Building a NEW Commodore 1581 disk drive!

Подписаться 24 тыс.

Просмотров 76 тыс.

50% 1

Ep 49 : Everything you need to build your own Commodore 1581 3.5” drive from new parts using a reproduction logic board.
Channel Membership: ru-vid.comjoin
Patreon: / retrobits
Amazon: www.amazon.com/shop/retrobits
Twitter: / retrobitstv
Hakko FX888D Digital Soldering Station - amzn.to/2TYYrbI
Hakko FR301 Desoldering Tool - amzn.to/3cP8VR3
Hakko-CHP-170 Micro Cutter - amzn.to/3mT3btH
Velleman Circuit Board Clamping Kit - amzn.to/2Z2ZdqG
Weller SM1 Solder Dispenser - amzn.to/3lFVXtC
Creality CR6-SE 3D Printer - amzn.to/30OOmkQ
*Retro Bits earns money from Amazon and eBay Partner Links
Replica 1581 Project Page - tinyurl.com/bdhhwtvd
PC Drive Adaptor - gitlab.com/toms01/1581-pc-dri...
AmiBay Sale Thread - www.amibay.com/forum/want-to-...
3D Printed Case - tinyurl.com/bdh4kyef
8-Bit Show and Tell Sales Estimation - • How Many Commodore 158...
00:00 Introduction
00:24 The Commodore 1581
01:42 What You’ll Need
08:52 A Soldering Montage (aka Upping My Game)
14:03 Assembly and Testing
24:00 Cost Analysis
27:03 Conclusion

Наука

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 315

@retrobitstv 5 месяцев назад

My follow-up video on how to convert a PC drive for use without an adapter and issues you should consider before purchasing an 'enhanced' replica PCB for your own 1581 build project: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--mKsMX0BG1Y.html

@The8BitGuy 2 года назад

Great job on the build and the video! The 1581 is also my favorite Commodore drive. I've thought about building one of these replicas before, but was afraid I'd spend as much as an original drive. Your price estimates at the end more or less confirm that.

@retrodiydotorg223 2 года назад

Original parts / devices get more and more expensive. In a year or two this replica will be a bargain compared to the original drive price.

@francoisleveille409 2 года назад

Don't forget Simon Owen's SAMDisk. With this PC application and a 1581 drive, it becomes incredibly easy and quick to transfer large amounts of data between a PC and any Commodore 8 bit computers. No need for SD2IEC or any special hardware.

@jamesc2327 Месяц назад

@@francoisleveille409What is this?

@8_Bit 2 года назад

Great job. Like you said, it's amazing what can be done nowadays between 3d printers and small-run PCB manufacturing. And it's funny how "crazy eBay prices" actually seem fairly reasonable when you look at trying to build it yourself, especially when factoring in the shipping costs and all the work.

@retrobitstv 2 года назад

Thanks! Yea, when I stop and think about it, the tools we have access to today really are amazing. At an inflation-adjusted $900 MSRP, they haven't yet crossed that threshold of appreciation where they're more expensive now. Not that they were sold for the full $400 for long... I guess my takeaway is that one should build this project for the sake of building the project, not specifically for cost savings (unless you're the corner case that has most of the parts on-hand already).

@johnbos4637 2 года назад

@8-Bit Show And Tell It actually costs about $80 (total) to build a 1581 board and the drive can be sourced from an Amiga 500. I reversed the 1581 and built 10 several years ago.

@timmooney7528 2 года назад

As stated already, this is a great time for retro computing. Projects like this are great demonstrations of what can be done with new and re-purposed hardware

@LeftoverBeefcake 2 года назад

Thank you for this video! With the shocking prices of 1581 drives on eBay (and prices are only going to continue going up), it's a comfort to know that an existing drive can be refurbished. As long as the needed chips and things are readily available, that is. :)

2 года назад

This video shows many cool things which is great in our modern era: community designed/built electronics, home 3D printing, retro computing still going strong, and talented content creators covering stuff which otherwise would never make into a TV documentary. There's so much bad going on in the world right now, but it would be dumb not to value the good things sometimes. Thanks for this!

