Building a Miter AND Radial Arm Saw Station in One! 

I have never identified with a person on RU-vid more thoroughly than I did with you when you got to the "opposing taper" thing.

I feel like the phrase "I got this for free from my last job" needs its own jingle to accompany it.

16:18 RIP Electrical outlet, you died trying to save your best friend, the shelf.

0:20 as many a teacher has told me: Nothing's more permanent than a temporary solution.

As with any of your video creations, you are an excellent entertainer, but also a pretty darn good craftsman. Not only that though, to be honest and to see the humor in your mistakes adds to the entertainment. Thank you, I'm truly looking forward to your upcoming shenanigans.

Ill be honest, I think the stop blocks actually look really cool.

I've used other (10" saws) previously and was pretty surprised with the speed and cutting ability of this Dewalt saw.I have bolted mine to a table to minimize movement which I highly recommend.This is a Great saw ru-vid.comUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe with a light to see your cutting line (not a laser line).I'd recommend this saw fro anyone looking to upgrade from a 10" miter saw.

To be absolutely honest …. Your editing skills are way above the norm …. Great stuff!

I have to say I'm very impressed with this build. The radial arm saw is an INCREDIBLY versatile tool to have in your shop. As the proud owner of 2 of them (1 dedicated to cutting and the other one with a dedicated arbor bit stand) as long as you pay attention to what you're doing and respect the power they have, you can do some pretty incredible things with them.

YT is only now--TWO YEARS after the fact--suggesting this video to me??? I have been cheated! Great videos, great content. Subscribed!

The cuts to the bon fire and homeless drill press were perfect. You are rapidly becoming my favorite channel.

I had to set up a huge woodshop a couple decades ago.. and warehouse floors are never level.. I used a cabinetry trick I built a base on the floor that was about 6 inches high, I started by placing 4x4's flat on the floor every 2 foot.. I painstakingly beveled and trimmed each each one till they were all level to each other & front to back. it took me 3 days my highest point was 2 inches.. when finished I placed plywood over it and built my 30 foot long table on top, I actually had the same setup you are using and for the same reason.. I only used the radial for dado's.. The shop has had more modern tools to replace the older during the years, but the table is still there and never had to be altered.. I love your channel.. Be Blessed and keep up the good work...

Why you don't have hundreds and hundreds of thousands of subscribers is a mystery to me. Your vids are informative, entertaining, humorous and actually contain a fair amount of technical savviness. I enjoy both of your channels and always look forward to their posting. Keep up the good work.

I appreciate that you show mistakes were made along the way. Great job using reclaimed materials. I think you’re cross cut station is going to look outstanding when it’s all complete! Thank you for sharing your trials and tribulations along the way.

Lost it at “ my drill press is homeless “ and it’s just lying on the floor sideways.

18:50 "....faffing around" nice i use that word and everyone looks at me weird, glad someone else uses it

"The temporary setups last the longest" I feel this in my bones.

and here I was wondering to myself "why is he taking so long to put up videos on his main channel" then I discovered *this* This is a gold mine, I am so glad I went to your second channel, I absolutely adore it! Thank you Robert!

My God!. It is so refreshing to see other woodworkers like myself assembling things incorrectly occasionally like I do lol. Mistakes are part of any crafts and I do enjoy your humor with everything!

Really appreciate an honest build video with all the "fixes". The difference between a craftsman and a noob is that everyone makes mistakes ,,, a craftsman know how to "fix it" and the noob has no idea.

please ...never change - always look forward and enjoy your posts

"Bacuse the temporary setups last the longest" True, absolutely true 😅😅😅😅

The quick-shot montages you do would make great backing tracks for a garage workshop band.

“Temporary solutions last the longest” is the greatest T-Shirt slogan I’ve heard in the last…bit of time.

17:00 What the hell is that glorious beast?! EDIT: Found it! Thank you for the link. This would've been SO helpful when my kids were in their Lego phase.

1:47 "well it's impossible bc I don't have enough space" Sir, you have 4 cars in your shop

I love your sense of humor and editing, great job 👍🏻

I don’t do woodworking, but love your approach to problem solving. I am a small run apparel manufacturer and as soon as you put the legs up to show us, I knew what you’d done. Having cut out four pairs of pants with 8 left legs once, I can say this error usually only happens once every ten years or so.

