Тёмный
No video :(

Building the Rokr Marble Night City - Part 3 

Leo Kessels
Подписаться 1,6 тыс.
Просмотров 17 тыс.
50% 1

This episode works on steps 17 to 20. Now it's going to get more difficult: the transport mechanism. Because this is not yet on the base plate, it is all very wobbly. And since force must be applied regularly: be careful! It's easy to break something. There are also a lot of steel axles and even more plastic axle sleeves. And this is pretty fiddly work.
If you are also working on this build yourself: good luck. Otherwise, have fun watching.
In deze aflevering wordt gewerkt aan stap 17 tot en met 20. Nu gaat het moeilijker worden: het transportmechanisme. Omdat dit nog niet op de grondplaat staat is het allemaal erg wiebelig. En aangezien geregeld kracht uitgeoefend moet worden: wees voorzichtig! Er kan makkelijk iets breken. Er komen ook heel veel stalen asjes en nog meer kunststof as-hulsjes aan bod. En dit is behoorlijk gefrommel.
Als jullie zelf ook met deze bouw bezig zijn: veel sterkte. En anders: veel plezier met kijken.
In diese Folge bearbeite ich die Schritte 17 bis 20. Jetzt wird es schwieriger: der Transportmechanismus. Da dieser noch nicht auf der Bodenplatte sitzt, ist alles sehr wackelig. Und da regelmäßig Kraft angewendet werden muss: Vorsicht! Es ist leicht, etwas zu zerbrechen. Dazu kommen jede Menge Stahlachsen und noch mehr Kunststoff-Achshülsen. Und das ist ziemlich fummelige Arbeit.
Wenn Sie auch selbst an dieser Kugelbahn arbeiten: viel Glück. Ansonsten viel Spaß beim Zuschauen.
Music:
Happy Mistake - RKVC
Sweet Relief - Zachariah Hickman
All the Fixings - Zachariah Hickman
(RU-vid Audio Library)

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 23   
@buckethead60
@buckethead60 2 года назад
That stupid S shaped orbit transparent thingy was so frustrated so I'm glad you made this so I can see how to do it.
@leokessels88
@leokessels88 2 года назад
😊 Nice to read that I can be of help to you with my videos
@RonGibb-vi4zm
@RonGibb-vi4zm Год назад
I figured it out by doing a parts count.
@leokessels88
@leokessels88 Год назад
👍 And thanks for watching my videos.
@ottohansnitsch3764
@ottohansnitsch3764 2 года назад
Very useful help for the assembly and please do not forget to drink your coffee! 🙂
@leokessels88
@leokessels88 2 года назад
Thank you very much. And whatever I build... never without coffee ☕+🍪 😊
@ottohansnitsch3764
@ottohansnitsch3764 2 года назад
@@leokessels88 Best regards and wishes from Barcelona, Spain. I almost completed the assembly. Still have to install the last two components. In two days it will be working fine.
@leokessels88
@leokessels88 Год назад
👍Have fun with it. And then on to the next project 😉
@66lwmorgan
@66lwmorgan 2 года назад
Been watching your video's and they are very helpful. After the assembly of the crank handle you mentioned it was very wobbly and you are right. Back at 1:12 I decided to leave to leave C8 off and put the gear, D5 on and then added both C8 parts. Made it much less wobbly. I don't know if it will make a difference later but the wobbly part was way to much. I'm still working on it and I appreciate the time you took to make this video. One more thought, since you obviously have yours completed would you recommend gluing some of the parts so they don't work loose over time? I can see area's working loose and the entire coaster being a wobbly mess, thank you.
@leokessels88
@leokessels88 2 года назад
👍 I am happy when it turns out that I have been helpful to people with my videos. I have followed the building instruction fairly well, as I realized that the wobbling was caused by the fact that the structure was not yet on a base plate. And indeed... When everything is ready, the construction is really stable. I limited the use of glue to a few fragile parts (and if something broke). Have fun building. And keep watching; 2 new construction projects 🎬 will follow shortly.
@RonGibb-vi4zm
@RonGibb-vi4zm Год назад
At 10:15 in the video I can't tell if you are putting on 2 or 4 transparent sleeves. It looks like 4 however, the instruction book looks like they want only 2 sleeves per shaft here. I can't get the ball to traverse the plastic path. Must the sleeves be very tight? Great video and thanks for your help!
@leokessels88
@leokessels88 Год назад
The instruction book clearly states that there should be 4 transparent sleeves. Indeed, in my video this is not clearly shown because I did not film the placement of 8 sleeves all the way through.
@thomastrehy677
@thomastrehy677 Год назад
for me the A11 & A12 parts aren't staying in their slots in E12. any suggestions?
@leokessels88
@leokessels88 Год назад
If parts do not stay in the correct slot, and they are not moving parts: wood glue!
@thomastrehy677
@thomastrehy677 Год назад
@@leokessels88 thanks
@Brst0222
@Brst0222 2 года назад
My piece is breaking alot😢😢😢 really frustrating
@leokessels88
@leokessels88 2 года назад
I don't know which piece of you breaks easily 🤔. I won't say that nothing breaks in my build (you can see that). But if something does break, it's my own fault. Clumsiness or holding the part wrong. Always be careful when you have to use force; Use gentle force. May the force be with you 😉
@ww4830
@ww4830 Год назад
So I'm building mine and I think a hole is missing or in the wrong place because I can't align my pieces the way it says in the instruction since there is no hole their to put the metal piece
@leokessels88
@leokessels88 Год назад
I'm sorry but I can't help you. I am not psychic. You didn't post a video of you build, you don't clearly indicate where or what part is causing the problem.
@ww4830
@ww4830 Год назад
@@leokessels88 it's fine! I figured it out, I had to take all the piece of the crank off and then flip it around and like one or two other things that it didn't really specify in the instructions. It was frustrating but I got through it. Now I'm on step 23 and about to finish
@leokessels88
@leokessels88 Год назад
@@ww4830 👍 Good luck with the build. And have fun with the finished track.
@defiantjv2920
@defiantjv2920 2 года назад
How'd you do at 1:28 the needle through the small black circle
@leokessels88
@leokessels88 2 года назад
It's not a needle, it's an axle. And the little black circle is a pre-drilled hole. Where to place the axle and gears is clearly stated in the building instruction
Далее
Building the Rokr Marble Night City - Part 4
7:51
Просмотров 15 тыс.
Building the Rokr Marble Night City - Part 5
9:37
Просмотров 20 тыс.
When I met the most famous Cristiano
01:03
Просмотров 24 млн
ROKR Night City Marble Run
9:09
Просмотров 28 тыс.
Marble Night City 3D Puzzle
3:37
Просмотров 672
10 CRAZY Clocks You Won't Believe EXIST!
5:15
Просмотров 600 тыс.
ROKR Marble Spaceport Step-by-Step Assembly Guide
3:08:43
When I met the most famous Cristiano
01:03
Просмотров 24 млн