@retrobitstv 2 года назад

Thank you for your comments! The retro community really is a great place with great people making interesting things and I'm really glad to be a part of it.

@BertGrink 2 года назад

Well put, István!

@MegaManNeo 2 года назад

RU-vid is actually the place where I learned about the 1581 to begin with. Honestly, I like its looks and how it fits the C64-C/C128-C and how fast it really is when paired with JiffyDOS compared to a stock 1541.

@75slaine 2 года назад

Fantastic video Matt, thanks for making this video. As mentioned on Twitter this has been on my radar for a while now but I’ve never put the effort in to figure out everything. Great that you’ve done that for all for us. 🙌

@devMashcom 2 года назад

I’ve been lusting after a 1581 for years. This might be a really fun build! Great vid!

@SuperVstech 2 года назад

Great details on the build! I’m lucky, I have two 1581’s but cool to know this is an option for replacements.

@CrazySpence 2 года назад

I've always wanted one of these back in the day and this is pretty cool but other than as a novelty I still can't justify it. The video was very enjoyable to watch and I'm glad there continues to be alternatives to recreate or keep these things going.

@HiruS22 2 года назад

Just discovered your channel via this and it’s full of everything that encompassed my early days in computing. Subscribed and looking forward to bingeing your previous videos 👍

@retrobitstv 2 года назад

Welcome and I hope you enjoy what you find!

@Super_Bros. 2 года назад

Great video; I am very glad to have found your channel!

@doktor6495 2 года назад

All I can say is that I'm a little jealous. :) VERY NICE BUILT! Greetings, Doc64!

@retrobitstv 2 года назад

Thanks!

@Nas_Atlas 2 года назад

What a time to be a retro geek. Such an entertaining video. Building or owning one of these drives is definitely on my bucket list.

@retrobitstv 2 года назад

It really is. There are so many great projects to choose from and new stuff coming out all the time!

@shaunhall960 Год назад

I recall buying it back in the day for around 300. I found it worth the price. Now we can get it for an amazing price! What a great time to get back into the hobby.

@FullMetalFab Год назад

I find it hilarious that I pull up this video to find all the resources to build myself a 1581 only to have pull the same Samsung SFD-321B drive out of a box of parts 5 min before hand. Time for some clear PETG to go in the printer, got to make the 1581 match my clean C64C case :P

@jamesg872 Год назад

This is a quality video, hope you continue the channel.

@MoreFunMakingIt 2 года назад

Great video! I'll be honest, Im unlikely to ever want to build one of these, but I very much enjoyed watching you build one. And well done for leaving the mistakes in, always a sign of a good channel.

@retrobitstv 2 года назад

Thanks, glad you enjoyed it! I hope that others can learn from my mistakes and avoid making the same ones :)

@caeserromero3013 2 года назад

This is why Europe was almost exclusively cassette based for C64 software. In 1987 you could buy a C64 for half the cost of a floppy drive. And even if you found the cash spare to buy one, most stores didn't sell disk versions of games...

@retrobitstv 2 года назад

Yea, it seems that things were a bit different over here. By '87 the 64C was about $125 US and the 1541-II would have been another $100 on top of that. Most software came on disk and piracy was absolutely rampant.

@caeserromero3013 2 года назад

@@retrobitstv Yes that sounds about right. In the UK it wasn't till the Amiga that disks became standard and then many of the people who I knew who had Amigas had mostly pirate copies of games...Piracy wasn't such a thing on tape with the C64 as they were often so cheap. You wouldn't go to the trouble of copying a cassette game you could buy for a few £ :)

@niston 2 года назад

This is very neat. Thanks for posting!

@timsweeney1999 2 года назад

What a great project!!

@joonasmerinen7567 2 года назад

Very nice build, going to give this a try myself. 1581 would by an awesome drive to have...

@DailyCorvid 2 года назад

Oh man if I had any need whatsoever then this would be such a fun build project. The cost of the thing though! Since I have literally, no practical use for it .... relegates it to the "cool ideas I will never use" category. But this is super awesome, a real showcase for you as well.