I love your style. We share the same sense of humor, but you have a much better delivery. “Cut a hole in the wall” to keep miter saw cord from rubbing. I was literally thinking that 2 seconds before you said it. :)

I like your sense of humour, several smiles in the video for me. I also like that you bugg3r things up too and keep them in. Looking forward to the next one, thanks.

I always hesitate to watch your woodworking videos but I never regret it afterwards, keep up the good work

I am glad you were on, "Technology Connections." From there I discovered your other channel, "Aging Wheels." I was watching one of the bus episodes and my wife was laying beside me. I begin to say, "You know what would." Before I could even finish my sentence she said, "There is no way we are getting a damn bus!" In my defence, I didn't want a bus. I was imagining a fresh food truck that delivers food and other supplies to campsites would be dope. Keep up the great work and please do more stuff with Alec from TC.

I love how you keep your mistakes in your video. No matter how many years we do this we all still make mistakes sometimes and it makes it more real to keep them in and make a joke of it.

The smiley face on the dust collector bag, brilliant!!!!!!!!

My favorite (among many really good ones) was "...that's a dog bed..." I built a box (frame?) for my table saw so thanks for that video too; now I'm going to build my miter saw station. Great production values, pacing, and wry comments....you really set yourself apart from the rest!

17:08 That´s a big Roomba

I love the fact that you don't hide or edit out your mistakes. I can really relate to that. I have a lot of "Doh!" moments as well. Keep up the good work.

Cool Cars - best is the Trabant - i learned driving with one of this, 30 year ago - i like it this plastic cars and your Videos too. Greetings from Germany

Great Job I Believe You The Only One With A Mitter Box And Radio Arm Saw...

My man, so refreshing to see someone admit and even showcase their mistakes. Subscribed!

So watching full build videos is almost therapeutic. I just put them on and go to work at my desk . NOT YOUR VIDEOS!! Its full on entertainment. Its like Fat Albert fun and educational "dude you kill me" Subscriber for life!!

If you don't slow down with all of these projects, you'll run out of things to improve. Procrastinate now so you have something to do for later!

The editing of the fire was gold. As gold as the hammer.

I love that you leave in your mistakes. Keeping it real.

The sounds of the stop motion (jump motion?) are almost musical in an #asmr sort of way. Especially the segment when you were using the hand saw.

I’m enjoying your honesty with the mishaps. It’s good to see other people make mistakes too!

I have been a woodworker and finish carpenter for over 30 years, teaching for 20+ and watching the rise of DIY videos on the internet since there was only 5 of them. Half the time I want to run up to him and urge him to hold the piece in a slightly safer way or maybe not run his push block right up to the blade but his humility and sense of humor make his videos some of the best. Including all the mistakes and how to fix them makes his videos so much more valuable.. If everyone had that approach we would all have a better journey.

I do not know where you've been my entire youtube-viewing career, but you have restored my faith in humanity. I even skipped a new oxtoolco to watch this... Yowza! Love your stuff.

Just come across this and immediately I am in stitches. A Reliant 3 wheeler with the number plate BOLLOCKS....brilliant

The project is amazingly shown. The humor, it's great, too. Laughing

nice to see someone beside me see the value of a RAS

Love your content. Especially where you admit that there were woopsies and its not perfect everytime. Just like a more normal person. You are a great entertainer, thanks

Thank you for the funniest 25:39 minutes I have watched in years! I am a 57 year old female woodworker, I love watching and learning from other people"s projects. You sir are absolutely fabulous! Why? Because we all make mistakes and it is nice to see you make some too with humor! Plus you remind me of my youngest son, and yup he is brilliantly funny too! Keep doing what your doing! I had tears running down my face from laughing! Bless you young man and find that drill press a new home! LOL!!!!!

How fortunate to have found this. I am going to build one of these in a month or two. Now I have a good example to follow.

Several years ago on New Yankee Workshop, I watch Norman Abrams build a cabinet very much like yours is the only time I'd seen a chop saw and a radial arm saw on the same cabinet and used for the exact same purpose you're talking about. Ever since then I've thought about building one and just never have perhaps now's the time thank you for reminding me of it

One of the most entreating and informative videos. I love that you did not delete your mistakes like others do. We all make them. This set up is exactly what I am doing.

Ah, the classic arm chopper and disemboweler combo. Any proper shop should have one.

I feel radial arm saws are underappreciated these days, they are pretty versatile for all the reasons you mentioned. If you've got the space for one, it's a great addition to the shop.

