Building a homemade tiltrotator Part 1 

Hi! Awesome video and really nice build. The link is for SE9 model. Did you buy this one or SE7? Or are there some options to choose frome? How much was the item and how much shipping? Thanks and best regards

@@Klemen94 Hi I bought the SE7 model, and the engine I bought seperat. I think it is about $700 with skipping now was less when I bought it

@@MiniMachines1 great, thanks. Did you ever manage to get oil for grab/quick hitch through the rotator? Like engcon has it. Or do you just have to be careful, not to rotate too much, to tear the hoses?

@@Klemen94 I'm actually working on part 2 of this video now, there i have the solution to get the oil true 😀👍

@@MiniMachines1 sounds interesting 👌

Ok I will check into that, thanks for the tip. I got a price on an steelwrist for my Terex but it was to expensive for my small hobby business so that's why I found out I could make my own.The rotor part is working great now, so it's just to place the tilt left on top, so during the winter that should be done.

Yes I always miss a vise on it, so I need to figure something out for it.

@@MiniMachines1 a chunk of 4x6 thick wall tubing for the one jaw with a base welded on that slips between your table slats. That does the rough adjusting then the head can be made the same with a couple of big bolts having their nuts welded to the square tube or adapt a deep jaw pipe vise. Removeable and useful.

I started work the gear that I bought from China, I chose this size since it will hold my Terex hanging off it. Than I bought an hydraulic engine for it that was just under what the gear could handle according to the manufacturer, abs it works great now the engine stops with to much resistance and nothing breaks. Yes the one you buy complete is way too expensive, I will probably be able to build this for 1/10 of the price of a new one or cheaper. And only the rotor is a great feature to have so can't wait for the tilt also 😁

Thx will be fun geting the tilt part on also and see if I can make it work. No problem making one for your Bobcat, I ordered it true Alibaba and it's safe pay system, then they dont get your money before you get the gear.

Mini Machines What specifications did you use ....to get the Unit you wanted?

@@charlesjahnke8549 I got an link for it in my other homemade rotator video in the comments 👍

The rotator post was quick a day in the garage and half a day putting up the new aux outlet on the excavator. Guess I need 2 more days to complete it with the tilt part

Yes if I need to get to the bolts that is the down side, but plan is that I never will need to change them out. The 4 in center I can reach true the bottom of the quick coupler.

@@MiniMachines1 What is the thickness of the plate?

@@helipilot7055 It's 10mm

Hi Yes that is one of my projects for the winter 😊 the engcon on the terex is going on the case and than the terex needs the home made one 👍

I am looking forward to👍

He he but we have English in school. Written as "Takk" Happy Christmas

Hei hyggelig du liker dem. Dessverre har jeg ikke tid å produsere men jeg har kontakt med en som har bygget en veldig bra en etter å ha sett videoen min, kan sette deg i kontakt med han. Send meg gjerne en mail du finner email på RU-vid infoen min 👍

Får ikke send deg mail. Finner ikke deg på Fb heller

Hei mener jeg kjøpte den på økonomideler

I put a pinned comment with an link for the factory I used.