@DrDavesDiversions 2 года назад

That's so cool, Matt! Didn't know this PCB existed... and you really pulled together a lot of collected components plus talents. I was smiling when it worked, first try. :)

@retrobitstv 2 года назад

I was totally prepared for hours and hours of tedious debugging. You can imagine how relieved I was when it just worked!

@DailyCorvid 2 года назад

"It just worked" was never a sentence I had attributes to any Commodore machine ever :D Kudos to you sir!

@overdriver99 2 года назад

great video! your contents are always very interestintg and very fun! thank you

@CaptainDangeax 2 года назад

Yeah, I like that. I never had a 1581 in my C64 time but I owned one 1540 and one 1541. I sold everything in 2001 and I never played again even on emulator. However I'm still amazed by you guys maintaining those old great machines alive

@nicospanatos6605 2 года назад

just stunning !

@jarekboniek 2 года назад

Great video, good work👍

@GodzillaB210 2 года назад

Just found your channel, good stuff! I used to do component level board repair and rework. On cleaning your flux you want to flood the board with IPA. Don't spare it like its precious holy water, use it. Then scrub with a brush and flood again. Then use compressed air to blow it dry. You will be happy with the results. Also for a more professional look you can reflow the solder joints after trimming the leads to give a nice little clean peak.

@retrobitstv 2 года назад

Thanks for the tips!

@NilsRetroHobbyRoom 2 года назад

Fantastic device and great video 👍🙂. Seems to be a nice addition to my atx64. Thanks for showing it 👍👍really interesting project 🙂

@dmc716 2 года назад

This was a very fun video to watch, thank you!!!

@retrobitstv 2 года назад

Glad you enjoyed it!

@10MARC Год назад

I feel so lucky that I found a original 1581 drive. I use it on my VIC-20 all the way up to my C128D. Cool stuff!

@retrobitstv Год назад

I regret selling my original 1581from back in the day but have managed to replace most of that stuff by now. Finding a replacement for my old Lt. Kernel drive though, now that's another story...

@w3rdup91 11 месяцев назад

Great video. I wish I saved all my Commodore items back in the day. I ended up selling it all. I remember having a 1541 and 1581 as well as the ram expansion.

@retrobitstv 11 месяцев назад

Same here, I sold it all to buy a 386 PC. Wish I had kept it as well :/

@DocMicrowave Год назад

Nice to know that the 1581 can fetch so much on Ebay. I still have mine from the 80s. Will hold on to it for a while more though.

@RetroWK 2 года назад

Great build and great video. Thanks! Really thinking about building one myself.

@retrobitstv 2 года назад

Thanks and good luck with your project if you decide to build one!

@BenHeckHacks 2 года назад

That clamp is sweet, thanks for providing the Amazon link!

@retrobitstv 2 года назад

NP! It wasn't that long ago I can be seen pushing little PCBs around the desk with my soldering iron or stacking components precariously under them to keep things level 😜

@chironbramberger 2 года назад

That was really cool!

@dennisp.2147 2 года назад

You need to clip off the PC floppy's green LED. A better idea for a power connector would be the actual Berg Floppy connector from a junked PC power supply with the molex crimped on the end. The Berg connector is keyed so it would cut down on accidental power reversals, assuming you plug the board side in properly. Nice video! I'm jealous.

@retrobitstv 2 года назад

Thanks! I've already desoldered the green LED and adjusted the front panel LEDs to sit better in the case! I will have to order the proper connectors. Both sides are keyed so it should be fine once done :)

@horusfalcon 2 года назад

Nice work. IPA is fine for removal of rosin-based flux so long as the concentration is 91% or better. The 91% stuff is available in a small spray bottle that is really handy, or in bulk bottles for refilling your sprayer. Shoot it down with the IPA, scrub with your brush, then use an absorbent paper towel or cloth to soak up the mess. I've made the mistake of getting resistor packs in backward, and, yeah it can lead to unpleasant consequences if not detected before power is applied.

