BUILDING a "KOBELCO EURO" EXCAVATOR (Track Hoe) - LESU ALL Metal PC360 Kit PT 5 | RC ADVENTURES

Подписаться 3,7 млн

Просмотров 766 тыс.

50% 1

The boys are back and we are building again. There is so much to do and trouble shoot in this little machine.. because the instructions are almost adequate. Let me elaborate. This build is very exciting.. but in classic international instructions.. there are some parts that are not very clear. Now todays video was only 26 minutes long.. but it took us 8 hours to film.. as one of the issues we ran into was the flow of the hydraulic oil. It seemed as there was too much pressure the entire time. We tried to figure it out for hours.. we could not find any where in the instruction on how to adjust oil pressure. Well.. after the boys left.. I found it. There was a pin that needed to be added to the actual pump. This pin was located below the feeder tube from the hydraulic tank.. and BEHIND A SCREW that needed to be removed.
Then, by adding the adjuster, we could adjust the pressure. BUT.. there was also another problem that plagued what we were doing. The hydraulic valves are SO SENSITIVE.. that you need to adjust servo throw end points. If the servo moves too much.. it starts to open the valve and then partially close it again! BAH! This was a nightmare.. and took us HOURS to figure out.
Now..its a matter of playing with the controls to smooth everything out.. But as I film these videos on Saturday, and upload them for Sunday morning.. I did not have enough time to make it finessed. I will do that later this week.
For those that are wondering, this is a kit that I unboxed on my channel a few weeks ago... Here is the link to the original video: • I'M BUILDING an EXCAVA...
For more information about LESU products visit their Facebook page here: / lesurcchina
Here is the distributor I use in the USA: / semijoesrctruckshop
SUBSCRiBE & “Ring the Bell" ► bit.ly/JOovvU
"1 Million Views Club": bit.ly/2AYVrAF
RCSPARKS Shirts & MERCH: shop.spreadshi...
RC ADVENTURES™/ RCSparks Studio™ © 2019 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Medic Media Productions Inc.

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 541

@speedysteedy759 5 лет назад

The trouble shooting can be the most frustrating but rewarding part of building/fixing/modifying RC. Great job on the build and the friendship on display.

@robbrcnstuff4220 5 лет назад

The mirrors are important so that the operator can make sure their hair looks awesome during the work day. Can't wait to see the finished build.

@mauricioiii3153 5 лет назад

And so guys like joe can look at there gold teeth

@เอกอุบล-ซ5ษ 4 года назад

Rob B rc n stuff

@TheRealRCSparks 5 лет назад

LOT's OF INFO in the video description box. This build video took us 10 hours to film.. and only 25 minutes to post. There are lots of little things not covered in the instructions.. but I hope this video, and description helps those who are also working on this project!

@oldmanbluntz 5 лет назад

Thanks for showing us this awesome build of this awesome machine.

@JimmyB55 5 лет назад

Your dog at the end sleeping upside down jumps when you get it running at the end. Lol great shop buddy

@TheRealRCSparks 5 лет назад

She knows she's safe and loved.. so she has all the trust in the world :)

@JimmyB55 5 лет назад

@@TheRealRCSparks 👍 I figured as much!

@jamesglenn2006 5 лет назад

Lol, your dog on the sofa had me laughing at the end. Glad you found the adjustment screw, things are better now. Such a minty machine 👍🍻

@Evan_Moore61 5 лет назад

James Glenn I was looking at her thinking “what is on the couch?” Then it hit me.

@noahmielke2148 4 года назад

Nice dog 🐕. Your dog most be thinking what are they doing just playing around.

@dirtdevilrcmotorsports 5 лет назад

I loved raven in the background at the end of the video, Not a care in the world. Another awesome and entertaining show. great work guys.

@TheRealRCSparks 5 лет назад

She is a very loved Pup :)

@1breematt 5 лет назад

Fantastic !! Btw The pump is a positive displacement type (used on all hydraulic plant systems and others) So what it gets its got to shift (oil) hence the need for a relief valve to stop a motor or other components(hoses,pipes etc) breaking Also return line is smaller then the suction line on most hydraulic systems as the pump via the valve block or relief will "push" the fluid back to tank . The pump is great for pushing but does not suck that well hence the need for a bigger line in (suction)

@freedomring4813 5 лет назад

I've run trackhoes for years many times just loading one truck after another, off road and on road trucks. But at 59 I was running a 470 Hitachi and after 3 months I quit , I wanted to put a bullet in my head out of boredom....LOL...as soon as I started thinking about it in the morning I would start to go insane the money was great but the thrill of running heavy equipment finally wore off. Nice Toys .

