Тёмный

Building the Rokr Marble Night City - Part 5 

Leo Kessels
Подписаться 1,6 тыс.
Просмотров 21 тыс.
50% 1

The last construction video: steps 23, 24 and 25. And then this marble run is ready. And everything works! But I'll show that in a separate video.
This was a tough build for me, even for me. For a novice in this field: the assembley instruction is clear if you have already built previous models from this manufacturer. Installing some of the parts is very tricky; you sometimes have to use a lot of force, but at the same time be careful that nothing breaks. Some parts are very fragile. So I had to use some curse words and the wood glue in a few places. But the end result is impressive: a nice looking marble run where the marbles can take different paths.
Thanks for watching.
De laatste bouwvideo: stap 23, 24 en 25. En dan is deze knikkerbaan klaar. En alles functioneert! Maar dat laat ik in een aparte video nog zien.
Dit was ook voor mij een pittige bouw. Voor een nieuweling op dit gebied: de bouwbeschrijving is wel duidelijk als je al eerdere modellen van deze fabrikant gebouwd hebt. Het inbouwen van sommige van de onderdelen is erg lastig; je moet soms veel kracht gebruiken, maar tegelijk voorzichtig zijn dat niets breekt. Een aantal onderdelen zijn erg fragiel. Ik heb dan ook op een paar plaatsen een aantal vloekwoorden en de houtlijm moeten gebruiken. Maar het eindresultaat mag er zijn: een leuk uitziende knikkerbaan waar de knikkers verschillende wegen kunnen inslaan.
Bedankt voor het kijken.
Das letzte Bauvideo: Schritte 23, 24 und 25. Und dann ist diese Kugelbahn fertig. Und alles funktioniert! Aber das zeige ich in einem separaten Video.
Das war auch für mich ein harter Bau. Für einen Neuling in diesem Bereich: die Baubeschreibung ist eindeutig, wenn Sie bereits Vorgängermodelle dieses Herstellers gebaut haben. Einige der Teile zu installieren ist sehr schwierig; Sie müssen manchmal viel Kraft aufwenden, aber gleichzeitig aufpassen, dass nichts bricht. Einige Teile sind sehr zerbrechlich. So musste ich an einigen Stellen ein paar Schimpfwörter und den Holzleim verwenden. Aber das Endergebnis ist beeindruckend: eine schön aussehende Kugelbahn, auf der die Kugeln verschiedene Wege nehmen können.
Danke fürs Zuschauen.
Music:
Torrance Sunset - Dan Lebowitz
While you work - Dan Lebowitz
(RU-vid Audio Library)

Хобби

Опубликовано:

 

