-16 grade 8 bolts with nylock nuts wor great and bigeer bolts holds better

@Gavin-oq5nl 4 месяца назад

You should look at what bikeberry put out on cleaning up the head and intake/exaust port videos! They REALLY help with performance

@ColdStartGarage 4 месяца назад

I will be diving into intake/exhaust ports sometime this year. Thanks for the heads up!

@larryshaver3568 2 месяца назад

I like the mustard yellow on the sprocket

@ColdStartGarage 2 месяца назад

Thanks. I think the color scheme came out pretty good. For the most part🤣

@larryshaver3568 2 месяца назад

@@ColdStartGarage it adds a contrasting accent

@ADREISTER Месяц назад

I want to have AI over-dub this entire video with my face and voice, because this is what i would do on my first motorcycle project. 😅🎉👍🏻

@ColdStartGarage Месяц назад

Tag me in it! I’d watch it🤣

@danialthomas5659 2 месяца назад

I forgot tuning a bike is like a triathlon

@ColdStartGarage 2 месяца назад

I have not got the chance to dial this pig in yet. Winter was long and now everything is wet. My other projects have my full attention right now

@LegendaryGodKing 5 месяцев назад

Damn! I've never seen a blue one! I've done black brown and red baysides

@keeganhache6667 5 месяцев назад

0:40 oh yes we need to

@theLyzhendricks 6 месяцев назад

Man when it hit it really hits i hope u get it tuned soon i luv riding vids

@ColdStartGarage 6 месяцев назад

I’ll get her dialed in. I’m not one to quit. I just had to edit for you guys. Youse waited long enough for this build. Ps I plan on doing a series on the Minarelli. There is so much more learning that needs to happen 🤘🏻🏁🏁🏁

@yougod7253 5 месяцев назад

Yep

@larryshaver3568 Месяц назад

did you move the clip on the jet needle? i could tell it needed more gas

@ColdStartGarage 12 дней назад

In this video the spacer plate is upside down🤣

@darkstar92772 Месяц назад

Did you check your axles? It’s been my experience with box store bikes that the bearing never have enough great and the bolts are too tight or too loose.

@ColdStartGarage Месяц назад

This machine darkstar… I have not had the opportunity to work out any issues or discover anything yet. But I promise I will. Motorcycle is “done” so I’ll just have to edit that video then I can start back at motorbicycle videos asap. Busy week here at Coldstart house. Prepping for Memorial Day festivities for the family. Time is hard to come by right this second 🤘🏻🏁🏁🏁

@darkstar92772 Месяц назад

@@ColdStartGarage I asked because used to work in a bike shop and have seen some really dangerous things with box store bikes. Most times the people who assemble them are paid by the piece so they have the incentive to pump out as many as they can. I’ve been watching a lot of videos and I don’t really see people checking out things like crank, wheel and headset bearings. Maybe they do but not on camera. Good video. I learned quite a bit.

@jamesdeloye8036 21 день назад

which pipe you talking about "leg burner 9000"? and would it require 100 modding?

@ColdStartGarage 21 день назад

The leg burner is the pipe that comes up high instead of down low like the one I have. I don’t think it will require modifying. But I’m not sure 🤔

@JeffWalters-ln1es 6 месяцев назад

Need a carb insulator in between carb and intake

@JeffWalters-ln1es 6 месяцев назад

Trust me i learned the hard way to and a real mikun vm20 from treatland would b a great 👍 improvement trust me I had to learn it all the hard way but mine scream currently building an athena sport mineralli

@ColdStartGarage 6 месяцев назад

@JeffWalters-ln1es a real vm20 was too rich for me. Maybe later

@JeffWalters-ln1es 6 месяцев назад

@@ColdStartGarage lol then u will continue to have issues with tuning

@JeffWalters-ln1es 6 месяцев назад

I’ve got 2 China clone junk both r shit

@ColdStartGarage 6 месяцев назад

@JeffWalters-ln1es strong possibility 🤣 when I get sick of dealing with it… I’ll huck it in the weeds!