@jamesmaroon6161 5 лет назад

Mr. RCSparks. Really like the job you guys did on that excavator. Really like that gun metal color. that really set it off. Have a great week.

@JHess720 5 лет назад

I love your never quit attitude with whatever comes your way!

@jamesmoore3346 4 года назад

WOW, simply amazing! I did not know anything like this even existed. I can only imagine thrir expensive. I was an industrial hydraulics technician for a large part of my life, built machinary for the offshore oil&gas industry. Yep, big, heavy machines. Before I started that I was a tractor and equipment mechanic for 16 years. The attention to detail is uncanny. I've worked on this machines real counterpart. Would love to get my hands on one, kit form only and build it. What a trip that would be. No time soon though as I'm still recovering from lung cancer, beat the cancer but the chemo and radiation beat the hell out of me. Im doing OK, concidering I was given 'about 90 days', hell, its been 5yrs3mths when they said 'CANCER' for the first time. You guys got this under control, theres always adjustments and testing, ya'll look like ya know what your doing. Just for the heck of it Im gonna do a bit of research and find out it theres one in my future. They wont let me work, body is too beat up. I do have a small wood craft shop out back where I spend most of my time, I do pertty decent at craft shows. Love wood working but theres oil in my veins, what can I say.....lol

@satorrotas 5 лет назад

Great job, really a very nice shovel. You have to be patient to find the problems, and you have found !! Problem solved, good work and great test !!

@RudeBoyzRC 5 лет назад

So angry at real life that I missed this Thanks for the beers in my honour!!!!

@oldmanbluntz 5 лет назад

We always miss you when you're not in the vids.

@Slikx666 5 лет назад

Hi Joe, you were there in beer.

@joejohnson-feeney3410 5 лет назад

Hey joe was wondering if you still did custom rc trailers. I'm in the market for a couple.

@rocawjayz6fd20012 5 лет назад

You were misses crazy joe!

@optimusdude 5 лет назад

We missed you too KJ

@RydeerX02 5 лет назад

i just love how your dog was in the background in the last few seconds of the vid crashed out on the couch! Great build!!

@danhoangvan2029 4 года назад

em thích Quá luôn

@krazy4baja 5 лет назад

Build was going so smooth there was bond to be a few issues to solve. Looks great. I hope you can contact the company and get your mirrors replaced with right ones

@autohaulerbuckley5167 5 лет назад

Another great build episode guys!!! Wonder how the designers didnt figure out the hydraulic line length problem like you did and not fix it in the manual? Great find and letting those following the build know. As a mechanic, please make sure all your cylinders are collapsed when checking your hydraulic fluid level. The rams need to be all the way in to get your full level otherwise you will have a hydraulic spill on the work site from overflowing the tank. Glad you figured out the pressure screw that was in the wrong spot and added it to the end of the video. I spotted it on the tank but waited till the end to see if you guys figured it out.

@ratlme 5 лет назад

What a Machine. Heck of a catch to find the valve and not quit. It sometimes does take a moment to step back and just look. Found that out the hard way myself. Still is AWESOME. But, that Kevin guy looks a lot like "Jim" from You Tube Gold!!! LOL Great show as always.

@AngryDavesADULTRC 5 лет назад

It's coming along great. A rig that complicated is bound to need some shake down. Keep at it boys. -"Angry" Dave

@Stickies72 5 лет назад

The dog at the end on the couch is perfect, all sprawled out. Great job on finding the pressure relief, a good lesson in persistence. 👍👍👍

@rogerchevelle7231 5 лет назад

Such a complex machine..nice building job Boys

@NordicRC 5 лет назад

Wow! Hard work! But it payed of! Good job!

