Building a Copper J-Pole Antenna For VHF or CB.

Подписаться 43 тыс.

Просмотров 12 тыс.

50% 1

After building a copper-tube J-Pole (and a Slim-Jim) for 2m, I decided to make one for 6m FM. I had made one using ladder line, but this one will be stand-alone and in two parts using a foldable military antenna. This way the antenna can fit in my truck to be used for portable operations. It can be scaled up for CB or up to 10m probably, though that would make it more of a base antenna than portable. I tested it with my Racal VRM-5080 at the beach..
Feed box on Thingiverse: www.thingiverse.com/thing:595...
Protect your electronics with EMP Shield: www.empshield.com?coupon=radioprepper
Shop for radios: radioddity.refr.cc/gilgruson
Buy me a coffee at ko-fi.com/gilgsn
Shirts and mugs: teespring.com/stores/radio-pr...
Help this channel: / radioprepper
Facebook: / radiopreppers
Radio Preppers Forum: radiopreppers.com
Subscribe on my alternate platform:
odysee.com/@RadioPrepper:d
Keybase: keybase.io/team/radiopreppers
Help this channel by donating crypto:
BTC : bc1qc5jq4dxt7359sh80lkv9v8rlsgnh322hmn6xyc
DASH : XwiFaR1d6F9PGfC7Qqq6ARWbv8auDa7qM1
ETH : 0xe7cC2e415E0D2d1De91604B2b693f124dfBCf9B8
DOGE : D6ha2Ax7UhmtEMPC4fsaEJPxHrLSu3BwYW
XRP : r93TuQrkEq3X9UDkqXKYWaTkteB2ap4hMq
LTC : LYwDy55mZSeb1Czx6JUiTS5YkqjfmWKK5H
SOL : Ee9iJx6ouBih1beozjWrwYBQA9tQgr4nYwosZYsjfxaj
AMP : 0xe7cC2e415E0D2d1De91604B2b693f124dfBCf9B8
HNT : 13REusLAhArRpKGgMxYJKzm2vuFsaihstwqYmvTZ94SMkyXHxQh
TON : EQDpf64gb2kI8nqRtG3AgcquFpciz4aMIm4q38jjkM6n5fY_
QNT : 0xe7cC2e415E0D2d1De91604B2b693f124dfBCf9B8
XLM : GCW6RHWXXBADDPXG7LHNRPSYRFCATO6FD6J224GUWDPGOBB5ZU2ZF5MM
HBAR: 0.0.1786814
LINK: 0xe7cC2e415E0D2d1De91604B2b693f124dfBCf9B8
Get into crypto currencies:
coinbase.com/join/52E4A32BF9E...
Never leave more money than you can afford to lose on an exchange!
DISCLAIMER: The Radio Prepper logo (depicting a microphone) is indeed inspired from a famous flag created in 1775. It is NOTHING BUT a symbol of freedom and independence. It does NOT imply support to any political group. It does NOT imply, represent nor support any ideology with an intent on harming anyone. Freedom means freedom from persecution based on any human trait or belief such as, non exhaustively, race, gender, religion, sexual orientation or nationality. The Radio Prepper channel is a technology and science channel with a focus on preparedness and use of radio technology for disaster relief and small group communications in times of need. It is apolitical and open to anyone sharing the same interests.

Наука

Опубликовано:

7 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@Ron-xn4wf Год назад

Apply the heat at the far end of the fitting where the end of the pipe would be . Capillary attraction will pull the solder into the fitting.

@carsQhere Год назад

Random spray painting on the terrace, "...this is why I'm single guys!" - Brilliant :)

@jeromeGrzelak 5 месяцев назад

That is one Sweet Build kg6mn

@jsmith5443 Месяц назад

Put the flame on the fittings. Also to make cleaner joints wipe off the flux where you want no solder to be before soldering.

@Steve-GM0HUU Год назад

👍Thanks for video Gil. J-poles are great antennas. Easy to make, efficient and not much foot print as no counterpoise required.

@dhl5042 6 месяцев назад

Using MAP gas (verses propane/butane) will provide the higher temps to make a better solder joint. When heating the pipe direct the flame on the junction piece (ie the elbow, T, or union). When the junction piece and pipe is hot you can just touch the electrical solder to the edge of the junction and the solder will be sucked in all the way around the pipe. Good Luck, K5DHL.