@carlosapl1603 5 месяцев назад

Greetings from Costa Rica to start the engine easier use a drill with a 14mm socket next to the coil

@ColdStartGarage 5 месяцев назад

Might just try that. Thanks!

@darkstar92772 Месяц назад

Likes and subscribed bro.

@ColdStartGarage 12 дней назад

Thank you! Welcome to the fun

@garygullikson6349 4 месяца назад

It seems that motorbike folks really want Honda Trail 90's except they are more expensive, more complicated, getting hard to find and hard to get parts for. Trail 90's struggle to go 50mph and require MC licenses.

@ColdStartGarage 4 месяца назад

Well I’m not made of money that’s for sure

@garygullikson6349 4 месяца назад

@@ColdStartGarage I was thinking of buying an old Trail 90 and getting it running. My '68 has a shifting problem.

@joshuamoon8442 5 месяцев назад

So where you get the chain? Send link please.

@ColdStartGarage 5 месяцев назад

The chain came with the engine install kit. But here is a link anyways CNCMOTOK 415H-110L Chain amzn.to/422mJ2X

@josechay4098 4 месяца назад

Does it reslly out perfom the phantom 85?

@ColdStartGarage 4 месяца назад

I never tried the phantom 85. I have an avenger 85 that’s waiting for me to get off my a$$ and do something. Even if it’s wrong. I just got a replacement cylinder this week for the avenger. So stay tuned 🏁🏁🏁

@dynamicdirector5156 5 месяцев назад

You must be kin to derek from vice grip garage lol😅

@ColdStartGarage 5 месяцев назад

I hear this a lot. No relation just a co worker 🤣

@Westhelockpicker 3 месяца назад

I have a pwk carb on my spare bike and I'm still tuning it

@ColdStartGarage 3 месяца назад

China clone makuni, the guys on the forums say they are a bear to dial in. I’ll give it a good go as soon as the weather breaks. That Honda motorcycle has been getting all my attention. Gotta make room in the shop

@Westhelockpicker 3 месяца назад

@ColdStartGarage that's because the nt or bofang that comes with the kit only has one screw to adjust the idle. These have a lot more to tune. Mine runs pretty good but I'm going up one more size on the main jet

@ColdStartGarage 3 месяца назад

@Westhelockpicker my Minarelli came with just the motor. I sourced the rest of the parts. I wish I found the full kit before I started that journey

@Westhelockpicker 3 месяца назад

@ColdStartGarage I have so many spare parts it's crazy. I started out with the 66cc engines then I put the phantom 85 on my main bike and the yd100 on my spare. All the extra gaskets and rings and everything else I have won't fit the bigger engines

@ColdStartGarage 3 месяца назад

@Westhelockpicker it’s a fun hobby. I have an avenger 85 build I have planned for the spring.

@larryshaver3568 23 дня назад

how big is the piston in that Minarelli?

@ColdStartGarage 23 дня назад

At this point in time I don’t recall. It was purchased CMB. The info may be on the website still

@kennyshaw-oo9nw 3 месяца назад

Did that new paint keep the gas from leaking out

@ColdStartGarage 3 месяца назад

I put redkote gas tank liner in the tank. And went really easy on the install. This movie is broke down in chapters if you don’t have all the time

@ColdStartGarage 3 месяца назад

So far no gas leaked out…. But the tank is from China so time will tell

@larryshaver3568 Месяц назад

how much was the bike? i may get one if it wasn't a great deal of money

@ColdStartGarage Месяц назад

It was around 200 just for the frame. Which is not a steel frame. The whole build was around 800

@darkstar92772 Месяц назад

Is the extra money you spend on all the other stuff worth it? I’m in the R&D phase of building my first bike.

@ColdStartGarage Месяц назад

Can you expand on that question. What extra stuff are you implying?

@darkstar92772 Месяц назад

@@ColdStartGarage By “extra” stuff I mean buying a complete kit vs piecing it together like you did. I guess I kinda answered my own question because at the end of the day you get what you pay for.