Funny, makes viewers entertained as we get ideas for our projects

Not too many woodworkers have an extensive Renault collection! Even the famed "Robin"!

I just recently bought a new home with a 32x86 barn and discovered I had an area where I wanted to combine my miter saw and RAS in one bench. This is exactly what I was thinking in my head. Thanks for the entertaining videos.

Hilarious. It's nice to see a craftsman who not only makes mistakes (we're all human!), but also acknowledges them and can laugh about them. Keep up the great work! P.S. I love the way you edit the video with the rapid-fire cutting/nailing/drilling montages!

First video of yours that I've watched. I'd come back just for the humor alone! LOL! Love it!

I really like the idea of having a radial arm saw dedicated solely for dados. It’s always a mild pain in the ass changing out the blade on the table saw, so I might just steal your idea here.

Your stop motion time lapse things are extremely satisfying to me.

This is the first Under Dunn video I've seen. UD: "Ow! What am I, Old?" Me: "I identify with this guy." SUBSCRIBED

Finally someone else that did the same thing and set up a miter saw and radial arm saw on the same bench WITH THE BENCH OVER THE RADIAL ARM SAW.

Ahhh... What am I old? 😄 Classic! Yep, we're all getting there. Good video.

I have zero clue about what you're doing and why, but it is sooooo satisfying to watch!

“The temporary setups last the longest!” Rarely have truer words ever been said b

I love your videos and your personality.

Dude,I'm loving your vids. The screw ups and self deprecation is refreshing with so many "master woodworkers" on RU-vid pretending they never mess up.

I haven't even watched this yet, but my day is better knowing you dropped some new content. Thanks!

Save the drill press!

I've inherited a Craftsman Radial Arm Saw from my grandfather (which is most definitely older than me) this will be perfect for the Miter Saw station I want to put together!

I call dibs on "Voracious Midnight Hammering" for my next album.

I like your wing it as you go design method!

16:48 is still one of the best Dunn comedic moments of all time.

My mitre saw (which I bought for my dad 30 years ago for him to do some flooring with, and then he gave it back about 5 years before he died) sits on a workbench that my dad and I built when I was 13. The top is red oak, made from joined 2 x 4s. Heavy as anything but solid. It's a pain to move, but I cannot bear to part with it. I'm turning 60 tomorrow, and it has been a part of my life for a very long time...

Love your style of editing. Saves us viewers a lot of fast-forward time.

Love the registration plate on the Robin..... happy 90k

Love your humor and love that you leave your mistakes/mishaps in your videos (and even highlight them) to make sure we don’t make the same mistakes.. you earned my sub! 👌🏽

Loved the video, but I gotta say....it was the sarcastic commentary during the shelf destruction that made me smash the subscription button 🤣 👍🏼

This is the first video of yours that I have watched. I love the sarcasm, as well as the ability to make fun of and overcome flaws that were created by the equipment that cannot duplicate whats in your mind. It reminds me of many of my own projects, to a much larger scale...and not quite as many "fails".

Hi. Very fun to see the way you edit. Have not seen anything like this before. Except on your channel. Very good! AND you are very skilled!

You know it gonna be a good day in the shop, when you bring up RU-vid for background noise and there's new content. From either channel. 😌🤙

Just discovered your channel. Excellent work sir. Really appreciate the sarcastic humor!

trusted that single clamp to save you from some wicked frisbee kickback

Glad that I'm not the only dork with time on my hands!

The humor .... 😍 Made my day!

new favourite funny woodwork channel.

I love your delivery. " this would be a lot easier if I had the thing I'm building"

My favourite new woodworker ,it was like watching my self . " I may just cut a hole in the wall later " LOL

I really enjoy your presentation style. You're a very funny and charming dude. All the best!

“The temporary setups last the longest.” Amen, brother!

Most likable guy on RU-vid.

Really grown to appreciate your humor. Great stuff!

Just found your channel, and can't quite decide which is drier, the sawdust in your shop, or your sense of humor. LOVE the silliness, and also the projects! Keep it up, new subscriber here!

That tapered leg fail earnd you a like for me! It is so good (and fun) to see that someone that admits thier misstakes :)

Turned out really nice! It’s nice to see you using thinner ply, etc. and especially dados!!! Looks super clean and I can wait to see your take on dust collection and then drawers and organization