@succuvamp_anna 2 года назад

Drench an old towel with IPA and lay it over the PCB, use your current brush and brush the towel over the PCB, that should remove most of the flux, I learned that from Noall's Retro Lab.

@retrobitstv 2 года назад

Cool, thanks. Will give it a try next time I open the drive back up!

@alerey4363 2 года назад

Great video, specially the price comparison table at the end; it's easy for most people to think they are paying overpriced items on ebay and amazon, but when you really dissect the components in retroitems like these, you can see some prices are about the same you'll spend on your own building from separate components ($300 to $350 seems about right if you don't have any parts available to salvage from old equipment); you know that having the top of the line floppy drive from the 80s nowadays is not going to be cheap...

@johneygd 2 года назад

Definitely a nice cool project🙏👍

@telengardforever7783 2 года назад

I wish I had this drive back when GEOS was my main OS. That would have rocked. But I was just the son of an enlisted man... Spending $400 for a CBM drive when the computer was practically free was just not an option in the mid 1980's.

@dougjohnson4266 2 года назад

Nice work.

@marcotassiello8741 2 года назад

Thanks very kind.

@Piglet6256 2 года назад

haha disk drive loading sound brought me back to my young days instantly! oeff :D

@CallousCoder 2 года назад

That’s an cool little project! I never had seen your channel before! Happy it popped up now. Aye you bend a pin... oh right you tell it now :)

@AlejandroRodolfoMendez 2 года назад

Awesome job. I like how new project like this give live again to old computers

@retrobitstv 2 года назад

Thanks! It is truly amazing how many awesome projects are coming out for vintage machines these days!

@AlejandroRodolfoMendez 2 года назад

@@retrobitstv since 3d printing and hdd replacement and diy parts people looks like a good deal for recycling, having real hw and having a old retro gaming machine. Also great video

@marcotassiello8741 2 года назад

thank you

@l0wpass 2 года назад

Cool video! I was lucky enough to have one of these for my BBS in the late 80s. Sad it ended up in a landfill with all the rest of my c64 stuff after I abandoned it at my parents in the mid 90s.

@retrobitstv 2 года назад

Bummer :( I sold my original Commodore stuff to buy a 386. Ah well.

@krzysztofjarzyna4225 2 года назад

Excellent!

@madmartigan1498 2 года назад

I always order a few more parts than I need. Guess why… P.S.: Great videos, I enjoy them.

@retrobitstv 2 года назад

Thanks! Yea, I always try to order at least 2 of everything. In this case, the parts kit from the vendor had exactly 1 of each component required and I ruined one of them by breaking off a leg :(

@Zhixalom 2 года назад

❤️ Brilliantly Done! 👍 👍 👍

@Matthamatic 7 месяцев назад

15:15 My body physically tensed up.

@retrobitstv 6 месяцев назад

Haha yea what appears blatantly obvious on the camera can be hard to see when you have to sit way far back from the thing you're working on in order to not block the lens!

@Stoney3K 2 года назад

A good source of these parts is a dead 1571 as it has almost the same board, just in a different form factor and some additional glue logic. Both use WD1770 floppy controllers which then talk to the 6502-based host. And 1571 drives are very common.

@retrobitstv 2 года назад

Good info, thanks for sharing!

@johnbos4637 2 года назад

@@retrobitstv The original uses all off-the-shelf parts, and the MOS8520 can be found easily since they are used in all the early Amiga models. Sourcing parts from a 1571 is not required and if you do, you will likely be lynched at high noon. I reversed the 1581 5 years ago and built several of them and there were no problems sourcing parts.

@Stoney3K 2 года назад

@@johnbos4637 I wouldn't be concerned about cannibalizing a 1571 that's already dead, too many of them have already just ended up in the bin because of that. But pulling a drive apart that can be restored to working order, is a bit of a waste.

@magnusanemo103 Год назад

I built one of these boards and I use a regular USB charger as a power supply as my floppy drive (Sony MPF920) only require 5V. So I just soldered a DIN4 male connector to the other end of the USB cable. Cheap and simple!

@snorman1911 2 года назад

I wanted a 1581 so bad!

