Building A 3 String Cigar Box Guitar from Start to Finish

Подписаться 95 тыс.

Просмотров 29 тыс.

50% 1

I'm building a new cigar box guitar to take to an upcoming guitar show. This is the full build, from start to finish. This guitar turned out great.
Print your own Radius Blocks - www.etsy.com/shop/HomeBuiltWo...
Check Out Skyscraper Guitars - skyscraperguitars.com/
Want a Printed Radius Block? I have them here. www.homebuiltworkshop.com/pro...
My neck alignment jig - • Homemade Guitar Bridge...
** Affiliate Links to Products Used **
Boss Katana MK2 EX - amzn.to/3liEo5E
Boss GA-FC Foot Controller - amzn.to/3mXaep0
Titebond Original Wood Glue - amzn.to/47eN27Y
** Visit My Website **
www.homebuiltworkshop.com/
** Check Out My Handmade Guitars **
www.hayleyguitars.com/
** Save 10% and get some awesome CA Glue from Starbond **
bit.ly/2WJmxbL
** Ways To Support HBW **
www.homebuiltworkshop.com/sup...
** My TeeSpring Store **
teespring.com/stores/home-bui...
** Check out my Amazon Shop **
www.amazon.com/shop/homebuilt...
** Join the HBW Built not Bought Facebook Group **
groups/homebuiltworkshop/
** Connect on Social Media **
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
** My Mailing Address **
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#cigarboxguitar #guitarbuilding #homebuiltworkshop

Хобби

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@skuda111 8 месяцев назад

Mmmmm , is it possible to make one with a hand saw a hammer and an electric drill , all them tools you use would cost me as much as a hundred cigar box guitars 😂

@TheHairyDude Год назад

"FEEDBACK!!" That high gain sound was very cool.🤘🤘🤘

@thumpershd 22 дня назад

Very cool, great job on this fun CBG!

@homebuiltshop 21 день назад

Thanks, this is one of my favorites.

@user-zy4fx7vg4r 4 месяца назад

Nice sustain!!!

@robinfawcett7973 Год назад

Great! - love the care you took making that. Sounds amazing fun...

@robertr4193 Год назад

Nice cigar box guitar build. It also sounds really nice and has a lot of sustain.

@JohnnyHurbonConnections 10 месяцев назад

Very nice tools, machines, as long as you have been putting out videos, I am always amazed, entertained and appreciative of your work. Thank you. As far as acoustic goes, I believe the lighter better.

@BrianCapezzone 9 месяцев назад

What an awesome build!

@lokispeicher8103 8 месяцев назад

Basically this is neck through guitar ...All you need is to slap some wings on either side of that thing and you got a little cigar box firebird.. .. she's great work.. Nicely done ..

@urbanlumberjack Год назад

Awesome build!

@jimweaver5010 2 месяца назад

Really enjoyed watching and learning. I am attempting my first CBG build and have been feeling my way through and making learning mistakes.

@BAGHEAD1995 Год назад

Great build!.

@JimTate 9 месяцев назад

One of.the best CBG I've seen. Great job

@homebuiltshop 9 месяцев назад

Thanks so much. Its available if you know anyone interested.

@JimTate 8 месяцев назад

@@homebuiltshop do you have a catalog?

@homebuiltshop 7 месяцев назад

You can check out www.hayleyguitars.com

@dgperforms1 Год назад

Good work Bro

@markwallin 4 месяца назад

I like it, all I can say for now. Now where did I put those cigar box's?

@123pap 9 дней назад

Cool

@hurdygurdyguy1 11 месяцев назад

6:47 .. my first cbg ran into that problem... from then on I designed my builds such that the neck can slide all the way through from the opening to the back of the box, the neck is screwed in place, top and bottom for easy removal for repairs if necessary... Just my own observation and opinion: I think the bracing in your box is overkill! 😉 And thank you for pronouncing Shinto correctly! A favorite cbg builder youtuber of mine always says Shin-too! I tell him there are no Shintoo shrines in Japan! 😂 (now if only I can convince him there's no such thing as a "Fostner" bit!) 20:47 OMG! I need to make one of those!!!

@lokispeicher8103 8 месяцев назад

.. to me it does seem like a lot of blocking inside there I'm fascinated now as to why... no neck dive here huh? Basically I need to stop reading the comments while I'm listening to the video... carry on😊

@scottmorris4914 Год назад

It looks great, never find a cigar box like that around here. Guess will have to make one. Where did you get the specs for your guitar neck, or did you just follow a tele neck? Actually where did you get the design at all? Also, where did you find the 3 string hum bucker pickup? I am only seeing 4 string pickups.

@nev2454 7 месяцев назад

Great video, love the way you work, very precise. Could you please tell me what type is the glue that you use. Many thanks in advance.

@homebuiltshop 7 месяцев назад

I use Titebond Original. There's a link in the video description.

@nev2454 7 месяцев назад

Many thanks, I'll see if I can source this in Aus 👍👍

@user-pg3vg6yc6j 11 месяцев назад

If you make some 1/16" rabbets in the neck where it fits in the box you will have enough space to close the box and it will give a little room for future expansion that if joint were tight could cause box to split. Im assuming you are using hardwood for neck and 1/8" of material removed won't effect integrity of the neck.

