Building The Ultimate PSP-1000

Подписаться 1,5 тыс.

Просмотров 8 тыс.

50% 1

Building The Ultimate PSP-1000. In this video I teardown the PSP and show you every step to building a brand new one. For this weeks video I decided to venture into uncharted territory and open my PSP. This PSP has been sitting in the shelf for over 10 years collecting dust. I decided to bring the PSP back to life because I was curious if it could still be used in 2023. Today we will be installing a number of things (list is down below) to make the PSP play games again. I would not recommend you buy a third party housing shell for your PSP because sometimes these shells are not made to the exact measurements (you'll see in the video). Hope this helps.
PSP-1000 Parts:
1. Protective Case: ebay.us/ksDsrm
2. Battery Pack: ebay.us/TMgeGr
3. Memory Stick Adapter: amzn.to/44bQAGb
4. Micro SD Card (128GB): amzn.to/3NoAnqb
5. Black Analog Stick: amzn.to/3r0Huhi
6. IPS Screen Mod: ebay.us/HPtvxD
7. Clear Buttons
8. Clear Housing Shell
Product links are affiliate links which means if you buy something I'll receive a small commission. This helps support the channel. Thank you for the support!
Socials! ►linktr.ee/MeloMarko
Subscribe! ►bit.ly/2o70KXs
All Love 💙

Игры

Опубликовано:

21 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@m3l3e 6 месяцев назад

2024 (barely but still) and still no quality 3rd party shells lol

@WarmGlassOfBatteryAcid 2 месяца назад

I bought my clear blue psp 1000 shell maybe 9 years ago and there are 0 issues with it. I don't use the buttons it came with cos they look silly use original black ones......

@hugo33100 Год назад

all these videos are blasts from the past. back in the day rocking a PSP2000 playing jax n daxter🔥

@MeloMarko Год назад

Love that game!! good old days

@derekis1joedirt 7 месяцев назад

Likewise

@viciouskillergamer2846 Год назад

Hahaha bro your out takes are funny as hell also dope video bro nice ultimate PSP keep up the funniness 😂😊

@MeloMarko Год назад

Thanks man for sure, on to the next one⏭

@bartvanvliet2572 4 месяца назад

Stick drifting problem can be fixed by using small washers between the analog stick and faceplate. These aftermarket faceplates don’t measure up 100% and what the washers do is apply a little bit more pressure on the analog stick contact points. Should do the trick

@egeknight5 5 месяцев назад

I have the Same Problems... I swaped a black 1000 with white reshell.... And the Stick drifts also I found the Problem : the white aftermarket Shell does Not make enough pressure to this rubbery thing where the stick pins preses.... So anoying !! I rather Play on the original dameged Shell..... Nice Video !!!

@dr69dav 7 месяцев назад

So i just did this mod (the 1st of 3 i'm doing) for my kids' christmas presents. I did a clear blue one and it fit together really well, didn't have to cut anything, (got lucky i guess) except the battery casing was a little tight and a few screw holes needed a forced thread start. Thanks for the video. It was really helpful. I would just add, there are 3 or 4 different motherboards for the 1000 psp, all have a different shorting point for the ips screen. I will post a link to the different pictures if anyone requests and the uploader allows

@MeloMarko 7 месяцев назад

Yeah of course, if anyone needs it go for it 👍🏼 hope everything goes well with your builds🤙🏼

@MrMestor 8 месяцев назад

Thanks for the case Infos 🙏🏻👍🏻

@NinjaFaceGames 7 дней назад

Yea it's a shame you can't get nice quality third party shells as I'd really like a glass screen lens on my 1000, as you can't use those with an original shell. Third party Gameboy shells by comparison are incredible.

@MeloMarko 2 дня назад

Yeah Gameboy shells seem like they are good quality.

@nemesisnine3297 5 месяцев назад

You should have kept the og back and just swap the front faceplate, also that battery is not really 3600mah, more like 500 mah 😂. Otherwise clean build. You can take that batt apart and use the board for big battery mod.

@malarius2043 2 месяца назад

yeah, you cant make 2400mAh difference without changing the size of battery, i almost got caught on it also while searching for new psp parts.