@chrisherd991 Год назад

Hi Gil, the hottest part of the flame is at the end of the pale blue inner cone of your blow torch. It might make a difference for you.

@RadioPrepper Год назад

Thanks for the tip!

@m7trsradio Год назад

Great work Gil. It's all about trying. Motters M7TRS 73 👍🏽

@THESPORTINGCAMP Год назад

That’s what she says….😂 Hope all is well Gil.

@joelaut12 Год назад

Hi Gil, nice presentation of a J pole for 6 meters, better luck next time out!

@matt.vanderhoff Год назад

Great video and Happy Easter from Pennsylvania USA! 73, Matt N3VAN

@RadioPrepper Год назад

You too!

@n0vty873 9 месяцев назад

I suggest a tubing cutter. If you can not solder that well drill each joint and put a stainless screw in it. The screws do work very well. A scrap piece of composite decking can be drill and split for a spacer.

@IndependentNewsMedia Год назад

Nice video 👍

@RadioMalopolska Год назад

when i was in 2013 in Cannes .. i had QRP 10W on Beach :) .. Log time ago but awesome

@kingdick4508 Год назад

There are many Ham Radio, RU-vid pages on the Internet, yours is much different. Do you like making things and trying new things, and it’s obvious that you like to teach. Teaching and tinkering is very important to any ham radio operator and I really enjoy watching your videos and getting different ideas and a different perspective. Your videos are awesome, thanks for posting them. 73, de NH7TR

@RadioPrepper Год назад

Thank you, indeed I like teaching very much 😀

@aerofart 9 месяцев назад

Solder will flow towards source of heat. Heat the fitting MORE than the pipe, though heating all parts well is important too. Also be sure to use emery cloth to clean parts to be brazed.

@Liberty4Ever Год назад

6:00 - You need a tubing cutter. I enjoyed the TinkerCAD demo with the TLAR (that looks about right) engineering method. I use FreeCAD, and while it's a very capable 3D parametric CAD program, I use it as if it's TinkerCAD.

@hectorpascal Год назад

OK it worked! But when soldering tube that size and length, you REALLY need a hotter/bigger flame - otherwise the mass of the copper just "wicks" the heat away. This is why many plumbers use oxy-acetylene torches! And try to avoid burning your flux - once burned, the organic residue PREVENTS the solder "wetting" the copper, rather than helping it.

@RadioPrepper Год назад

Definitely!

@paoloorange 11 месяцев назад

Gill, can you please tell me more about the handset of your Racal 5080? I can’t find it for mine 😢. Thanks!

@moisejf8331 Год назад

Hi Jil , How are you ? Still in south France ? As you use copper for antennas I can just recommand to use after frequency & impedance adjusments some coating. Something like RS componants ref. 714-462 is ok , many others possible, of course that's why I use aluminum tubes, out of habit.

@InflatedDolphin Год назад

A J-Pole is a great antenna on 11m, but it's long at that low a frequency. Ladderline and a tree or pole, yes, copper tubing....NO. It would weigh too much and be very unweildy.

@Paul_VK3HN Год назад

It's a pity that you don't know another ham with 6m FM gear, you could arrange a sked. Or contact a club and get them to post your 'activation ' time.

@IncognitaLabs Год назад

You can make the equivalent using ladder line or twinlead and using a fiberglass pole to hold it. I have a 65ft pole and a 20 meter j pole even works..

@RadioPrepper Год назад

I did, made a video about it..

@IncognitaLabs Год назад

@@RadioPrepper Cool!

@The411 Год назад

You have some cool military radios man. Very hard to come by. I was thinking about making an 11 meter Jpole, but after seeing your 6 Meter one.... I think the 11 meter one would be a danger to aircraft... I'll need to rethink.

@RadioPrepper Год назад

Try Ebay for the radios.. You have to be patient.

@RobertLeeAtYT Год назад

On that same website you’ll find calculations for ladder line cable version of the same antenna. In the field, hoist it up a tall tree. Alternatively, let it suspend down from a Jackite telescoping fiberglass pole. A fiberglass crappie fishing pole should be solid enough as well.