@ColdStartGarage Месяц назад

Minarelli build isn’t what I would tell you to build for your first bike. There was a lot of work sourcing all the parts. There are full kits that will get you building without issues: If you have patients go for it. But there are a ton of other options that are complete builds in one box. Good luck on your adventures 🏁🏁🏁

@darkstar92772 Месяц назад

@@ColdStartGarage I’ve been looking at the Phatmoto builds and they are pretty reasonably priced right now. But I do like the idea of building my own and getting it dialed in.

@Motorizedstuff Месяц назад

Sounds fine to me alittel bogged on the bottom revs but fine top end

@ColdStartGarage Месяц назад

I put the spacer on backwards. Major air leak. The next video in line I discovered that

@randycope832 3 месяца назад

Set your sparkplug to.06

@dylanpicquet8149 18 дней назад

Try putting an O-ring in

@ColdStartGarage 17 дней назад

My second video I figured out my issue. My spacer plate was on up side down

@TA-xj5we 6 месяцев назад

👍🐿😂🚲

@Motorizedstuff Месяц назад

Turn all the way in and 1 and a half out work from there

@KennedyCopy 4 месяца назад

Does burnouts... if you're not sitting on it and lift the rear tire just off the ground

@ColdStartGarage 4 месяца назад

It does burnouts.. if you put it in the ketchup and dump the clutch. I don’t recommend it. It’s hard as hell on the machine

@ColdStartGarage 4 месяца назад

Deff can’t sit on it and do a burnout. These motors are not that robust.

@KennedyCopy 4 месяца назад

@@ColdStartGarageI have one so i know. The first company to sell a two-stroke kit engine that actually has some bite will absolutely clean up i'm surprised that nobody has taken a Honda 50 and cloned it (china if you're listening...)

@ColdStartGarage 4 месяца назад

@KennedyCopy oh that be a wet dream right there.

@user-ju1du2sm6b 5 дней назад

Ergonomics Killin me always on these bikes looks a very silly body position to be driving and not pelading ( thinking a solution for it )

@ColdStartGarage 5 дней назад

Maybe put some forward foot pegs on the bike. I haven’t given it much thought honestly

@Wodyo 4 месяца назад

Ouch! $140 for that pipe?

@ColdStartGarage 4 месяца назад

Yup check out the link in my description. Not cheap

@fletcherjacobs3688 5 месяцев назад

Jet down.

@josechay4098 4 месяца назад

Top speed?

@ColdStartGarage 4 месяца назад

Still have carb tunes and a break in to do. So 35 is top speed right now. She is lean full throttle

@ColdStartGarage 4 месяца назад

I have the carb jets, I just don’t have the warm weather or sunlight to do anything right yet

@ronneihart 6 месяцев назад

Plus regular brakes don't work with a minor rally you got to use hydraulic

@ronneihart 6 месяцев назад

Putting a minarelli on a tent bicycle is a mistake you'll need to beef up all the spokes that works for China dolls a store-bought and bicycle but not for a minerali. I would never buy nothing but a minarelli those others are just a waste of money

@ColdStartGarage 6 месяцев назад

I’ll upgrade the wheels later. But for the sake of time and money. This is what I could scrape up

@theLyzhendricks 6 месяцев назад

People dont understand that lol i do the same send it till it becomes a problem then u fix it@ColdStartGarage

@dannyoutlaw8001 5 месяцев назад

@@ColdStartGarageexactly brother... you did right ... those wheels are way stronger than people think

@AVERAGEJOERC 5 месяцев назад

Sure sure.. u bought a high end kit.. and it works.. been done.. what i want to see is taking the very bottom dollar cheapest 💩est engine and make it rip reliability.. i bought my kit on ebay came with everything..90 bucks complete kit free shipping and all.. and what can i say.. it works perfectly.. moved the needle up 2 clicks and thats it..40t sprocket..big cooling head. fatty pipe.. thumb throttle.. 40mph top end.. 25 mph cruise comfortably.. 5 dollar garage sale cromoly frame 90's hardtail mt bike.. all in 150 bucks😮 including upgrades 😂..