@NordicDan 10 месяцев назад

Good video. I plan to completely refurbish my old PSP as well using a new case I had ordered years ago and an IPS screen. I'm still torn on whether I want to use a reproduction "stock" battery that's advertised as 3600mAh or replace it with an internal LiPo battery that'll take the place of the UMD drive (all my games are on MicroSD already). The capacity between the two is the only thing that really puts me on the fence, since obviously 3600mAh would be better than the average of 1500-2200mAh that the LiPos I've seen have. I'll also need to replace the long-dead CMOS battery on the motherboard, so that might take some digging to source a feasible replacement.

@MeloMarko 10 месяцев назад

Good luck on the project I'm sure it will turn out great.

@ryanseft6528 6 месяцев назад

Love it nice video and IV had massive issues with new full case the joystick always messing up the major issue I then put my original one back on and boom joystick back to fully working and I'm doing what you do is to get a psp in good condition that's for parts to replace with original housing there are nice original white blue and red out there from Sony original best thing todo I knew I was not the only one with joystick issues from having them dam crappy case

@codyzelmer Год назад

so the reason your thumbstick is doing the thing is bc its not making contact on the motherboards contacts. theres a conductive silicon pad that sits between the thumbsticks pads and the motherboards pads to connect them. ill try and find it and link it :) had to replace mine is how i know

@MeloMarko Год назад

Appreciate the info🙌🏼

@ryanaudioo 6 месяцев назад

Nice Video

@gamingwolf7895 6 месяцев назад

how to i get the yellow part on to the power button i'm so stuck it's been like an hour to get this thing on and still nothing 21:28

@Derangolicious 10 месяцев назад

lol sound effects are top notch

@MeloMarko 10 месяцев назад

thank you🫡

@note11s53 6 месяцев назад

like a pro

@WarmGlassOfBatteryAcid 2 месяца назад

next mod it with a glass lens, Im waiting for mine to come

@MeloMarko 2 месяца назад

Good idea👍🏼

@seishiro_09 9 месяцев назад

I had the same experience here with my psp 1000 reshell, the buttons sucked, case quality sucked, stick drift on new stick because the case wont close properly on the analog stick side, battery cover wont stay put. I got the clear blue shell and it looks so good tho. I now just display it and play on my vita

@niccomanncanada1045 7 месяцев назад

Rip psp

@player1Robert 9 месяцев назад

I have question why it says PSP 1001 but actually have a PSP 1000 I don't understand because I've been fixing up my console my head hurts with screws and making sure I buy the right screws for it so I can replace the LCD screen

@arnavsahni688 8 месяцев назад

the last digit just tells where it was manufactured. It's still a psp 1000

@MY5TCrimson Год назад

I had that issue with the analog stick and this exact shell, too. In my case, the screw at the rear that's directly underneath it wasn't catching the thread at the front of the shell. Had to use one of the screws that came with the case rather than the OEM ones - then it held together properly and worked just fine thereafter. Also, the power button! Not sure about your instance, but I had to physically cut away extra plastic just to make it fit - the power button in my clear shell was clearly designed for a model other than the 1000 or even 2000. Definitely shoddy quality - but damn if it doesn't look nice!

@MeloMarko Год назад

Definitely needed to cut extra plastic as well to make stuff fit. It sure did look good but in my case the poor quality of the case made me just want to change back. Thanks for watching

@dr69dav 7 месяцев назад

ALSO at 8:20 Next to the letters "EP" you will see a clear rubber covering the contacts for the analogue stick. (no other video's mention this and it is crucial) Don't be an idiot like me and lose it!! it is needed for the joystick to work properly. I am now having to wait for a replacement !

@malarius2043 2 месяца назад

so, im gonna say one thing about the batteries, the thing is that the 3600 batteries are not even 3600 you cant made the same size battery as 1200 and make it 3600 its just imposible, i saw on reddit and other sites that people say the same thing, they are fake and its better to buy original 1200 from sony but new.

@MeloMarko 2 месяца назад

My 3600 last a little longer than the original but it’s honestly not that much. Knowing that info now, I would definitely try to buy an original for sure.