@RadioPrepper Год назад

Yes, I.made one a while ago...

@skysurferboy Год назад

I think for local contacts on 6m a hill top location rather than the beach would have been more suitable. Iirc the J pole has a fairly low angle of radiation. I've made one with ladder line for 2, 6 and 10/11m. Very inexpensive coupled with a cheap 10m fibreglass fishing pole. Decent contacts into Europe on 6m during the summer using 5 watts.

@RadioPrepper Год назад

Definitely!

@vincei4252 Год назад

There is a tool that is made for cutting tubing. You screw it on at the appropriate location and spin it round the tube advancing its blade until it cuts all the way through. Nice clean accurate square cuts without the sweat of a hacksaw. Plumbers use them.

@RadioPrepper Год назад

Indeed, I know about it, I just don't have one..

@vincei4252 Год назад

@@RadioPrepper No worries. I was suggesting it so next time you go to the hardware store you spend even more :)

@RadioPrepper Год назад

Thanks, I probably will, very useful gizmo..

@hfvhf987 Год назад

I would love to see a 10m J-pole, would be a monster haha

@RadioPrepper Год назад

Don't tempt me LOL.

@rivit90 Год назад

I'll make one with a 10 meter DX commander pole, it's been in my mind for ages

@RobertLeeAtYT Год назад

Ah, try an end fed half wave (EFHW) dipole instead. I built one for 10m (28.4MHz) just this weekend. It’s shorter than the equivalent J pole. The key is to use insulated wire. I used 18AWG copper insulated with silicone material. The velocity factor is 0.7. What this means is that instead of 5m antenna length, it’s only 3.5m tall. I had the wire suspended from a telescoping fiberglass fishing pole. It worked well.

@RadioPrepper Год назад

Oh I have, so.many times!

@Liberty4Ever Год назад

@@RadioPrepper - If you made a 10m J-Pole antenna, you'd be able to talk to other hams... unlike your beloved 6m. 😛 I do know what it's like to have a technical vision of a better world but nobody else will play. I still have a huge coil of 5/8" copper tubing in the basement that I want to use to make a giant 40m mag loop antenna so I can use a solar powered QDX (amplified?) and Raspberry Pi to create a persistent JS8 message server. I figure if enough of us maintained reliable JS8 servers, people would start to use message storing and forwarding, and then maybe JS8Call would get intelligent message routing, similar to email routing on the internet, but without the need for the internet. Actually, WinMail is the ham version of email. What I envision for JS8 is more like the ham version of SMS messaging. That's one of my emcomm goals.

@bennock1017 Год назад

stick to radio, not plumbing. surprised those "soldered" joints were conductive.

@frequencywatchers Год назад

Well, Great Job Overall, But I Guess I Will Need To Make A Video On How To Solder J Pole ANtennas Or Just Copper Pipes That Looks As Profesional As They Can. Yooure Soldering Job Is C- , Im Sorry, But It Is, Otherwise, Everything Is A+

@RadioPrepper Год назад

I have done better for sure!

@Liberty4Ever Год назад

Secrets to plumbing soldering: Clean copper. No oils or oxides. Good flux inside the joint. LOT of heat. Use a bigger torch. It should take ~15 seconds.

@Tech-NO-City 5 месяцев назад

You scorched the copper it had nothing to do with the torch. You didnt sand the connection first.

@user-vq5cp3zl5z 10 месяцев назад

My friend, I need help from your side, can you have your website?

@RadioPrepper 10 месяцев назад

Email gil@radiopreppers.com

@vincenzofidanza2539 Год назад

DID YOU EVER SEE ANY DIFFRENCE IN THE GAIN OR RTX PERFORMANCE OF A J POLE VERSUS A SLIM JIM? W4RNL DID NOT THINK SO SINCE THERE IS NO BIG PHYSICAL SEPARATION BETWEEN THE TWO RADIATING ELEMENTS

@RadioPrepper Год назад

Hard to say as I have not used them at the same time..

@vincenzofidanza2539 Год назад

THE MATCHING SECTION COULD ALSO BE USED HORIZONTALY SINCE DOES NOT RADIATE , MAKING THE ANTENNA SHORTER