The Ultimate Retro Chip Tester?

Подписаться 66 тыс.

Просмотров 149 тыс.

50% 1

Let's have a close look at the Retro Chip Tester Pro. With a list of hundreds of different retro chips and even the ability to read the contents of ROMs and use special adapters, is this the ultimate chip tester? Let's build one from scratch and find out (in spite of making a few mistakes along the way).
Support Noel's Retro Lab on Patreon: / noelsretrolab
You can also support Noel's Retro Lab on RU-vid by joining this channel:
/ @noelsretrolab
Chapters:
00:00 Intro
00:39 Build
04:50 Programming microcontroller
09:10 Power on
10:25 Basic functionality
13:29 DRAM
17:33 Database
18:47 SRAM
19:22 Logic chips
20:10 LCD!
22:43 ROM
24:18 Cost
25:07 Conclusion
Links:
Retro Chip Tester Pro 8bit-museum.de/sonstiges/hard...
Interactive BOM project github.com/openscopeproject/I...
Music tracks:
Funky Stars by McKlain mcklain.bandcamp.com/track/fu...
Battro OST by McKlain mcklain.bandcamp.com/track/ba...
More awesome music by McKlain: www.mcklain.com
🛠 Tools I use ➤ noelsretrolab.com/tools.html
Connect with Noel's Retro Lab:
Discord ➤ / discord
Facebook ➤ / noelsretrolab
Twitter ➤ / noelsretrolab
Instagram ➤ / noelsretrolab
Mailing list ➤ noelsretrolab.com

Наука

Опубликовано:

7 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 608

@8BitMuseum 2 года назад

For all who need a back button: The next firmware release will have one. - Update: v19 has been released (new menu, new switch assignments)

@NoelsRetroLab 2 года назад

That's great news! Thanks Stephan! I'm really looking forward to the next firmware release. (I just pinned your comment so everybody can see it).

@logicone5667 2 года назад

I thought this was a joke and a shot at current OS manufacturers like "The next apple update will have a brand new never before seen thing called a "drop down menu!" Lol

@DJAlup 2 года назад

You could use a larger screen and list the menu out. You can get the code to do this from build of Marlin firmware for 3d printers. That code also includes an encoder wheel with push button.

@8BitMuseum 2 года назад

@@logicone5667 Not really ;) I redefine the existing navigation keys. There was a poll last year what RCT users want and the result was to keep the existing GUI. But there have so many ICs been added in the last year that it is time to improve it a little bit I guess.

@sylviam6535 2 года назад

You really should have an option to sell this as a kit.

@travishayes6678 2 года назад

Perfect timing for me, as I've recently launched into a retrocomputing project. Thanks so much for this build and review!

@LongyFromCork 2 года назад

Great video, really useful device to have in your arsenal. Love the way you keep any mistakes in your videos, rather than editing them out. Makes for a far better viewing experience. Thanks Noel 👍

@NoelsRetroLab 2 года назад

Glad you enjoyed it, bonehead mistakes and all! 😃

@3vi1J 2 года назад

Love the "warts and all" aspect of this video. Thank you for showing your mistakes along the way, as we can learn much more from them than just seeing the working unit.

@NoelsRetroLab 2 года назад

Thank you! I try to keep mistakes, especially when there's something to be learned from them.

@xyz2112zyx 2 года назад

Wow! As always, your videos are really fun and well done! Thanks, Noel, for showing to us so many devices and computers. This RU-vid channel is pure gold!

@NoelsRetroLab 2 года назад

My pleasure!

@johnsonlam 2 года назад

Great walk through from start to finish, even point out the room to improve, I think the author will appreciate your work.

@williammanganaro9070 2 года назад

Love this video for two reasons. The first being its very well produced with clear explanations. It also shows the human side of many of us and the common mistakes and problem solving we all do from time to time such as working through the problem of programming the fuses and firmware, picking the wrong display, forgetting the contrast setting, etc. It's "reality" RU-vid. I really want to pull the trigger on this and build one. Keep up the fine work on your very informative videos sir.

@NoelsRetroLab 2 года назад

Thank you for the great feedback! I'm really glad to hear you liked it, mistakes and all 😃

@voneschenbachmusic 2 года назад

Very cool - glad there are things like this out there to test these old chips.

@AnotherMaker 2 года назад

I appreciate this video so much. I ordered my BOM and TOTALLY missed the screen too :) Thanks for all the great content as always. I'm a big (lurking) fan.

@SammYLightfooD Год назад

I just wanted to watch a minute into the video and now I watched the full. Super interesting review, thx!

@tiemanowo 2 года назад

12:47 if it doesn't have a dedicated back button by design, the easiest way will be implement in the firmware a "hold" (long press) state on the select button to jump back .

