Hey now, you're giving people some good ideas here! lol I think projects on a budget are so much more rewarding because they instill more ingenuity and attention to materials.
And good ideas are free. This man just keeps thinking of solutions outside of the box. His work is great and the recycling is commendable but his craftiness..... Unmatched. Those hinges! So clever. I would have scrounged around for brass and delrin for weeks to finish it
that is so incredibly clever! My sound card wasn't working on my PC so i watched this with no audio and I still totally got it. Every step I was wondering, " how's he gonna get past this " and every time he came up with a simple but effective method of making it work. This is something that needs to be taught to our kids today; how to repurpose materials rather than commit them to a landfill. Eventually there won't be any more land to fill...
It’s good to see that those of us that haven’t got an elaborate workshop or extra deep pockets can make something that we can get on the water and do a bit of fishing with for a couple of hours . Thanks for the hints I enjoyed the Video👍
You can save that crystallized epoxy. Just heat the two parts. Put the resin and hardener (plastic jugs work better, but the metal cans will work too) in a shallow pan of steaming (not boiling) water. Leave it for an hour or until the crystals have melted and you are good to go. You have recovered that epoxy and it is as good as new.
I'll note that what he has there IS NOT EPOXY. It's polyester resin. Totally different chemistry than epoxy. Polyester resins are crappier in most respects, but they're much cheaper than equivalent volumes of epoxy. The pre-polymer in the big can is made from styrene resin and (as I recall) propylene glycol, which forms a polyester that isn't fully cross-linked. The hardener is a catalyst that is typically either benzoyl peroxide or methyl-ethyl ketone peroxide--it triggers the cross-linking reaction, which as we saw here, can happen spontaneously over long time periods...
its much easier if you put the resin on the boat, then lay your dry strip of cloth on it, then press it in and if necessary add a little more resin to wet it out.. Then you can take some saran wrap to put it over and press it down to get any bubbles out and make a nice smooth surface. Later after it sets up you can remove the saran wrap
Just in case you were curious, the propeller is off of a 1940's or early 50's Gale 1.5-5hp outboard. Gale was a division of OMC (Johnson/Evinrude) and sold their motors under different names for department stores.
They also owned Lawnboy at one point. Which is why I'm planning on mounting one to a ESKA 5 lower Unit. What makes it even cooler is the mower is electric start.
I’d majorly question the business you bought the fibreglass from. It should NEVER BE FOLDED. It should always come on a roll no matter the quantity you purchase. Thanks for the awesome video. I’m just about to restore my fathers canoe. I’m 42 and remember the awesome times we had as kids in the creeks and dams, whether fishing or just mucking around🍻🍻
Pipe bending hack. If you want a neater pipe bend with less hassle, fill your shaft with sand and plug the ends. Holds its shape while you bend it like a solid bar with a flexible core.
I have no idea why your videos are being recommended to me now. But you seem to have all the same interests as I do. I've been boating ALL my life, even before I got my permit at age 12. (Kids under 16 without a permit can operate a motor boat as long as an adult present.)
@@saveitforparts You could do an episode on registering that thing. It seems many RU-vidrs never go that far. Look up the guy that crossed the English channel in a bathtub. Lol
next time you put some glass on something, keep the brush in one hand, use it like you did to put the resin on the matting then use it to work the air out from underneath the glass when you apply it. that keeps one hand clean to scratch you nose or do whatever you need a clean hand for. and before you touch anything rub talcum powder liberally on your hands and forearms, it gets in your pores and doesn't let the glass fibers stick in you, you'll be glad you did when the itching doesn't go on for days. cool project mate
I can say from experience you'll quickly burn out the centrifugal clutch as it's made for air and not water. Simple solution is to either stretch or change the spring on the clutch to less tension. You're welcome.
You are supposed to completely soak the 'glass cloth with the resin. That the cloth was still white and not completely translucent is proof that it will be very, very weak after curing. "and that's how you take a pile of garbage and turn it into a yellow pile of garbage". Well done, my man. While I'd never get in that thing, you look like you had fun with it.
Whether you're done this before or it's your first attempt! - Martins boat plans will help you decide which shed project is best suited for you, how to execute it and bring professional results every time. Visit => t.co/uM8hFDqZOp
To me, the obvious fix would have been cutting off last 18" of that boogered stern and put a flat transom in there. Good rudder mount, and easily 'glassed into the existing hull. Just me, though.
