Building a Random-Wire Antenna With a Choke, pt-1/2.

Подписаться 44 тыс.

Просмотров 16 тыс.

50% 1

For a shorter HF antenna the "Random Wire" antenna is a good option provided that you use an RF choke to get rid of troublesome common-mode currents. Here I combine both the 9:1 UNUN and the RF choke in the same box for a tidier installation. This antenna is typically used with a tuner and is multi-band. Max power? 50W, maybe... Check out part 2 for performances.
Watch Part-2: Working on it...
Version Française: En cours...
Case STL file: www.thingivers...
Protect your electronics with EMP Shield: www.empshield.com?coupon=radioprepper
Shop for radios: radioddity.refr...
Buy me a coffee at ko-fi.com/gilgsn
Shirts and mugs: teespring.com/...
Help this channel: / radioprepper
Facebook: / radiopreppers
Radio Preppers Forum: radiopreppers.com
Subscribe on my alternate platform:
odysee.com/@Ra...
Keybase: keybase.io/tea...
Help this channel by donating crypto:
BTC : bc1qc5jq4dxt7359sh80lkv9v8rlsgnh322hmn6xyc
DASH : XwiFaR1d6F9PGfC7Qqq6ARWbv8auDa7qM1
ETH : 0xe7cC2e415E0D2d1De91604B2b693f124dfBCf9B8
DOGE : D6ha2Ax7UhmtEMPC4fsaEJPxHrLSu3BwYW
XRP : r93TuQrkEq3X9UDkqXKYWaTkteB2ap4hMq
LTC : LYwDy55mZSeb1Czx6JUiTS5YkqjfmWKK5H
SOL : Ee9iJx6ouBih1beozjWrwYBQA9tQgr4nYwosZYsjfxaj
AMP : 0xe7cC2e415E0D2d1De91604B2b693f124dfBCf9B8
HNT : 13REusLAhArRpKGgMxYJKzm2vuFsaihstwqYmvTZ94SMkyXHxQh
TON : EQDpf64gb2kI8nqRtG3AgcquFpciz4aMIm4q38jjkM6n5fY_
QNT : 0xe7cC2e415E0D2d1De91604B2b693f124dfBCf9B8
XLM : GCW6RHWXXBADDPXG7LHNRPSYRFCATO6FD6J224GUWDPGOBB5ZU2ZF5MM
HBAR: 0.0.1786814
LINK: 0xe7cC2e415E0D2d1De91604B2b693f124dfBCf9B8
Get into crypto currencies:
coinbase.com/j...
Never leave more money than you can afford to lose on an exchange!
DISCLAIMER: The Radio Prepper logo (depicting a microphone) is indeed inspired from a famous flag created in 1775. It is NOTHING BUT a symbol of freedom and independence. It does NOT imply support to any political group. It does NOT imply, represent nor support any ideology with an intent on harming anyone. Freedom means freedom from persecution based on any human trait or belief such as, non exhaustively, race, gender, religion, sexual orientation or nationality. The Radio Prepper channel is a technology and science channel with a focus on preparedness and use of radio technology for disaster relief and small group communications in times of need. It is apolitical and open to anyone sharing the same interests.

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@OH8STN Год назад

Outstanding Gil! I absolutely love your antenna builds.

@RadioPrepper Год назад

Thanks Julian!

@mikesradiorepair Год назад

9:1 UNUN non resonant end fed antenna is my favorite field antenna. I get coverage on every band from 70cm to either 80M or 160M depending on wire length. For me in the field it's the ultimate all band antenna. Is it the perfect radiator, no but it works perfectly well. I have several of them I have made to loan out to new HAMS. Again, it's a great all band antenna to get someone started on the HF bands. Edited to add: Also they are not really "random wire". The length is quite critical to get all band coverage.

@RadioPrepper Год назад

Absolutely, "random" is a misnomer..

@prepper7961 Год назад

I would love to see a video with one of EMP Shield's antenna units installed in a ham radio antenna, then retuned.

@DK5ONV Год назад

Excellent Job, Gill. I cannot confirm of ever had Common Mode Issues with my 9:1UNUN's but I fully agree with you that the 49:1 Transformer is more effective than a 9:1UNUN. Happy Sunday & 73 de Uncle Guenter💯👍🙋‍♂

@RadioPrepper Год назад

Thanks! Some radios are more sensitive than others..