@markusfritze 2 года назад

Or use the back/jump buttons as "back/forward" and make a long press on either of them speed up the scrolling through the devices over time.

@NoelsRetroLab 2 года назад

Stephan just told me that he removed an unnecessary combination and added the back functionality for the next firmware. Yay! 😃

@jlucasound 2 года назад

@@NoelsRetroLab Awesome! Now I REALLY want one!! :-)

@nicwilson89 2 года назад

I was gonna say you could potentially read out the firmware data using AVR Studio or something (may need to whack some 'bodge' wires onto the micro to access the pins it uses for ISP if there's no ISP header) and just write that function in probably fairly easily, but if he's adding it anyway then there's no need :D

@tithund 2 года назад

I was thinking of putting the whole thing in a case and wiring an extra button to activate both, should also be able to connect a turning knob like that with some in between stuff.

@gallgreg 2 года назад

Very cool tester! Thanks for reviewing it!! Something more to add to my Christmas list! :)

@NoelsRetroLab 2 года назад

You're welcome! It's such a great piece of kit. You'll love it 😃

@retrohaxblog 2 года назад

Excellent video! Absolutely loved it!

@NoelsRetroLab 2 года назад

Glad you enjoyed it!

@slipcurve1410 2 года назад

You're right, it needs a rotary switch with a button and submenus. Also it's be cool to have a few memory buttons that could be custom shortcut to chips you test frequently.

@NoelsRetroLab 2 года назад

I agree. It does have something about frequently used chips which I didn't look in detail, but you may already be able to do exactly that.

@redace001 2 года назад

Yes, they need to look at what some of the 3D printer firmwares do with a menu and rotary switch and select button. Very effective way to handle long lists.

@gazeddy 2 года назад

@@redace001 the 3d printer lcd boards are made (in general) to an open "standard" and the cheapest often come with sd reader and rotary encoder on the board. to the point i integrate them into projects im using lcds on because its easier

@patzik1910 2 года назад

Great video, you actually mentioned this tester a while ago and that is how I found it. I bought the pcb and parts immediately and have build one myself a few months ago. I had to laugh when I saw the wrong zif socket early in the video, as I made the exact same mistake ;-) I flash mine with an arduino (programmed as isp) and this works fine, however you do have to disconnected the sd reader to program, so there's a tip for you and others. I would also like to mention that support from Stephan is just awesome, I have mailed him a few couple of times when I had a 'problem' and he is very helpful and all issues were solved within a day! Next to retro computers I repair arcade pcb's and this thing is a must have for this...

@NoelsRetroLab 2 года назад

Haha, I'm glad I'm not the only one making those silly mistakes 😃 And yes, Stephan has been amazing with his patience and support! Top notch!

@AFourEyedGeek 2 года назад

Incredible. A few days ago I was wondering if a product like this existed and this pops up in my recommended. Great video.

@NoelsRetroLab 2 года назад

Thank you! I guess RU-vid is reading minds now. That's pretty scary! 😃

@MoreFunMakingIt 2 года назад

Great video Noel! Love to see the mistakes. Best way to learn 😁

@NoelsRetroLab 2 года назад

Thanks! Glad that was useful. We all make those kind of mistakes sometimes 😃

@nickwallette6201 2 года назад

Psh.. I could totally design and build one of these myself. .... just as soon as I get done with the other 8000 projects I said that about. 😒 Hm. Maybe I should just buy one, so I could actually use it before I expire.

@NoelsRetroLab 2 года назад

Haha, and you could use it as part of your 8000 projects too 😃

@robertbruce7686 2 года назад

Ha ha ha never a truer statement said!!

@ThomasCaraccio 2 года назад

This is a brilliant device and I have nothing but praise for the amount of work the creators put into designing this super useful tool. Definitely on my list of things to get hold of! I'm thinking in terms of the user interface, having a number pad might be a good idea as the list of supported chips grows, so you could reference to a list number and jump straight to the chip you want.

@NoelsRetroLab 2 года назад

Agreed. It's truly amazing. The number pad could be quite useful, but I suspect that wouldn't work with the current microcontroller and would add quite a bit of complexity.

@hanznel8488 2 года назад

Don't underestimate the amount of work required to design and develop the software for something like this. The idea the they make this available at cost is truly generous. I think they can look at your comments regarding the user interface. It might not be a trivial exercise but doable to re-purpose some of the switches in different modes of the menu. Very good and thorough review. As usual saw a video pop up from your channel and jumped to view it. Great work.

@NoelsRetroLab 2 года назад

Oh, absolutely! The amount of work he's put into this and he continues to put into it is amazing! A part of the quirks of it is due to how it's grown since it started. At the beginning, when it only tested a handful of chips, something like a rotary button wasn't nearly as important as it is now. Glad you liked it and thanks for the kind words!

