Building a Powdercoating Booth for Cheap! (DIY Spray Booth Build) 

I can't say it enough...this booth is amazing! Compared to how I used to do this when I coated in my small shed, it is a night and day difference! Thanks for watching, and I hope this helps some of you.

Love it in the process of making myself one now. Have the same fans.2 stacked on top of each other. But my booth is twice that size . Hope it’s going to work. Thanks for the ideas.

Very simple build indeed and serves it purpose. My booth is very similar, instead of the 2x4, I used a piece of 1/4 × 1" metal bar attached like your 2x4. Reason for that was I can ground the bar at the top and use metal dog leash type hooks and slide them wherever. This way everything is grounded. I did like your use of the light position, may need to use this idea as well. Good luck on your projects.

What a fantastic idea .you are very talented great video

Good idea, good video, good sense of humor as well. Thanks

Very nice!

Nice build! It was a bonus, finding the shelf for free.

Thanks for the idea man, i just found a similar shelving unit for 20 bucks, but its close to 4ft deep as well, and im going to do a similar build. 👍

Good job man 👍

I used this as a guide to build my spray booth. However on the fans instead of using weather stripping, I removed the back grating and used those screws to attach the fan to the back of the wall. I tightened these screws up to pull the fan frame up tight against the wall, thus not needing the weather stripping. Also I used bolts with washers and nuts to hold the walls to the shelf frame.

Good stuff mate

Hahahahahahaha. "COVID" Made me laugh. Nice build!

Perfecto!

Nice build! definitely gonna do something similar, thanks for the ideas! Just a warning: you need the fans to have explosion proof motors for regular paint. Normal motors can spark and ignite aerosols.

Awesome

Perfect timing! I just had a steel delivery show up for a rolling booth that will sit over my re-purposed kitchen oven when it's not in use. Making the box out of plywood and Melamine like you did, but also making it removable from the steel frame if I ever run into problems. I think my garage is tinier than yours. :(

Awesome job man, thanks for your military service (as noticed in the flags). Can you put a link or give the name of the powder coating system you are using in the video.

Thumbs up for Datsun valve cover!

Love it. Awesome setup. I need to build something similar. But mine needs to fold so I can put it behind my oven.

I can tell you those green filters will not catch the powder...it will blow right through those and your fans will be covered in powder as well as your shop! Don’t ask how I know! Lol Unfortunately I had to buy the ones that say they filter smoke! Just FYI! I noticed you did change to different filters in the video! Lol Thanks for sharing though, kool booth!

Do you have a video of you building the oven? And a list of it?

What about your heat cabinet for the powder coat? I’d like to see that. Good job.

Hello, firstly I want to say thank you for making this video. I really appreciate your efforts and knowledge. I have a question, I’m setting up a powder coating booth for commercial production and I was wondering what brand of powder coating system do you use or recommend? Thanks again for everything!

This ... this is great. I dont have the words. Well, I do, but YT comment section couldnt do it justice, I simply have too many curse words that I would like to use for emphasis. Im impressed, every vid I watch of you, seeing what you do, always with economy in mind, spending where capital is important and not spending where it is okay to skimp a bit on quality. You have a great mind, Ill say that. Where ever you work Im sure you dont get paid enough. Im wanting to start powdercoating. 2 main hurdles are oven and clean up. This vid very nicely assuages my clean up hurdle. Now, what about that amazing looking walk in oven you got? Anything you can share about that, please😁

👊🏽

do you have a specific parts list !!!

Hey boss I’m going to build the same unit but with just one fan and I just want to know if any dust get throw the filter/ back fan?? Like do you have something to collect the duster hind the unit/ fan??? A funnel going to a bucket or leading outside?? Thanks

Great content, I’m new to powdercoating and was wondering if you have link to your oven build, or build specs. Thanks

Have you been doing much coating since you built this? Have you had any powder making it through the filter system and out into your shop? I just bought an armoire and want to modify that but want to try to capture all of the powder. I currently have it set up similar to yours but haven't tried it out yet.

How did you ground your booth . I have the same gun and seem to have a grounding issue

Have you had any trouble running your control box sideways like that? I'm looking at buying a set of folding shelf brackets for mine, so I can set it horizontal for use, then fold it down for storage. What thread are the holes in the side of the box?

What brand is your powdercoat gun and power supply? I am looking for a level up from the Eastwood 250 which is usually only $125

What filters did you use?

Does it help with fumes? It seems like the fumes would just blow out of the back and back into the room. Doesn’t it need to vent outside?

what kind of fans did you use? Thank you.

What are and where did you buy the panel sheeting?

can the powder be recovered from the filter?

wath kind of gun are you using??