10 авг 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 25   
@rowgler1
@rowgler1 5 месяцев назад
Thank you. Built this a few years ago, found a part under it, A14. I never would have figured out where it came from. There it was at 5:30.
@leokessels88
@leokessels88 5 месяцев назад
👍 Fortunately, my videos are still useful for something 😂
@user-sl8mz6qm8o
@user-sl8mz6qm8o 6 месяцев назад
Thanks very much Leo. I seriously could not have done as well as I did with this build without your fantastic videos! Very much appreciated! I only wish I had started my obsession with ROKR with an easier model to begin with! I will certainly be following your videos for the Parkour Marble Run!
@leokessels88
@leokessels88 6 месяцев назад
You're welcome. Thank you for your response. This was indeed a challenging build, but I enjoyed it. I also started with an easier kit. The most difficult kit in this category was Woodtrick's Galaxy Marble Run. This build can also be seen on my channel.
@billeyler7041
@billeyler7041 Год назад
I appreciate all these videos! I'm just now referring again to E5, since the instructions aren't that clear which direction to put G5 (I don't see the > and o symbols for that one), but your video at 1:51 makes it clear. Whew! Bijna klaar! Hoera!
@leokessels88
@leokessels88 Год назад
Thank you for the compliment. I hope you will enjoy this track.
@ethal1222
@ethal1222 2 года назад
Well done with these videos! My kit was delivered yesterday and now I know what to expect when I build it today...👍
@leokessels88
@leokessels88 2 года назад
I wish you good luck and wisdom in building. And may the (gentle) force be with you 😁.
@AZWildk4t
@AZWildk4t 2 года назад
Thanks for the video. I ran into same cursing as you did at 2:15 in the video. Could not get that piece in. Finally just cut a small piece of the wood to fit it.
@leokessels88
@leokessels88 2 года назад
👍 It was indeed very fiddly at that stage. That's where a part broke during my build (I didn't film it 😀). Luckily I was able to glue it back in place. So you cant see it. Nobody is perfect 😉.
@MH-hm5cv
@MH-hm5cv 2 года назад
@@leokessels88 my part broke there too ugh
@leokessels88
@leokessels88 2 года назад
@@MH-hm5cv I thought I was the clumsy one. So apparently I'm not the only one who got problems at that spot 😊
@saiff1924
@saiff1924 2 месяца назад
Same here
@kfcroc18
@kfcroc18 2 года назад
I can't get thit part to stay, it keeps popping out. 4:19
@leokessels88
@leokessels88 2 года назад
For me it is always difficult to see from here what is wrong. All I can say is: look carefully at the instructions and check that at both ends everything is in the right place.
@woodysgeekchannel2204
@woodysgeekchannel2204 2 года назад
At the end of your video, you showed where that one part went, but what about all the other extra parts? Are they just spares?
@leokessels88
@leokessels88 2 года назад
Indeed. The spare parts were on a separate sheet or marked as a spare part. And so that one part remained.
@woodysgeekchannel2204
@woodysgeekchannel2204 2 года назад
@@leokessels88 Thank you very much. On to the next kit. I think a clock
@davidjring2709
@davidjring2709 2 года назад
These are great videos. My grandkids gave this to me at Xmas. I have vowed to pay them back for this. I would like to also meet the designer....and cuff him in the back of the head, and ask....what were you thinking!!!!! So far my breakage isn't too bad that a few drops of glue can't solve.
@leokessels88
@leokessels88 2 года назад
So it's clear that your grandchildren want to keep you busy for a while 😂😂 .... or test your patience
@klaartjelee-stemerdink3354
@klaartjelee-stemerdink3354 Год назад
Het lukt ons bij veel onderdelen niet om ze helemaal goed op de onderplaat te krijgen. Zelfs met veel kracht niet. Maar als de steuntjes niet strak op de onderplaat zitten, dan sluiten de onderdelen die erop moeten niet goed aan. Heb je misschien een tip?
@leokessels88
@leokessels88 Год назад
Als sommige onderdelen moeilijk in elkaar gaan, kun je ze met het stukje was insmeren. Dan gaat het misschien wat makkelijker.
@billfromdover8009
@billfromdover8009 Год назад
I bought two of these so I could have instant access to spare parts cuz replacement parts take forever to arrive as this company is somewhere in China. WARNING: Try your damnest not to break the spare parts as I'm down to MacGyvering with toothpicks, splints made from spare wood and tons of Gorilla wood glue. Mothers, teach your children well. Nice video, BTW.
@leokessels88
@leokessels88 Год назад
Thank you for the compliment 👍. To buy 2 pieces of the same puzzle right away?? These kits already contain spare parts of the most fragile parts. But your warning is justified. Some parts are fragile and sometimes you have to use force. But do it wisely, that is, carefully. I call that "controlled force". And if it turns out that some parts are difficult to fit together, put some wax on those parts. In most cases that helps. Good luck building. And may the controlled force be with you 😉
@billfromdover8009
@billfromdover8009 Год назад
@@leokessels88 The most cringeworthy phrase in the English language (to me, anyway) is "Gently but firmly". I know I'm gonna be in trouble before I even start.
Далее
Building the Rokr Marble Night City - Part 1
8:49
Просмотров 25 тыс.
Building the Rokr Marble Parkour LG501 - 4
11:05
Просмотров 7 тыс.
10 CRAZY Clocks You Won't Believe EXIST!
5:15
Просмотров 599 тыс.
GraviTrax Spiral Crash
3:53
Просмотров 78 тыс.
Building the Rokr Marble Night City - Part 3
11:25
Просмотров 16 тыс.
Rolling Ball Sculpture - created by David Morrell
3:15
Ugears Sky Watcher Assembly Explained
11:28
Просмотров 84 тыс.
Building the Rokr Marble Night City - Part 2
9:30
Просмотров 17 тыс.
🫓 Xorazim guch 💪  #littos
0:14
Просмотров 10 млн
Дети взломали аттракцион😱
0:21