@nickwallette6201 2 года назад

Just the reference and look-up tool is a huge gift to the retro community. Sincere thanks to 8-bit Museum for that.

@vladnickul 2 года назад

is not at cost :)) not even close.

@BrainSlugs83 2 года назад

Remember to set the contrast for the new LCD. Also, I would mount it in a wooden case with a lid, and print the extended chip list as either a table on the inside is the lid, or as a little booklet that sits next to the device.

@NoelsRetroLab 2 года назад

Great idea about the case and putting the list there!

@orinokonx01 2 года назад

Totally worth it. I've got a couple of machines that I would love to use this on!

@NoelsRetroLab 2 года назад

It really is!

@csbluechip 2 года назад

Awesome video. Thanks for sharing the whole journey, mistakes included :)

@NoelsRetroLab 2 года назад

Glad you enjoyed it!

@glennbruner7504 2 года назад

Very impressive variety and amount of chips it can test. I would think having the ability to interface with a computer and use a simple VT52 interface would help vice relying on a LCD screen - but it does make this tester as a convenient standalone tester. An alternative tester that I recently acquired is the Tauntek IC tester that I saw reviewed by CuriousMarc YT channel. I like this tester because during testing it is able to measure current drawn by the chip and measure pin voltages are within VOL and VOH levels and even tristate levels. It’s helpful to see borderline chips that other testers may just declare pass even though the chip may pull way more current than normal. The tester reviewed here and the Tauntek tester, together, can be some great testers to both have to complement a viable work bench. Thanks for the review on this tester and highlight mistakes during the build that could easily happen to any of us.

@AnotherUser1000 2 года назад

Nice gadget and work, as always. If you are planning to use it constantly, as you already told us, I would suggest you(you know me...) to ask the manufacturer for 3 things to implement in the next update: First: For those who use the small screen, there should be an option to have a vertical or horizontal scrolling, in order to be able to see all of the available info. This might be good even for the big screens. Second: If we want to go back and choose the previous chip type, as you had the need to do, this could have been done by holding down the "next" button or using a combination of buttons, in order to go back one selection. Third: The ability to control the whole system(or even set some parameters like the fore-mentioned scrolling) from the computer, like all of the other programmers in the market do, as far as I know. I think that these thingies would be nice to have. Happy testing!

@speedsterh 2 года назад

Great vid ! I can't justify to buy the components and build this board but it's nice to know it exists. Thanks for letting us know about it

@NoelsRetroLab 2 года назад

You're welcome! It's definitely a bit on the costly side, but I know it can be really worth it for certain people depending on the projects they do.

@ElectronGordo 2 года назад

Super & great analysis. Nice comments to help to improve the design.

@NoelsRetroLab 2 года назад

Thank you! 👍

@jjock3239 26 дней назад

Excellent video and explanation. Thank you!

@garthhowe297 2 года назад

Terrific video...I learned more from your errors than I would have otherwise.

@NoelsRetroLab 2 года назад

I'm glad my errors were good for something! 😃

@joesmoe71 2 года назад

I think I'm sold on this. In the future making it so it can identify unidentified chips would be a fantastic feature if it can be added! Also adding a full keypad to directly enter chip numbers would make things easier too. If/when I get one I think I'm going to try to design a 3D printable case for it.

@NoelsRetroLab 2 года назад

You won't regret it 😃 A friend of mine used a small plastic case he had for something else that's JUST the right size of the tester. So he can carry it around really easily. I believe he also changed the power supply to use batteries, so he made it 100% portable. Really neat.

@na5y 2 года назад

Love the trouble shooting on the ATMega. I've had quite a few bricked ATMegas and never thought to introduce an external clock. Good stuff!

@NoelsRetroLab 2 года назад

Thank you! 👍

@bryanminugh9680 2 года назад

08:20 more impressive that electrical current flows in a loop, but yet only one single strand of wire connects the (temporary) pulse generator to the chip tester

@FrancoCatrin 2 года назад

I would use the same 4 buttons but with this actions: Up, Down, OK, Back. Reset would be just Up + Down pressed together. That would allow any navigation using a menu style interface. As always, great video Noel!

@DaveGagliardi 2 года назад

That is an amazing piece of kit that any retro restorer should have in their tool chest. From what I've seen on the creator's site though, the code does not seem to be open source. This is not a deal breaker, but I think it would allow for the community to contribute patches, like the one Noel refers to about a possible back button feature. To be absolutely clear though, I am planning on purchasing one of these for my own retro restoration projects, and having the ability to determine if memory chips and supporting logic chips are good or not is invaluable in my opinion.

@curtmayer1070 2 года назад

I put one together. the build was really satisfying, it came up the first time. I used it to test some ZIP dram.