@maltronik 2 года назад

It's really amazing..... just really amazing...

@chadwolf3840 2 года назад

Very cool

@SOU6900 2 года назад

I'm not into Commodore systems, but I find this very neat.

@TomAHawk-py6vj 2 года назад

I only had a 1541 (still better than datasette) but i always wanted a 1581. Guess I won't need it today but hell yes do i love the sound of working floppy drives. For real, i still have a external 3.5" floppy drive with an usb adapter for my gaming pc just for shits and giggles :D

@MegaManNeo 2 года назад

Heh, that's actually why I still keep my ATX case from the Skylake era that too has a 3.5" slot bay. If I ever want to go back from miniITX to ATX, it receives a floppy drive connected via internal USB. Just for the lulz.

@fuckutube65 Год назад

Amazing work... All that's left is to sand down the 3D printed button so it matches the rest of the case in smoothness! ;-) Now go ahead and try the 1581 version of Colour Spectrum on your shiny new 1581 hooked up to your C128!

@retrobitstv Год назад

I still need to fix the button. I did remove the LED and create a new power lead so that's 2/3 tasks done! I have tried the Colour Spectrum demo!

@8BitNaptime 2 года назад

This is cool. I bought a 1581 when it came out, or a few years later, who knows anymore, but I also got a 1351 and 1764. I feel this combination added some new life to the 64 in the waning years.

@MrGoatflakes 2 года назад

What's the 1351 and 1764?

@8BitNaptime 2 года назад

@@MrGoatflakes Proportional mouse and 256K Ram expander.

@MrGoatflakes 2 года назад

@@8BitNaptime nice. I have seen Robin use an REU, but I don't quite get what he's doing apart from obviously blatting many pages back and fourth 🤔

@MrGoatflakes 2 года назад

@@8BitNaptime Robin from 8-bit show and tell that is...

@8BitNaptime 2 года назад

@@MrGoatflakes Think of the REU as a solid state drive made with RAM instead of flash memory, so you lose contents when you turn off the power. GEOS shows you the REU as RAM 1541 or a RAM 1571, a very fast drive. It makes GEOS almost instantly responsive, but every time you power it up, you have to copy all your files back to the REU. That's all the REU is, a bunch of external RAM the 64's CPU can only "see" by swapping memory in and out of the REU, but the REU has the hardware to do the actual transfers at something like 1 megabyte per second. Much faster than a CPU could.

@GrevDrake 2 года назад

Great video! When you install those chips, better use an anti-static mat and wristband , if these are CMOS-chips, they may get damaged from electrostatic discharges ;)

@retrobitstv 2 года назад

Good advice. I seem to have misplaced my anti-static wristband so I guess it's time to replace it :)

@OneTheAndOnlyOne Год назад

Awsome!

@chinesemusic8019 2 года назад

Great video. Building an entire 6502 computer for a floppy drive is awesome.

@Ragnar8504 2 года назад

Another recommendation (based on experience) on floppy power connectors: don't offset them. The two centre pins are ground and probably linked internally in the drive (I couldn't see any reason why drive designers wouldn't). That means if you get the connector offset by one pin, you're shorting either your 5 or 12 V supply to GND and that can let the magic smoke out. In my case I was lucky that the smoke came from the connector or wires and the AT power supply was robust enough not to care. Both the drive and power supply still worked perfectly fine after the mishap.

@retrobitstv 2 года назад

Good advice, thanks!

@marcoromildocappellari 2 года назад

very good

@robertsissco2439 2 года назад

To clean up the flux, use a lot of IPA and scrub with the nylon brush like before, then take a clean cloth (like from an old t-shirt) or one of those blue Scott's Shop papertowels and lay it over the back and then rub the nylon brush over the paper towel, this should absorb most of the flux/IPA waste without issue and leave very little in the way of tearing since you are just using the brush to make contact with the board to absorb the liquid and not running it over the legs on the underside.

@retrobitstv 2 года назад

I will have to give that a try, thanks for sharing!