@user-ro3mn5eb9d Год назад

Great vid Gil, I use various EFRW with 9:1 ununs and occasionally with terminating resistors, especially if you use ALE. I want to share some Military secrets with you on the favorite ratio of the military (the 9:1) in its antennas..... The secret is ; in order to be able to operate in the lower HF bands (especially for NVIS) you must reduce from 9 turns to 7 ! this will provide the proper inductance below 7 mhz up to 1.5mhz providing of course you have the magic lengths that do not fall into the 1/2λ formulas of the radiating wire. this will also work with the various T2FD antennas and the BBTDs as well as in vertical configs (over 6m height and never at 6 or below) be aware though that with 7 turns instead of 9 you gain efficiency lower HF band but loose more efficiency above 14 mhz. but as all compromise antennas, they are designed for specific purpose's. in all cases though, try to never cross over the ant. feed wire over the transformer. remember though that ununs radiate the coax and rightfully you use a choke, in some freq. though the counterpoise should be as short as possible but direct ground to the dirt this will give better results. noted dearly that in your video part 2. that beautiful Mediterranean beach with pebbles gives a bad ground, I'd love to see you work the same config. in a redder dirt area like a nice French park. I'm sure you will have better results. 73's from an N2 in SV0 land!

@RadioPrepper Год назад

Great info thanks! I will try it on my boat with the counterpoise in the water..

@Soupie62 Год назад

Consider having the 2 toroids at right-angles, forming a T. Your common mode choke stays the same, but you no longer have to worry about your antenna wire having to cross over.

@halledwardb Год назад

I would love to have a coiled microphone logo displayed when printing the case. That would put it over the top! :) We have been looking for an small HF antenna project for the kids 705, this is it.

@airheadzadventures Год назад

Amazing stuff Gil!

@paulsengupta971 Год назад

EMP shield? So you turn your house into a Faraday Cage? That would be interesting as a radio ham! 🙂

@RadioPrepper Год назад

No, it just grounds everything. Not 100% protection but better than nothing.

@c.ag.3869 11 месяцев назад

J'ai bien aimé la demi-onde, sinon ! Bonne continuation.

@LouiseBrooksBob Год назад

Of course putting the choke right next to the transformer prevents the coax shield from acting as a counterpoise.

@c.ag.3869 11 месяцев назад

La boîte jaune ou la trouvé faut t'il la fabriquer en 3 D. Merci d'avance Gilles. En français c'est mieux.

@pasjeihobby Год назад

Cool desing.

@billryland6199 Год назад

You don't need a choke if the secondary of the 49:1 transformer is NOT connected to the primary. Use a counterpoise on the low end of the secondary so there will not be any common mode current on the coax. Adjust length and position of the counterpoise for lowest SWR.

@RadioPrepper Год назад

It's a 9:1, not a 49:1. No choke is necessary with a half-wave wire and a 49:1; it's just like a dipole. However this is a 9:1 with a random wire and the primary is connected to the secondary.

@billryland6199 5 месяцев назад

@@RadioPrepper Do not connect the primary and secondary. Use a real counterpoise on the secondary. No common mode current.

@mewintle 7 месяцев назад

Thanks!

@RadioPrepper 7 месяцев назад

Thank you!

@pasjeihobby Год назад

Amazing job.

@Centar1964 7 месяцев назад

I just had this idea last night, seeing how most ununs need a RF choke I don't understand why they are not a popular commercial item. They shouldn't interfere with each other because toroids are self shielding.

@DonzLockz Год назад

I really like the dual enclosure. I'm not sure about the iron core but if it works well, that's all that counts. Now I must add a 3D printer to my wish list. Haha

@RadioPrepper Год назад

The T106-2 works, I have a couple UNUNs using it, and better than an FT-140-43.

@downsouthsafaris6788 Год назад

Fascinating I’ve been playing around with the position of the ATU with the 9:1 unun when the radio isn’t close to the antenna. I keep the choke close to the ATU with generally a 1-3m patch to the UNUN I see you’re loving the new knife (with new cut on the finger!) I’ve built a QRP 9:1 unun using three strands of twisted multi strand wire from an Ethernet cable - I’ve had good results and wonder why it’s suggested to use solid wire, other than the chaos of flexible wire compared to enameled wire. Any ideas?

@RadioPrepper Год назад

The original document shows insulated multi-strand wires with colored insulation but I think solid wire stays in place better..

@RadioPrepper Год назад

The original document shows insulated multi-strand wires with colored insulation but I think solid wire stays in place better..

@c.ag.3869 11 месяцев назад

J'ai juste besoin de savoir quelle est la grandeur de l'antenne est de l'autre fil banane merci.