@SomeMorganSomewhere 2 года назад

Yeah, as soon as I saw the interface I immediately thought "that should really be a rotary encoder with velocity" ;)

@fernandoz6329 2 года назад

Awesome board and step by step video. I saw the limitations on 13:00 . The only suggestion would be get rid of the button controllers and the display using the computer as a main interface via usb. That would simplify the overall board, and make it simpler.

@CathySiegert 2 года назад

I have this tester in version 1.2h and I dont regret buying it. It is very useful and today I can use it without problem (as like I´m sleeping).

@markusfritze 2 года назад

Thanks Noel. Love that you left the mistakes is… Great manuals often have the TLDR problem. We are all humans :-) I have a RAM tester (no idea what kind of model it is - it was pricy), which also measures the maximum speed of the RAM chip. I've found a bunch, where the maximum speed was slower than what was promised on the label…

@NoelsRetroLab 2 года назад

Glad you liked it! I think measuring the exact speed could be really interesting, I suspect you need a dedicated DRAM tester for that with a pretty powerful CPU to get that kind of accuracy. Someone brought up they were working on something like that in the previous tester comments I think.

@BertGrink 2 года назад

I think it was Adrian Black who ran into a similar issue with some RAM chips for one of his Tandy computers where the chips were a bit slower than what the label said. This led him to initially think the chips were bad, but once a viewer had alerted him to the issue, it turned out the chips were okay.

@andyash5675 2 года назад

I have just created a brushless motor controller, and it has a Hitachi display like that one. It has several pages of PID controls and other presets. The user interface uses a rotary encoder just exactly as Noel described. It's a fast effective way to implement any UI. The rotary encoder has a pushbutton built in, so you only need to hold one rotary control and you can do everything.

@NoelsRetroLab 2 года назад

I talked to Stephan about it and he's aware of that option, but apparently it's not possible because it uses more pins and the microcontroller is maxed out already. But we are getting an option for a back button, so that already will be pretty good.

@andyash5675 2 года назад

@@NoelsRetroLab Hi Noel. Something sounds a little odd there though, because the encoder (with built in push to select/deselect switch) only needs three I/O pins, and it could do everything. You already had four switches and you're talking about a new one. I like the rotary encoder best, and I think your original observation is spot on! :-)

@WacKEDmaN 2 года назад

just a tip...you could have used the arduino board to connect to the ICSP and program the chip! (that how i programmed my z80-mbc2 a few weeks ago)..you didnt have to buy that "programmer" EDIT: i see you mentioned that at the end of the vid! cool board...thanks for the look Noel

@ches74 2 года назад

Been wondering when this video was coming, now I know why it took extra long! 😂

@NoelsRetroLab 2 года назад

Yeah, there were a few bumps along the way 😃

@ches74 2 года назад

@@NoelsRetroLab turned out well but now you've got me holding out for the rotary encoder redesign. I could be waiting even longer for that. Doubt I can hold out! ;)

@Haplo-san 2 года назад

Amazing work of art. Hats off to 8Bit-Museum!

@10p6 2 года назад

Nice. I would love to see this evolve into a unit that can connect with an Amiga or ST, then check all common computer DIP chips, such as 68000, VIC, Pokey and so on, and have full Workbench / GEM support for easier navigation and feedback.

@ronnyverminck2741 2 года назад

I've also build the tester, great device and nice support/development/updates from Stephan S.

@alerey4363 2 года назад

Excelente placa en formato modular y con un manual que explica desde como armarla hasta como usarla, me recuerda mucho al homebrew computer club y la filosofia de armar las cosas uno mismo sabiendo como funcionan y dejandolas abiertas para modificarlas y expandirlas, gran video!

@borayurt66 2 года назад

Great tool, great review. Thank you. I was aware of this kit, even exchanged a few msgs with its designer last year. I only fix and maintain my modest collection of ZX Spectrums, so a bit on the expensive side for me, but yet, as you have already said, it is a very valuable tool for those who make money doing retro repairs, well worth the price for them, I wouldn't think twice if I were one. You are right on the idea of a rotary switch, I am sure the designer will consider that on the next hardware revision. Also since now you are used to buying parts twice :-) you should get a yellow positive image 4x20 LCD for that. Totally pin compatible, much better contrast and viewing angle, just a little more on the price tag but worth it. I've stopped using these "blue" LCDs on my projects long time ago, they are just a waste of money.

@NoelsRetroLab 2 года назад

Thanks! I think a rotary input is out of the question because the microcontroller is maxed out as far as pins. So it would have to be a significantly different revision. But that would be fantastic. You're right about the screen. You're probably talking about the OLED ones, right? I looked into it, but they're insanely expensive at the moment (around 40€).