@ColdStartGarage 5 месяцев назад

I would not call this version of minarelli a high end upgrade. But I get what you are saying. I’m still trying to keep my content of the affordable range for me and the viewer 🤣 this build cost me 800 for every thing including the bike. But I like where your head is at 🤘🏻🏁🏁🏁

@ColdStartGarage 5 месяцев назад

The way I feel about RU-vid… everything has been done before. But for me I don’t watch motor bicycle content. I experience it first hand, you the viewer watches me experience it first hand. I do get a lot of insight from my subscribers/commenters and I follow forums on Facebook so I know what’s out there. I would not identify as a motor bicycle channel exclusively… even though I do have a decent amount of it.

@AVERAGEJOERC 5 месяцев назад

@@ColdStartGarage ya i have a bunch of different crap im working on all at the same time so i can relate.. i have all the equipment to make videos.. just feel i dont uave the personality for RU-vid.. your hilarious and i like what i saw so u got my sub.. not trying to critique anything.. sorry if it came out that way..

@ColdStartGarage 5 месяцев назад

@timhulett5150ify hey. If I can film stuff and post it.. anyone can. Look at my old videos. My on screen personality sucked. It just takes a bit of practice. And if you already have the machines you have the content.. But if you feel like filming will get in the way of your passion and hobbies… that’s something else all together. Thanks for the kind words.

@williamholtz6337 4 месяца назад

Painful

@ColdStartGarage 6 месяцев назад

Time stamps and Parts List with Links in the Description! Merry Christmas and Happy Holidays!

@chrismayberry4315 6 месяцев назад

Merry Christmas Adam! Can't wait for a new year of content buddy ! Try to keep her rubber side down guy !

@ColdStartGarage 6 месяцев назад

@@chrismayberry4315 thanks Chris. I have a couple things planned for winter content. Shed that has heat gives me a few more options than last year

@chrismayberry4315 6 месяцев назад

@@ColdStartGarage your shed came along really well this year and oh I could imagine heat is nice !

@ColdStartGarage 6 месяцев назад

It’s at least usable and the roof doesn’t leak anymore

@darryldaugherty8540 3 месяца назад

1¹1¹1¹chi@@ColdStartGarage

@MrFlobot69 3 месяца назад

Smfh. Weld the damn stinger back on the end of the expansion pipe. Wtf man. Wtf. Weld the ORIGIONAL STINGER back onto the pipe. Try not to change the angle too much unless you have to.

@ColdStartGarage 3 месяца назад

I have the 1 inch piece around somewhere. 🤣 it will be all right. The problem with this build is the minarelli plate was installed upside down

@larryshaver3568 23 дня назад

atrocious would be putting it nicely

@jasonburque 4 месяца назад

Kent Bayside is garbage 😂 get a steel frame especially if you're limited in funds... Don't waste your money...

@ColdStartGarage 4 месяца назад

What you recommend? I’m all ear! 👂

@jasonburque 4 месяца назад

@@ColdStartGarage hyper beach cruiser in that price range with some 12ga wheels

@ColdStartGarage 4 месяца назад

Thanks. I’ll look into it for my avenger build!

@MB-xq3ol Месяц назад

Been riding china dolls for 25 years motorcycles 50 years , you have poor brakes on that bike, those side pulls are useless, v brakes are best, use 90s chromoly mtn bike frames, you dont need to take left side clutch arm cover off to install chain just feed it in from the top slowly, your too rich on mixture. I have a bike with minereli engine bike and powerband is at top rpm for racing ok but regular riding not so good and its a kick start w auto clutch. I watched you ride it and it has the similar top end power band and a manual clutch. The original morini engines were kick start and auto clutch looks like your main jet might need to be bigger. The old days we would get micro drill set and find the drill that fits then drill it out next size or solder it and drill out smaller. Also the stock gas filter does no flow enough. Thanks for the video the ports on the engine are huge. The stock tanks 5 mm bolts leak fuel and you have to clean tank with water many times and then braze them back with cap and petcock taken off. sometimes and I weld flat bar on the frame so the tank doesnt flip.