@backyardrcconstruction1058 5 лет назад

Loving the build, mine finally came last week so painting this week! You can assign the tracks to the sliders on the radio then assign a flight mode and mix everything so you can have the tracks on the left stick then switch back and have normal digging functions and the sliders will still operate the tracks when in digging mode. It’s a lot of mixing but it works well when it’s done.

@seanhanley947 5 лет назад

It's always the little details that get overlooked.

@TheRealRCSparks 5 лет назад

That pin was supposed to be installed at the factory. It never shows it bing installed in the book. Its an oversight from the manufacturer. You're right.. its the little things that get overlooked. So much for them to get right...

@STEVOD313 5 лет назад

Wow that is so KEWL! Last week I seen the guys had popcorn for a building snack n this week u got the ruffles chips, nice! IDK why I noticed this LOL

@STEVOD313 5 лет назад

I got the same bottle of loctite from Amazon after I seen ur bottle, ill never run out now, last build I had ran out but not gonna happen again

@pricey4ever330 5 лет назад

Waited all week to see this and it was worth it.

@Thisbajabug 5 лет назад

Awwww the CUTE PUPPY Sleeping.. hehe

@JimmyB55 5 лет назад

Was wondering where I was going to church today. RCSparks studios!

@joejohnson-feeney3410 5 лет назад

Good morning boyz. Thanks for starting my morning off right lol sucks when krazy joe isn't there.

@TheRealRCSparks 5 лет назад

Well, your name is Joe.. so I understand the brotherhood. But Im stoked I had Rookie, Kevin and Sluice drive 45 minutes to entertain us all...

@joejohnson-feeney3410 5 лет назад

Oh most definitely. All the guys are great honestly. Can not wait for loading warz tho.

@MrNosajwhitey 5 лет назад

Can't wait until I see you enjoying the first true work done with this machine

@mitymike 5 лет назад

Everything you guys do is awesome. I like that it takes a team to build an rc excavator just like the real thing. you've captured that well, all the way down to trouble shooting and quality control. 👍👍

@nicholasbarber4193 5 лет назад

A little CA tip, if you are using it on lexan or other clear plastic that can fog white, spray it with some accelerator/kicker and it'll instantly remove the fogging. ;) Another tip many don't know with CA is to keep it in the refrigerator; if you keep it in the refrigerator after it's opened, it'll keep for years without hardening. Edit: I can only vouch for this with Bob Smith Industries (BSI) products. They're the only CA products I've used for years. I would think it would work with other brands as well, though.

@probe81fs 5 лет назад

Amazing Channel Medic and Co.... loving the RU-vid Gold servies. Rear view mirror in the cab can be used with the Rear mirror to check the blind spot directly behind the machine,. Removes the need for a Banksman.

@josepenate7367 5 лет назад

These gentlemankids are my kind of fav friends,wow you fellas are hobby smart ,, ramble on.😊

@Snowtrails11 5 лет назад

Just ran across self centering stick issues myself on a different application. With Spektrum radios at least, there are some adjustment screws inside the radio so if you tighten or loosen, it'll center the stick. Might be a solution for you as well. Only took me six screws to separate my radio

@Jeroen-Engelgeer 5 лет назад

Good detective work. And very nice again.

@jonasgreaser487 5 лет назад

Who could ever thumbs down rc Sparks videos. why???

@ddteamrc6461 5 лет назад

Wow! Great job! On the build guys, that is a really complex set up, I would have had to just walked away so many times during that for the safety of the machine as well as my own. Great perseverance everyone of you! I can't wait to see her digging some dirt maybe you guys have to do a test run😆

@shannonm3841 5 лет назад

not sure how i got here but so glad u found the pressure relief brass doodad at the end.

@brianbarnes350 5 лет назад

Great troubleshooting. What an awesome rig. Please feature it in loading wars some how.

@axelusul 5 лет назад

"Oooh, The Scratch!!!", might be worth putting scale wire protection to hide/protect it around the glass.

@wallyblack186 5 лет назад

really need more you tube gold really enjoy it

@AmericanPiddler 5 лет назад

Of course he did he used MAN HANDS! Thanks for a great episode!

@bakerredrum 5 лет назад

I love those grey plastic wire connectors with the orange levers. I use them too. They work great.

@johnhamilton7124 5 лет назад

Great job! Just like build anything else alot of troubleshooting/fine tuning. Good thing you all have lots of experience .