@borayurt66 2 года назад

@@NoelsRetroLab No, not the OLED ones, same screen, same technology but positive image and yellow/green backlight. A graphic OLED screen will require too much change in code, there are OLED equivalents to that dot matrix screen but they are too expensive. Adding a rotary encoder will not require any extra pins, there are IO pins already assigned to those push buttons, they can be used for the rotary encoder and even sparing a couple of pins. All it needs is a daughter board to solder on the relevant section of the PCB to connect to those pins and some code change for a rotary driven menu system. This is the LCD I am talking about: www.aliexpress.com/item/32679234720.html Here is a better link, even the sales photo shows just how much better is the positive image ones: www.aliexpress.com/item/1005001694530172.html

@8BitMuseum 2 года назад

@@NoelsRetroLab With a little luck you can get one under 20 EUR. This is 22 EUR www.aliexpress.com/item/32929491915.html

@galier2 2 года назад

These LCD screen have the same controller and ALL work with a virtual display of 2 lines x 40 columns. The physical LCD will always just display a part of this virtual screen. If you write sequential chars on the display, they will be written to the RAMbut will not be displayed. A 4x20 display will have the first half of line 1 in line 1, the second half on line 2, then 1st half of line 2 on line 3 and the last half of line 2 on line 4 (or something like that, it's 30 years ago that I wrote a Siemens ES102 display emulation on such a Toshiba LCD display).

@awesomefacepalm 2 года назад

I was about to write the same comment haha They're fun and easy to work with, very fun as a first project to make your own library

@watchmakerful 2 года назад

Isn't a 20*4 display actually a set of two 2*20 displays?

@SidneyCritic 2 года назад

From memory - bad memory could be wrong -, there is 2 types of 4x20. I think it's just a couple of pins on the end that are different.

@binarybox.binarybox 2 года назад

I've replaced that type of buttons quite a few times in my projects as they fail. Rotary digital step control would be much better. I remember buying an IC tester from Maplin back in the 90s which had a board with an ISA connector...I used it mainly for 74 series. This new board covers a lot of different types of chip. Testing is slow but probably ok for occasional use. Checking the monitor screen carefully is essential to avoid missing any errors. Previous experience programming with Arduinos would help . The Manual looks good and is probably essential and read through carefully before starting the build. Nice one, Noel.

@mymessylab 2 года назад

Very interesting review. I didn’t know about it 👍

@jtveg 2 года назад

Great work. 🔌⚡ Thanks so much for sharing. 😎👌🏼

@NoelsRetroLab 2 года назад

You're welcome. Glad you liked it! 👍

@UncleAwesomeRetro 2 года назад

Excellent video :D This would be so great to test ram and different chips. I will ask if texelec can build and sell these preassembled.

@RodrigoSilva-ic5vw 2 года назад

amazing ,great project

@FPiorski 2 года назад

8:00 It may just be 4MHz, but I kind of expected some problems with signal integrity, seeing as you've only used one wire to connect the clock signal, meaning the ground return path was all the way through the pcb, ICSP connector, ribbon, programmer, USB port, the other USB port and finally the arduino's USB cable. Although if you really didn't change much between the two tries it's more likely it was just a dodgy connection. Either way, it was an interesting way to get the chip working without a high voltage programmer, so kudos to you!

@minombredepila1580 2 года назад

Such a good idea to purchase it. It will help you in your projects. Very lecturing video for people like me (and you as I see) that end purchasing the not-quite-correct components.Another fine video from Noel #AFVFN !!! Guess I'll make a t-shirt with this hashtag ;-)

@NoelsRetroLab 2 года назад

Thank you! Glad you found it useful 😃👍

@tw11tube 2 года назад

The 44256 were extremely common memory chip in the early 90s. Neary every 1MB VGA card was equipped with 8 of them. The GUS classic used these chips as sample RAM. Some 286/386SX mainboards that offered DIP socket memory as well as SIMMs accepted banks made of 4 44256 (for 16 bit data) and 2 41256 (for parity) to build a bank of 512K. So indeed, the chips are exotic for you, but that's just because they are newer than the retro stuff you usually deal with.

@NoelsRetroLab 2 года назад

Bah, fancy newfangled hardware! 🤣 Edit: They probably came from an Amstrad PPC or a PCW.

@MarkALong64 2 года назад

Many years ago (1985 to be precise), I was part of a design team for a RAM tester for use in factories. It was about a metre across and was too heavy for one person to move. Things have changed.

@NoelsRetroLab 2 года назад

Haha, seriously! As well as the prices of the DRAM itself! 😃

@MarkALong64 2 года назад

@@NoelsRetroLab When I was a student, I measured prices in how many 2114L chips that was - I had an Acorn Atom at the time and I wanted to expand it all the way to 12K.