@AsmodeusDeviluke 2 года назад

A very generous amount of IPA and a cheap toothbrush, then brush. Next, lay a sheet of paper towel damp with IPA over the PCB and run the toothbrush around soldered areas, this will help pick up that sticky/tacky feeling on the PCB surface.

@OffGridAussiePrepper 2 года назад

fkn awesome dude

@signbear999 2 года назад

I have a feeling this channel is going to REALLY blow up soon.

@retrobitstv 2 года назад

Hey thanks! That wouldn't be so bad; I'd love to be able to make content full time but that's a long way off still :)

@PJBonoVox 2 года назад

Looks great dude. Staggered it worked first time! I don't know a thing about 3D printing but can you sand and polish the button you printed? The surface and the witness marks look pretty gnarly.

@retrobitstv 2 года назад

Thanks! Yea, a lot of that comes down to how well put together the kit and PCB were. The silkscreen left nothing to chance! Yea, I agree - the plan is to finish the eject button with a sandable primer and then a color matched paint. There was a site that had created a Commodore Beige spray paint but they don't seem to have it in stock at the moment.

@1SMHARRIS 2 года назад

Nice build. Purchase yourself a hot air rework tool for components that are stubborn to remove.

@MrDDawson 2 года назад

Nice, sub earned. Great video.

@retrobitstv 2 года назад

Thanks and welcome!

@patrickdeunhouwer5926 2 года назад

Cool project…

@pkf4124 2 года назад

Wish I still had mine as this board would bring it back from the dead.

@Lee_Adamson_OCF 2 года назад

I like brake cleaner for flux cleanup. Nonchlorinated if you use it indoors.

@retrobitstv 2 года назад

Cool, thanks for the tip! I have brake cleaner out in the garage, will have to check if it's nonchlorinated or not.

@NumosG 2 года назад

On the topic of "gooey mess". I had used a very same looking brush with IPA to try to clean boards. It may have worked before (don't remember) but it certainly became gooey whenever it came into contact with IPA. Instead of cleaning, it made things worse. It *may* have been because I used it for other things in between, I don't remember. But it was really horrible. You could try just spraying IPA on the brush, waiting a few seconds and then touch it to see if it sticks. I started using a normal toothbrush and thrown the other brush away. (toothbrush may not be antistatic, use at own risk).

@colencasey7761 2 года назад

always mount ic sockets and resistor packs first, its just easier

@tenminutetokyo2643 2 года назад

Oh yeah. Now this is what I had in mind.

@mvl71 2 года назад

Sometimes the RU-vid algorithm has got it right. Subbed!

@retrobitstv 2 года назад

😃 Welcome and glad to have you here!

@bryansillman3240 2 года назад

In your video, you suggested that were living in the golden of retro computing? Do you honestly feel this to be true? If so, then that is the happiest thing I heard in a long, long time.

@retrobitstv 2 года назад

Absolutely! The sheer number of high quality software releases coming out alone is telling, and then we see limits continually pushed and broken like with the new Sonic port on the 64. And then there's all the new hardware being created: reproductions, enhancements, FPGA versions of chips that are no longer available, upgrades... In my humble opinion, there's never been a better time to be a retro enthusiast than right now!

@tuff_lover 2 года назад

22:34 Nice setup, I don't hate it.

@IntexDigitalSound 2 года назад

Thank you for this great video, I enjoyed it very much. Can you please shove me in the right direction as where I can get the "drive bay" thingy, the thing you printed at 08.20? I have a drive which is missing just that thing. Thx.

@retrobitstv 2 года назад

I got the 3D model for that from the forum64.de thread that's linked in the video description, but you will need to register an account to be able to download the attached files! Here is a direct link to the post with the file: www.forum64.de/index.php?thread/102472-1581replica-gotek1581-1581-pc-drive-adapter/&postID=1722477#post1722477

@IntexDigitalSound 2 года назад

@@retrobitstv Thanks.

@ChrisKewl 2 года назад

Do you have the pin spacer 3D part URL? That thing is awesome!

@retrobitstv 2 года назад

The one I used is www.thingiverse.com/thing:6703 but there are many variations of it available!