@EaktasDrawingSchool 5 лет назад

awesome video I like that some people make so complex small machinery thats good👏👏👏👍👍👍

@jamesgruhn-n0dfi647 5 лет назад

Turning into an awesome build. Should be a beast when it’s done.

@kurtguy4336 5 лет назад

Good job guys coming together nicely

@75echo 5 лет назад

I really enjoyed this build guys, again totally awesome and I can’t understand why you guys aren’t on TV yet. Anyway that said , as lovely as this excavator is, I am a bit disappointed with LESU not noticing the wrong mirrors, and a not making a more practical hydraulic system. I hope they fix this in , and number the parts In version 2 .

@rookie101_ 5 лет назад

This kept me up all night !!!!!!

@stellacatfish 5 лет назад

I take it back. The think tank was just thrown under the bus. You did it yourself!!

@MatthewMcMaster 5 лет назад

This looks great can’t wait to see it on RU-vid Gold👍👍👍

@Nickwillfixit 5 лет назад

Loved the way your Collie is laying upside down on the sofa, a sign of a dog relaxed in his enviroment. I just knew you could not leave it alone, I could not have either, it is looking good though, so many pipes to position no wonder there was a few mistakes, now will you wait or will you finish it, I would not be able to wait a week to finish this off.

@krazy4baja 5 лет назад

Glad you found the issue near the end. Was hoping I’d see it run for a few minutes. From your Canadian neighbor province BC

@MrDavalassene 2 года назад

Very nice Model… good Job 👍

@smhincdrkolk3877 2 года назад

At 5:48 into the video you mentioned matching the lines. If you tie a small amount of sewing thread to the line on each side, the color helps you to keep track.

@JacksonGuitarsPlayer03 5 лет назад

Thing looks real cool blue with the brass

@GoatOffroad 5 лет назад

I really like the gun-metal color!! The word “ nipple “ gets thrown around and Steve starts taking off his clothes!! 🤪. Awesome build guys! ❤️🐞

@tracksntreadslou 5 лет назад

Nice work on this one gentlemen ..glad you figured it out ..2 thumbs up

@wessmann 5 лет назад

You guys rock the RC World

@BraxxJuventa 5 лет назад

Great episode again Aaron and friends! 👍😁

@jacobhenson3952 5 лет назад

The dog at the end of the video is awesome laying in the background just chillin 😎

@TheCrakrman 5 лет назад

Your dog in the background at the end is so chilled lol

@TheRealRCSparks 5 лет назад

yeah, she has ultimate trust :)

@huethedev6537 4 месяца назад

I thought about buying a few kits to save money, but after watching this. I'll just pay the extra and let the pros build it.

@michaelmaciejewicz7534 4 года назад

The magic of TV

@channotpoling20 5 лет назад

Looks very complicated. Good job on this build!!!

@timberwolflogging8472 5 лет назад

Sweet excavator is almost done isnt it funny how the smallest parts can screw things up so until next week great video

@ringerdiggsycobbsy6254 5 лет назад

You blokes are legends that's one hell if a mission

@joshualinton7494 5 лет назад

Next time for the windows use Gorilla glue clear grip. Works awesome, no foggy windows. Thanks guys

@leonelcollinlopez4771 5 лет назад

Life is crazy with crazy joe

@nwhuckin7761 5 лет назад

Nice one. She's a beauty

@swhalstead 5 лет назад

No your not a quitter, but I think your dog is done for the day! LOL!

@scoutworks 5 лет назад

I am SO EXCiTED to see this monster breaking ground!!! Also, as a PENALTY! for KJ missing out on this episode, he should have to load a 6 pack of beer into the Volvo rock truck using the new excavator and drive it over to you!

@not_a_therapist 5 лет назад

Awesome! Wish I could afford these things.

@JimmyB55 5 лет назад

Or not eat!