@CallousCoder 2 года назад

Very nice! Great that there’s a Reichelt shopping cart :) and that documentation is very impressive. I also tend to handle manuals as troubleshooting guides :) Life’s too short to read manuals :) And ironically I am one of those developers that writes tons of documents and designs. Because I tend to forget easily. But nobody reads them and I can’t be angry, because that would be hypocritical:)

@acestudioscouk-Ace-G0ACE 2 года назад

Interesting and useful, thank-you.

@NoelsRetroLab 2 года назад

Glad you enjoyed it!

@RetroTheory 2 года назад

I was on the fence until the ROM trick , very cool device.

@NoelsRetroLab 2 года назад

It is! And I feel I didn't even show half of what it can do. There's a lot more than that hidden in the menus.

@johndczerwinski 2 года назад

I just bought one based on this video and can't wait to put it together. Regarding the price, I spent a few weeks on a project because an SRAM chip was counterfeit. If I had this device, it would have paid for itself in time alone.

@NoelsRetroLab 2 года назад

Fantastic! Great to hear. Good luck with it. Yes, it can quickly pay for itself with all the counterfeit chips going around.

@TheDiveO 2 года назад

You jumpstarted the car without your feed on the ground, literally. Considering that you wired the clock signal but not ground (if I didn't miss another connection in the scene) I wonder what kind of loops were in your setup to work at all. A real feat!

@NoelsRetroLab 2 года назад

Interesting. I didn't think much about it at the time. I must have lucked out with the grounds being common, probably because both devices were powered from the USB ports of the same computer.

@user-pk7mb9is1e 2 года назад

very good as always!

@NoelsRetroLab 2 года назад

Thank you! Cheers!

@donepearce 2 года назад

This machine is great, but it seriously needs a USB port and an associated PC application. That interface is far too clunky as it stands.

@bigbeef2654 2 года назад

no doubt? just a simple serial text based application running at 9600 baud

@joesmoe71 2 года назад

Or a keypad to directly enter chip numbers

@jameswyatt1304 2 года назад

@@bigbeef2654 Starting w/something simple through the ISP interface should be inexpensive and 9600bps would cover what I saw on the LCD. Being able to load the chip database updates from the uSD/TF card or USB, rather than AVR reload would rock.

@CollinBaillie 2 года назад

Dang it Stefan!! Another cool project I can't make.

@RavenWolfRetroTech Год назад

Awesome video and great inspiration. OK, OK, I admit I've been putting off putting this together for a year!!! I am going to go start right now... Until I inevitably get to the point where I ordered the wrong part or programmer.

@jonmarler 2 года назад

This device looks amazing! Not just for retro computing, but just general repair. Are there any plans to make this more commercially available globally?

@NoelsRetroLab 2 года назад

It is an amazing device! 😃 Stephan might pitch in, but this is not his primary business, so I doubt he'll make it more commercially available. However, if there's a lot of demand, I wonder if it would be worth of him to team up with some small company to produce kits.

@Ditt_o_datt_fran_bon 2 года назад

Great vid. And device. Thanks

@NoelsRetroLab 2 года назад

Glad you liked it!

@winstonsmith478 2 года назад

For better component selection ease, how about a master table with a four digit (or more if need) code for each device to be tested? Keeping the PCB markings the same for the benefit of other functions: Press "Reset" button to start the device selection process. Press the "Select" button multiple times to increase the most significant digit of the device code displayed on LCD - press "OK" button - display moves right to the next digit - press "Select" button multiple times to enter the next digit - press "OK" - and so forth. Press and HOLD the "Select" button to rapidly decrement current digit with the digit position moving left to the previous digit position after a "0" count. "Reset" button to start over.

@raginranga3494 2 года назад

Brilliant vid and thank you for sharing. You were able to extract the Amstrad chip code but is there another chip you can write it to?

@NoelsRetroLab 2 года назад

Thank you! Yes, you can write the data to any EPROM (in that case a 27C128 because it was 16KB). For that you need an EPROM programmer because this tester doesn't do that (it would require much higher voltages).

@darekolade9355 2 года назад

it is a wonderful and helpful video Thank you ,

@savagecircuits Год назад

I agree on using a rotary encoder. In fact most of the ones I use have a button press function built-in to them just for that reason.

@gregclare 2 года назад

Nice. The common TL866 programmer also tests many logic IC’s and memory chips, but this device looks like it also covers more of the earlier memory chips. Looks like a fun project to add to my project list queue. ;)

@NoelsRetroLab 2 года назад

Exactly. And I think the TL programmer doesn't test DRAMs at all, right? I need to get the latest update to be sure.

@8BitMuseum 2 года назад

@@NoelsRetroLab and it only also tests SRAMs 32k x 8 up. But it can burn EPROMs and thousands of other devices, so other target group.

