Building my Own Garage/Shed Workshop Addition! TIMELAPSE 

I would love to paint the frankenwagon one day, and this shop would make that possible. Now I can park the car inside. I've painted a car outside once before, and never again!

@@ThisOldJalopy thanks for the reply. Your series on the transformation of the vwmiata is inspiring.

LMAO, thanks

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-etH0sqxHKu4.html (skip to 3:45 to get to the point)

it was explained in the video. It's called Advanced Framing. Single top plate, 24oc studs, use metal hardware instead of jack studs, etc. Nothing wrong with that and the framing inspector had no problem with it. The roof decking joints are NOT on in between trusses.

To all Tube reader I offer my apologies, I based my critique on the building codes in my area. (I live in the Chicago, Cook County Area). Some of the building techniques you used would never pass code out here. Chicago has some of the strictest codes in the country, 24 inch o.c. studs would not pass, no sill seal would not pass, using metal gussets instead of jack studs would not pass, etc. Although we do use gussets in pre-built trusses and the like, and we use rafter ties so the roof doesn't blow off, and we use sheathing clips, not gussets. As far as your roof sheathing, at 6min 27secs of your video, you can see the plywood hanging into a space between the rafters. (maybe it was cut to size after it was installed?) Remember measure twice, cut once, then install. But what really counts is that your happy with it, it passed inspection in your area, and that its still standing the next day. I've seen buildings collapse, due to snow and wind, (they don't call Chicago, The Windy City for nothin'). Good luck on your future projects.