@AsrarDryLips 7 месяцев назад

Do you make your own 3 string Humbuckers Pickups?

@dgperforms1 Год назад

I actually use a 50 watt Fender LT50 for Gigs every Saturday. 50 is more than enough for most any Bar

@homebuiltshop Год назад

I agree.

@royalmaster203 Год назад

thanks for showing the build, about how much $$ went into making the C box guitar?

@kennethjohnson573 8 месяцев назад

Want to see you build a bass guitar out of one

@homebuiltshop 8 месяцев назад

Thats a great idea. I haven't made one of those. Its going on the list. Thanks for that suggestion.

@richardjones1754 7 месяцев назад

Nice And Easy ' IF ' You have a garage or workshop full of TOOls AND Machinary !!! 😂

@PKD-ze4hr 11 месяцев назад

I am just wondering if the neck and the attached pieces of wood sit on the bottom of the box or the top?

@tracyreed2115 6 месяцев назад

Dude !!. You make a cool cigar box guitar !!. How can I get you to make me one ? If possible. ??

@dougalexander7204 11 месяцев назад

Noice.

@homebuiltshop 10 месяцев назад

Thanks!

@scottmorris4914 Год назад

so, the neck sits 1/8” proud of the top. and then you add the fret board. When looking at the video it seems the neck is higher than an 1/8”. Sorry for asking, want to build my first one, and I amseeing a lot of rvideos on making them, but not the info for measurements. This si the ifrst I have seen where this info is being given, and thank you for this.

@MikeTheSith200 Год назад

southpaw!

@homebuiltshop Год назад

Yeah!

@scottmorris4914 Год назад

Where did you get the bridge?

@RockStarOscarStern634 6 месяцев назад

Home Built Workshop How about converting it into a 6 string CBG in Bb (tuned D, G, C, F, A, D).

@neilforehand1121 4 месяца назад

What finish do you use on the neck? Why no finish on the fret board?

@Diasporaliving Год назад

No offense to anyone meant. Beyond the fun factor and the different look, what are advantages of cigar box guitars? This is not a rhetorical question. Please, feel free to educate me (as long as you do it respectfully and politely). I tried a cigar box guitar once. They are not easy to balance. The sound is O.K., not exactly great. I am probably missing something. I'll be ding-dong if I know what it is! Cheers, Dave. P.S. I follow your creative videos. I've learned a great deal from them. Many thanks!

@blueblur6447 Год назад

Its Dirty, funky and raw.... It cant be understood for its not a scientifically measurable thing.... Its a feeling :)

@badbeardbill9956 6 месяцев назад

Well the fun factor is important. But also it being fewer strings makes it easier in some ways. Usually tuned to an open power chord and sometimes played with a slide. Ultimately it comes down to just being unique and for some it has a good blues vibe and/or a good diy vibe. Ultimately a similar(though not identical effect) could be accomplished with a standard 6 string by just taking off 3 of the strings, keeping A, D, and g. Then drop the A to G. The main difference then is that you don’t get the shorter neck width which may not be desirable - string spacing is probably tighter too. I do think there could be some interesting things done with 3 string solid bodies though…

@badbeardbill9956 6 месяцев назад

Could have fun with guitbasses and bassitars as well

@stevehinton5300 11 месяцев назад

What's more popular, 3 string or 4 string CBG's ..??

@lindaaustin-morin7781 8 месяцев назад

Do you have the neck template for sale?

@dgperforms1 Год назад

Where did you get that fret cutting jig

@homebuiltshop Год назад

Its from Stew Mac.

@andrewgray9663 Год назад

Really nice result. Of course now that we have met your cat Internet law requires that you tell us his/her name.

@scottmorris4914 Год назад

I am looking for a drum sander. and want to make sure it is wide enough to handle an electric body. What is the width you drum sander handles? What make?

@homebuiltshop Год назад

My drum sander is a Supermax 16-32. While it is wide enough for an electric body (just barely) I now wish I'd have gotten the 19-36. I feel that size would work much better. I will likely upgrade mine to that size.

@scottmorris4914 Год назад

@@homebuiltshop Thanks. If the 16-32 will work, I am going with that. The next size up is a bit of an increase in cost. But it looks like it will handle an acoustic back/front.

@patrickufkes Год назад

Do you sell these guitars?

@andyfarmer759 Год назад

Come on Jeff build a lefty and give us a good demo. Even upside down that sounds good.

@normanacree1635 3 месяца назад

Doesn't you template start to look a little small after all abuse it takes while shaping the parts being built?

@jamesdecay13 7 месяцев назад

Whats tuning for this??

@homebuiltshop 7 месяцев назад

I have this tuned to open G. They are great for about any open tuning.

@janeeb859 10 месяцев назад

Most of us don't have fancy tools and aa full workshop

@1980JPA 10 месяцев назад

I guarantee you can do this project with just a few hand tools. A hand saw, chisel, razor knife, cheap drill and maybe a couple other things you can find in your garage or in the junk bin at your local pawn shop. Your guitar doesn't even have to have a perfect radius on the neck. Just make what you can. Not having "fancy tools" is no excuse with this project. Stop making excuses for not creating something. That same motivation to "make it happen" can have you owning a few power tools in no time.