@gregclare 2 года назад

@@NoelsRetroLab Yes, latest version tests 285 logic devices, and only 10 SRAM’s starting from the 6116 (no earlier devices). No DRAM tests supported. Of course the TL866 is primarily a Programmer, supporting over 16,000 devices. The few devices it tests is just a bonus. Strangely, the CMOS and TTL logic list also includes devices 6821 (Motorola PIA ?!?), and 8155, 8255, 8259, 8279 ? Not sure I want to stick one of my PIA’s in there to see if it tests it. LOL

@YogSothoth1969 2 года назад

Wow, that looks like a really useful device!

@NoelsRetroLab 2 года назад

Absolutely! It's earned a permanent spot on my workbench.

@DmitriyBychkov 2 года назад

@@NoelsRetroLab Is it able to distinguish LS/TTL from HC/CMOS chips?

@8BitMuseum 2 года назад

@@DmitriyBychkov No, it can't, sorry.

@horusfalcon 2 года назад

Well, that was fun! All you need now is a custom-designed 3D-printed case for it, and Bob's your uncle. The user interface you described (using a rotary pulser) seems like it would be do-able as a daughter card, no?

@borayurt66 2 года назад

Yes, it can easily be done with a daughter card that will solder on the existing push button pads. Very easy and non-costly way to do it, even the existing kit owners can buy that and upgrade. All it needs a software revision and that's not hard at all.

@psteier 2 года назад

I would just have fun building and soldering this device, it's like meditation... :D

@NoelsRetroLab 2 года назад

Yes, it's the type of project you can relax while building it: easy components, lots of similar ones next to each other... It took a good 2-3 hours to build, but it wasn't stressing like some SMD projects can be.

@paulmichaelfreedman8334 2 года назад

@@NoelsRetroLab Good ole THT :D

@eugenegrebionkin 2 года назад

@@NoelsRetroLab I built the OSSC some time back... that definitely wasn't any pleasant experience. Also taking in account that I built it only using the soldering iron and without using hot air station

@DmitriyBychkov 2 года назад

@@NoelsRetroLab Is the PCB available for order? If yes then how much is it? Is there a gerber file to order PCB myself?

@jlucasound 2 года назад

I would build it just so I can say, "I built this". :-) Maybe someone can come up with an easy mod that would enable a "backspace" function in the library? I assume it would not be easy. It would probably involve code change in the processor as well as added hardware. (?)

@Bianchi77 2 года назад

Nice video, thanks :)

@NoelsRetroLab 2 года назад

Glad you liked it! 👍

@LanceHall 2 года назад

That's an amazing device.

@the555timer 6 месяцев назад

7:55 where is the ground reference for the clock signal from the arduino?

@senilyDeluxe 2 года назад

That 256k x 4 DRAM is super popular in (S)VGA cards from 1988 to 1993, I have probably a hundred or so of these ICs (all inside some old (S)VGA cards)

@DanPowersGoSubaruGoGoGo 2 года назад

You can use any Arduino to flash other ATmegas. The sketch is in the Arduino IDE.

@frankowalker4662 2 года назад

Cool test gear. I would enjoy building it, but would have very little use for it. I repair, (or sometimes adapt and break), Spectrums, so I'm already sorted for test equipment for them. :)

@NoelsRetroLab 2 года назад

Exactly. If you're mostly doing one platform, it's probably total overkill.

@KolliRail 2 года назад

Wow, that's a great device!

@NoelsRetroLab 2 года назад

It really is!

@anthonyrich1592 2 года назад

So out of curiosity, what was that HM486*** chip's entire part number? I ask because the Hitachi HM4864-2, HM4864-3, HM4864P-2 and HM4864P-3 chips are slightly different from the Texas Instruments TMS4164-15NL you started with. They have 128 row address strobe cycles, as opposed to the 256 of the TMS parts, so I wonder if that affected the test outcome?

@bsvenss2 2 года назад

WOW! As we say in Denmark... _"Hold du kæft"_ and take my money! I need one of these asap!! BTW: Great video! and great the you showed your misstakes. You learn a lot from that. Instans subscriber!

@leesmithsworkshop 2 года назад

A great bit of kit, Can't you program the atmega from an Arduino in ISP mode instead of buying another programmer ?

@NoelsRetroLab 2 года назад

Yes, you probably could. In retrospect I should have tried that since I'm very comfortable with the Arduino, but I went down that way since it was the recommended way in the manual (even if that wasn't exactly the recommended programmer).

@leesmithsworkshop 2 года назад

@@NoelsRetroLab This just needs the encoder wheel and graphic screen, even mono like most ender printers would improve using it by a massive amount. Perhaps the 2560 is already at it's limits for IO and memory.

@borayurt66 2 года назад

Yes you can, but you'd still need to use AVRdude in command mode since I believe the code is supplied as a HEX file. There are very cheap ICSP AVR programmers available from the chinese markets that work well too.