@RadioPrepper 11 месяцев назад

Bonjour la.longueur du fil d'antenne peut être tout sauf une demi onde sur les fréquences utilisées, généralement 8m. Le fil de contrepoid, je mets environ la moitié du vertical. En mettre quatre aide beaucoup aussi..

@JReed305 Год назад

I like it! Are you going to put the STL on Thingiverse when you're ready?

@RadioPrepper Год назад

It's on!

@JReed305 Год назад

@@RadioPrepper awesome!

@WHNorthcote Год назад

Maybe try the 5:1 former from G8JNJ. 6 toroids with copper tubing inserts and wire wrapped. Similar make to the Alpha Antenna balun but cheaper.

@RadioPrepper Год назад

I have a kit for it, need to build it..

@paulsengupta971 Год назад

Sounds interesting. Looking forward to the video on that one. Maybe I should search for the original...

@Wayde-VA3NCA Год назад

Hi Gill, I've made up a random wire with a couple of short lengths of ~25mm diameter PVC tube sections. The first has the 9:1 with optional terminal for a counter poise wire, then a second tube with 1:1 choke balun.. I normally use a length of coax between the transformer and the choke as my combined cp and feed line back to my operating position works well for me!

@RadioPrepper Год назад

Great, I am curious to see if it will work with the toroids so close..

@Wayde-VA3NCA Год назад

@@RadioPrepper yes will be interesting! It should work great, especially with a counterpoise terminal between transformer and choke. Thanks for the videos, Gil!

@spagsunfiltered Год назад

Very cool!

@c.ag.3869 11 месяцев назад

Je prendrais une boîte à gâteau sinon. Merci encore de ta connaissance c'est grâce à des gens comme toi qu'on se dirigera vers le radio amateur. ( diplôme en main bien-sûr.

@RadioPrepper 11 месяцев назад

Merci, elle est ici: www.thingiverse.com/thing:5907022 sinon je peux vous l'imprimer pour 14 Euros, envoi inclus: gil@radiopreppers.com

@c.ag.3869 11 месяцев назад

Ben merci je vais me pencher sur la question. Je verrai bien ce que je ferai .73 comme on dit avec la CB. Et bonne continuation.

@rickmckee6698 Год назад

Don't use a powdered iron core for the 9:1, us an FT140-61 core and it gives you a little more CMI. Powdered iron cores are designed to be used as inductors in tuned circuits in things like tuners and harmonic filters, they are not designed to be used as baluns and ununs for HF work.

@RadioPrepper Год назад

Did you watch the video? I explain...

@fastradioburst253 Год назад

Nice project, Gil. May I ask, what instrument are you using to measure the SWR? Is it a nanoVNA installed in a custom box, or perhaps something else? Thanks

@RadioPrepper Год назад

Hi, no, it's an EU1KY analyser..

@fastradioburst253 Год назад

@@RadioPrepper Thanks!

@NaturesChild Год назад

can the choke be wound with two wires instead of coax?

@RadioPrepper Год назад

Hi, certainly.

@youngmonk3801 Год назад

i dont understand why it doesnt work at 80m. is there a modification you could do to make it better on the lower bands?

@RadioPrepper Год назад

It just isn't good at 80m... Using a different toroid is the solution.

@paulsengupta971 Год назад

@@RadioPrepper Next project, doing the same with FT240-43 and um, whatever the equivalent size of powdered iron core is! I built a 9:1 using an FT240-43 for my untuned EFHW. Since it was wet and windy and I hadn't put it up properly yet, I didn't want to go out and tune my EFHW, so I built a 9:1 transformer instead. On some bands the built in tuner in my 991 tunes with the 49:1, on other bands it tunes with my 9:1! 🙂

@RadioPrepper Год назад

Well, I have no need for a higher power rating though..

@paulsengupta971 Год назад

@@RadioPrepper

@morrinmoss Год назад

Why no glue around the torroids ? Be kind I'm a newbie.

@RadioPrepper Год назад

Hi, I did not say no glue on the toroids, I said no epoxy. I once potted two transformers in epoxy, neither worked. Hot glue, however, has no effect..

@RadioPrepper Год назад

Hi, I did not say no glue on the toroids, I said no epoxy. I once potted two transformers in epoxy, neither worked. Hot glue, however, has no effect.. I wish newbies did not have to ask OMs to be kind. Those who aren't are assholes..

@morrinmoss Год назад

@@RadioPrepper Thanks mate, 73 VK2LA

@rttakezo2000 Год назад

Gil, Gil, Gil...still testing AFTER epoxying? 🙂

@RadioPrepper Год назад

I epoxied them as to not need a case..