@tetsujin_144 2 года назад

It'd be fun to own a 1581 again, shame the casings are hard to come by now. It'd be neat if it could be modified to use HD capacity though I'd guess the reproduction logic isn't fast enough for that

@retrobitstv 2 года назад

There were HD drives available from CMD, and there are clones available for purchase (Rear Admiral Firedrive) from time to time but I'm not aware of any open source projects, yet!

@weepingscorpion8739 2 года назад

I've been looking for a 1581 ever since I realised they existed but never had the opportunity to buy one cheaply. So this option is a good one for me. The only problem is that the only parts I have myself right now is the PC drive (a few HD drives which are old enough that they should work fine as DD drives) and the PSU from a 1541-II which I however would like to keep using on my 1541-II. So now the question is: used 1581 or this kit? At least there are options. :) Great video and thanks for bringing this to our attention.

@8BitNaptime 2 года назад

Tough call. How good are you with electronics vs. just waiting for a good deal? Although the prices I see now for 1581s are easily 2-3x what I saw just one year ago.

@weepingscorpion8739 2 года назад

@@8BitNaptime I'd have to wait for a good deal. If I do go down the self-building route, I'd need to do some soldering practice first on some beginner's kits or something.

@ldchappell1 2 года назад

"I am beyond nervous at this point." he said cool as a cucumber and showed his audience that he indeed has the right stuff. 👍 Awesome job dude!

@retrobitstv 2 года назад

Hah, thanks! I don't know what I would have done if it didn't work; I don't have the tools or know-how to properly debug it (yet) :P

@XLV750RD01 Год назад

Back in 1992 I designed and built a 32kB RAM expansion with a 32kB ROM Emulator for the 1581. Good ole times.

@harvey42 2 года назад

Very nice done :) How did you do the speed comparisons?

@bocian85 2 года назад

Awesome video. What is the blue chewing gum you're using to temporarily hold parts on PCB ?

@retrobitstv 2 года назад

Thanks! It goes by a few names: "Blu-Tack" or "Mounting Putty". The one I'm using is this: amzn.to/2ZATJ6T

@nuclearcottonmouth Год назад

Those are cool case options. Where do the 1581 plexigass case and wooden case come from? Would you share the links?

@retrobitstv Год назад

Cases are from the "Replica 1581 Project Page" linked in the description but you will need to create an account to download files from the forum.

@cosanostra101 2 года назад

awes0me

@JustinEmlay 2 года назад

Pretty cool kit! But I'll never understand why people use jumper pads. It's pennies for a full blown jumper that makes it so much easier.

@jgordon7719 2 года назад

it's really fast too!

@MrGoatflakes 2 года назад

Awesome! How much extra software and hardware would be needed to make it DSHD I wonder 🤔

@retrobitstv 2 года назад

Good question! There were high density drives made for the C64/128 by CMD (FD2000), so it's totally within the realm of the possible. That said, the VL1772 disk controller used in the 1581 is only designed to interface with double density drives, so at a minimum it would require upgrading that, new firmware, etc. That's about as far as I'm willing to conjecture but I suspect that the increased data rates of HD disks may require more buffering or flow control, I don't know; well outside my area of expertise!

@DavideNastri 2 года назад

Amazing project! I love your monitor, which model is it?

@retrobitstv 2 года назад

Thanks! It's a Sony PVM 1342q and I reviewed it here! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4aaRi_yN0ds.html

@L30NBL4NK 2 года назад

This looks quite a complex task (like finding a new shell), even if you made it! :) They should remake those (or another enterprise) with different coloris, like a red one, a green one, etc. xD By dint those white shells everywhere make me a bit sick.

@UNSCPILOT Год назад

I would probably print it in clear PETG, then dye it (as close as I can get) Atomic Purple, cause that's still the best style for retro devices in my mind, thanks to the Gameboys I remember as a kid

@L30NBL4NK Год назад

@@UNSCPILOT I think this will require making a mold, and pouring epoxy resin mixed with coloring agents. Even if this kind of DIY sounds amazing.