@rlgrlg-oh6cc 2 года назад

The 4-line LCD would look better if you adjust the contrast. You shouldn't see boxes behind each character.

@NoelsRetroLab 2 года назад

You're right. I think they were more noticeable on camera for some reason, but I need to lower it a bit.

@Wingnut353 2 года назад

Why stop there, a nextion display with an HMI would be even better.... it could even display graphs of the chip outputs in realtime etc... honestly a ice40hk + some voltage level conversion would probably make a better tester this probably can't test that the ram is acutally performing at its specs as its too slow.

@8bitwiz_ 2 года назад

He adjusted it for his eyes. The camera is at a different angle, so it saw different contrast.

@gblargg 2 года назад

Those blue and white backlit LCDs have superb contrast when adjusted right.

@jaymanjayman4471 2 года назад

oh man, this thing needs a rotary encoder soo baaad.

@1pcfred 2 года назад

It needs a PC interface. Then you could dispense with that LCD screen and the buttons. Everyone is going to have a PC.

@MaverickM1 2 года назад

@@1pcfred fuck the pc. The win updates, firewalls, antivirus and all the rest. Standalone diag tools are always better/portable and also can be used instantly..

@melanierhianna 2 года назад

Been there and done that with “bricking” an AVR. With an AVR you can feed its clock directly to an output pin. So I use that from a second AVR to provide a clock.

@hannescamitz8575 2 года назад

So this kit is so retro that it ships with a real manual, amazing! For those who don't get it, old manuals were entire service manuals. :)

@8BitMuseum 2 года назад

It is not that retro. It is a pdf, not printed on paper ;)

@hannescamitz8575 2 года назад

@@8BitMuseum true! Can't have everything. 😉

@1pcfred 2 года назад

I wish I had that chip tester years ago. In order to test ICs I'd always have to build some circuit on a breadboard.

@glennthacker3606 2 года назад

My first thought on seeing this is that it could be useful for testing newly acquired chips to see if they're counterfeit before installing them. I wouldn't mind seeing how well it works for that.

@NoelsRetroLab 2 года назад

Exactly! First thing to do as soon as you get any chips in the mail.

@BradRaedel 2 года назад

That is my plan as well. I like to test all IC's before putting into inventory.

@thierrycalvet7928 2 года назад

Great video! Could you tell us where you finally find out the ZIF support?

@NoelsRetroLab 2 года назад

Thanks! I finally got the correct one from this vendor: aliexpress.com/item/32831052786.html

@thierrycalvet7928 2 года назад

@@NoelsRetroLab Thank you !

@theoracle6142 2 года назад

Great video, just started on my build. Can you make a video on setting up the Interactive BOM for the Retro Chip Tester Professional?

@NoelsRetroLab 2 года назад

There's nothing to set up. You should have received a bom.html file or something like that along with the BOM pdf. Just view it on a browser and you're all set. Good luck!

@theoracle6142 2 года назад

@@NoelsRetroLab Thank you, I thought you were using the interactive BOM plugin for kicad😉

@brettb.345 2 года назад

Got to get one.

@AiOinc1 2 года назад

Rotary encoders are expensive! The button setup would be fine but I agree, there should be a back button. Some combination could be added with a firmware update I'm sure. Might be nice to even let you put the menu / chip data on the SD card so you can select only the chips you want to test from a list on your computer to make it more convenient. Submenus kinda already exist with the jump function. A simple (short) test option would be nice though. A feature that would be nice would be load testing the outputs / current draw during idle and usage. That could turn this from hobbyist diagnostic tool to industrial engineering sample analyzer real fast. Real wishful thinking here but writing E/E/PROM chips would definitely be in the cards for this and I don't think it would be that hard to verify contents for them either. This could be an extremely powerful tool if it's given just a few extras!

@SergioVazquez-pr7ib 2 года назад

What app are you using at around 2:55?

@NoelsRetroLab 2 года назад

It's an HTML document that comes with the tester documentation. I think it was generated with Interactive BOM github.com/openscopeproject/InteractiveHtmlBom

@flodreiundneunzig 2 года назад

What version of Quazar -- Funky Stars is this playing at 3:15? It's not the .xm version.

@benjaminhanke79 2 года назад

This is close but not quite the right version ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7AHtXkOkvho.html

@jas8127 2 года назад

Hi,this is too advanced for me to build.Can you buy it ready assembled? Or buy the parts as a kit?. I'm trying to test the chips in a faulty intellivision that just show a black screen. Would the backbit tester be better for me? Thanks for any help

@Levelworm 2 года назад

That's very cool. I hope to make my own in a few years when I'm better at embedded development. One thing I'd like to add to this board is the feature to dump all bad addresses to a computer file (or PuTTY). Is it possible for these bad bits to serve as sort of encryption? I remember bad in the floppy days some developers put bad sectors for copy protection.