@cmoore7689 5 лет назад

That's the reward of a build, having that what the heck moments, Have another beer boys, you know how would, Keep on keeping on

@jayjeep6178 5 лет назад

Don’t build or own RC vehicles but love the channel and the guys keep up the good work

@chiccorocker 5 лет назад

Oh my god it moves! Amazing. Very complicated to get it working indeed, mechanics and fluid dynamics are not easy matters, but you got it! And of course it was a little piece in the wrong place is the end ;)

@freythedutchie4278 5 лет назад

Bwahahahaha!!!!! I would have made the that mistake..... looking killer dude!!! With all that extra space in the counter weight you could add a sound kit to give it that extra touch. Also, I got Lesu’s fuel tanks for my Knight hauler and accidentally got the hydraulic ones, so I made do and added the lines as “fuel lines” and they weren’t that hard to pop on and I didn’t heat them......but I do have a bit of brute side so that may have helped

@Jeepinwargammer 5 лет назад

I didn't like the blue at first, but that brass makes it pop so nicely

@donalddarbonne779 5 лет назад

Beautiful. Simply beautiful.

@anastaciorolon2210 5 лет назад

Wow it's works.. Good job.....awesome

@Timberwolf35546 5 лет назад

Congratulations Bro on completing a beautiful excavator.

@chawthiamyi2329 5 лет назад

Best RC RU-vid CHANNEL IN THE WORLD

@andyrichey1192 5 лет назад

Awesome, Love the color looks supercool. I knew you'd figure it out. Yeah can't wait to see it in action

@TheRealRCSparks 5 лет назад

Yeah Andy.. just a little more finesse and a different radio system. It will be mint

@edrc1793 5 лет назад

excellent build. can't wait to see it in action!

@joellake26 5 лет назад

In the words of Tim Allen in Galaxy quest “Never give up, Never surrender” Some of the littlest things, get over looked and screws up the whole project lol

@9HighFlyer9 5 лет назад

Enrico Colantoni not Tim Allen. Awesome movie though. My second favorite Alan Rickman movie.

@joellake26 5 лет назад

Not according to “mygeekwisdom.com. Be we arent here to split hairs... galaxy quest was a Star Trek spoof movie.. good movie.

@jamesmoore3346 4 года назад

Joel Lake, "never give up, never surender", I caught that one quick. I adopted that slogan when I found out I had lung cancer and was told I had "about 90 days". Long story short someof the roughest chemo and radiation at the same time I am now cancer free although the I never quite got over the treatments. That was 5yrs 3mhs ago. Not bad for a guy who was given 90 days, lol..... I just ask everyone to please say a short prayer for all who are fighting today......thanks to all

@ronringwald5120 5 лет назад

Excellant troubleshooting

@trailblazeratv6306 5 лет назад

Beers always make it more fun for the adults

@scaniadave8508 5 лет назад

Great job guys

@anjanettehowell9154 5 лет назад

I always look foreword to watching your videos on Sunday keep it up

@CustomCrawlerz 5 лет назад

Great job Boys...

@jordans6146 5 лет назад

the little clear piece you reffered to as the air filter is actually called a pre cleaner and is used in dusty environments to remove large particles before allowing the air into the filter to reduce filter clog

@TheRealRCSparks 5 лет назад

So, an air filter..

@jordans6146 5 лет назад

@@TheRealRCSparks woah i see what you did there i might be a little too baked lol

@pelemlangka 4 года назад

I am impressed with your project. do you think a beginner or newbie who has no background and experience about RC can still build RC excavators like this ?

@froggyhopper1 5 лет назад

Well done.

@eptyr12 5 лет назад

Wago lever nuts are awesome.

@paultro8457 5 лет назад

I know you guys wanted it finished but I'm excited there's gonna be another episode on this bad billy.👍👍👍

@evanjames6473 5 лет назад

Your determination speaks volumes! Good catch! Puppers on the couch for the surprise ending was a hoot! Keep it up! Looking forward to YTG S3!

@mikewarner7058 5 лет назад

I enjoyed this video but i have tosay that the best part of it all is te dog in the back ground it made me laugh when he turned and loked and just laid there nice job to all

@stellacatfish 5 лет назад

The new season's nearing. Better step up your game guys!!!

@RCTruckinAustraliawithJimmy 5 лет назад

Hole on top of the tank may be overflow?.. Maybe 90degree bend with a bit of pipe running down and out the bottom of excavator frame?? Stop hydraulic oil going all over your nice paint job 😃

@TheRealRCSparks 5 лет назад

cant have a 90 there.. because the lid wont close to the tank