I used to have one of those! I also have a couple videos about it. I ended up selling it since it was pretty heavy, I'm planning to build a better one soon!
The way a lot of guys do it is to mount the motor on a stand so it will swivel sideways and up and down . They don't use a rudder the motor is the rudder you point the prop and the boat goes in the other direction , simple/
I love the name! Here is another option. How about the wave wacker? I’ve been toying with a similar idea for my kayak, but I want it to be electric so that it is more quiet.
Some more torque or smaller prop would probably have helped this one! I bet electric would have the torque needed, or you could get a geared-down electric motor like the one I'm using on my rail cart thing.
I just found something in my feed called KKK long shaft propeller- Mini version 1.0. It seems to be a long tail style motor boat mount for a kayak. It looks like a company from Thailand (where this propulsion system is popular) that produces this kit. If you look for it on RU-vid, it should come up. I didn’t see anyone wearing white robes in the video, so no worries there. This could be easily made from homemade stuff. It seems to go pretty fast!
channel lock pliers go the other way the solid "hook" always pulls , the moveable jaw pushes , adjustable wrenches (thumb wrench) work the same way. Vise grips too.
Yep, in my mind I was yelling “turn your pliers over!” Slippage, weak hold, boogered nuts and bolts, all avoided by using adjustable tools the right way instead of bass-ackwards. We live and learn as long as we live through it... at least he’s willing to get in there and get things done. 👍
Very cool! I tried my hand at doing a bit of fiber-glassing about 35 years ago. I picked up a used Honda 750 with fering and lowers. I wanted to mount an AM/FM/Cassette player on the fering, so I decided to build on. I purchased a fiberglass body repair kit and grabbed some old window screen I had in the garage. Used the screen to hold the glass, and built a nice little frame with speaker grills on the side. It turned out fairly nice. Painted it black to match my rig and away we went! About three years later, I blew out my back and could no longer ride, so a junk man offered to trade an old Dodge Van for the bike. I took him up on it. Six months later, I responded to a motorcycle accident, his kid had my old Honda and left the highway at 60 plus. About the only thing not busted to hell was that fiberglass radio cover. Kid came out of it about a month later and seems OK well he did when I left the area in 93.
Hi, my name is saveitforparts, and I'm a Boat builder and a Sailor and I'm on a mission to rebuild and restore this 111 year old classic canoe called torn-up hoe.
This is that Neighbor that you see collecting a ton of Garbage in his yard for years and years and it just sits there and then when he dies his poor grand children have to spend days cleaning the garbage out.
TRX VLOGGER yes you’re not wrong I know all about that. I’ve been one of those hoarders and my girlfriend has helped me to improve my life. I currently have a backyard shed that needs clearing out. Too much “useful” stuff quickly becomes “useless” when you’re too lazy or time poor or couldn’t be bothered. At my previous house I had many “useful” bits and pieces of all sorts of things. How embarrassing that was when I had to clear it all prior to selling that house. My advice, get professional help. When my girlfriend and I can afford it I’m happy to go get professional help like hypnotherapy to alter my mind so I don’t hoard anything anymore.
Dumbster Fire looks like a speed demon. I hope you don’t burn up your weed wacker shaft first trip out when that propeller meets the water and the propeller has to compete against the viscosity of the water. Heh, heh, maybe it’ll work. Good luck. Texas
I rebuilt the transom on a little AquaLark boat 10 years ago. Come out great. I never made a video. I really had no idea what I was doing. I'm thinking of building a motor for it.
It's not sealed at all, I just put the motor up above the water line. That way the water doesn't get high enough to come into the boat. It's the cheap and dirty way to do a prop shaft!
If it has a motor you have to register it. I like to see the expression on their face at the court house, when you tell them what kind of horse power you have!!
I once registered a raft made out of barrels and plywood, I made sure to show them a picture for extra laughs. It was 16' long, they suggested we cut it in half to meet the 8' maximum for unregistered boats!
@@saveitforparts Hi. Neat project. I've been wondering for years if any weed wacker had enough power to do what you attempted. Do you have any idea what the size of your weed wacker engine is?