@RadioPrepper Год назад

I know right!

@voytekfid7734 Год назад

It looks, that on the left transformer (thumbnail photo), the one turn is missing.

@RadioPrepper Год назад

Which turn? Not important in any case..

@voytekfid7734 Год назад

Should be symmetrical : six to six or five to five, Not six to five as your photo shows. 73 from Voytek

@RadioPrepper Год назад

If it was a bifilar symmetrical design, but it isn't.. Whether it's an odd or even number of turns makes no difference. I did not even need to cross over.

@voytekfid7734 Год назад

Really ? What is the function of this transformer ? I hope, you know. We need to block the RF signal on the Coax Cable at this point (the Coax Shield). This is a reason to use of this transformer. The turns (both direction) must be the same, to neutralize magnetic field (the magnetic trap).

@_0815_ Год назад

@@voytekfid7734the current on the shield gets attenuated everytime it passes through the torrid. The number of turns is completely irrelevant to this function. The more turns the higher the CM attenuation. This W1JR "balun" is no transformer in any way, it's just a common mode choke.

@AdamosDad Год назад

✋73's🎙 KD9OAM🎧📻📡

@c.ag.3869 11 месяцев назад

Je sort d'un opération.En retrant dans ma chambre j'ai vu ta reponse et ma mère m'a montré par téléphone les photos de mon yaesu fraîchement acheter donc je suis doublement content. Merci

@RadioPrepper 11 месяцев назад

Bon rétablissement!

@dimitarmilkov2215 Месяц назад

1. I like the idea of 2 in 1 - 9:1 resistance transformer and choke, but why does it seem that the windings of the transformer are not 9, but 8, or am I wrong? 2. From the studies I have seen about the two types of toroids - if they are exchanged, better results will be obtained. I'm sure. de LZ1MD 73

@UpcomingJedi 5 месяцев назад

HA HA HA! Not that finger... Then he switches hands and shows a defiant 'V'. Right. Lets get on with the video

@LuisPerez-xe6nu Год назад

Gil, nice design. Since your design includes an integrated choke, this in theory would eliminate the coaxial as a counterpoise. So a counterpoise should be required to make it work. I have had a good experience with random wire antennas, also random wire antennas provide you with more wire length options and access to WARC bands. 73s

@LuisPerez-xe6nu Год назад

I want to add that the use of a counterpoise and a choke is what may confuse people the most when setting up a random wire End Fed antenna. I prefer a separated 9:1 UNUN and Choke, because it gives me the option to either use the coax as a counterpoise or choke it out of the equation if the coax length is not working for me. 73s

@RadioPrepper Год назад

Yes, good point.

@yt5bos Год назад

If you used 550ohms instead of 450ohms for testing with VNA that is why you got a bit high SWR on 40.

@dxexplorer Год назад

I never really built a random wire antenna until now. Ok... time to have fun and watch now 😀. 73 Gil.

@HAMRADIODUDE Год назад

That's a very elegant case design!

@mikemiles3068 Год назад

Good video 73 KV5P

@NamasenITN 5 месяцев назад

Does EMP protect from lightening?

@RadioPrepper 5 месяцев назад

Hi, EMP what?

@hectorpascal Год назад

LOL! Gil you have great ideas and enthusiasm but you really must curb this need to smother solder joints with glue BEFORE testing! (And trying to hand drill holes in large boxes, without using at least a cheap table vise to hold them, is just an advert for Bandaids!). I'd be very interested to compare the on-air performance of this layout using the ferrite as the transformer and the powdered iron toroid as the choke. And of course magnetic coupling between the toroids can be minimised if they are set at 90 degrees to each other - a bigger box is easy if you are 3D printing them.

@RadioPrepper Год назад

Guilty!

@vinniec5286 Год назад

I may be confused, but if you are going to use a tuner anyway, why is it not good on 40 meters (15:10)?

@RadioPrepper Год назад

80 not 40... It will work but won't be as efficient..

@АндрейДенисюк-ш7п Год назад

4:10 You disprove Kirchhoff's first law )) Counterpoise is always there. Explicit or implicit. Current simply doesn't flow into single wire, there must be second. If you don't have wire your counterpoise are the coax, your radio, your hand.

@RadioPrepper Год назад

Yes! But I don't want it to be the coax in this case so I add a wire...

@АндрейДенисюк-ш7п Год назад

@@RadioPrepper I wrote about EFHW ))