Watch This Before You Shell Swap A PSP 1000

Подписаться 7 тыс.

Просмотров 8 тыс.

50% 1

In this we pickup where we left off in the previous disassembly video. We start by cleaning the old parts, followed by installing and tweaking the new third party shell as we go. It is a much more involved process compared to the disassembly so get your tools ready.
Channel Support Affiliate Links For Everything Below:
PSP 1000 Full Shell Replacement:
s.click.aliexpress.com/e/_DE6...
Electric Screwdriver:
s.click.aliexpress.com/e/_Dmq...
Manual Screwdriver:
s.click.aliexpress.com/e/_Dke...
Tweezer Set:
s.click.aliexpress.com/e/_DCg...
Flush Cutter:
s.click.aliexpress.com/e/_Ddj...
Diamond Needle File Set:
s.click.aliexpress.com/e/_Dk0...
B7000 Adhesive Glue:
s.click.aliexpress.com/e/_DCj...
-----------------------------
Time Codes:
-----------------------------
00:00 - Intro & Required Tools
01:25 - Cleaning & Prep Work
06:12 - Important Notes For New Shells
08:47 - Power Switch Tweaks
10:02 - Silver Outline Tweaks
10:39 - UMD Drive Install
13:12 - SD/WIFI/Audio Jack Tweaks
13:56 - Infrared Cover Install
14:21 - Wi-Fi Switch Tweaks
15:14 - SD Card Flap Tweaks
16:28 - Heat Reform Method
16:41 - UMD Door Lock Tweaks
17:21 - Mid Frame Screw Situation
17:51 - Face Plate Install
18:44 - Conclusion & Final Notes
-----------------------------
Battery Contact Fix For Old Batteries On New Shells:
-----------------------------
I would add here if you are using an OG battery that isn't making proper contact with these third party shells, then you can cut a small piece of plastic from the button holder that came with your kit and put it on the bottom of the battery compartment to push the battery upwards and lock in place to make full contact.
-----------------------------
Discord: discordapp.com/invite/5bsGzq7
-----------------------------

Игры

Опубликовано:

6 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@Nohda1 2 месяца назад

Amazing 2 videos helped a lot on which tools to use and what parts to cut with the flush cutter I was mainly stuck on how to put the yellow power switch 8:15 your the only video that shows it 👍 If anyone gonna do a shell swap make sure to take pictures every time u take a part off or a screw so u can remember how to put it back

@user-vg6xv4qj4c 2 месяца назад

Thank you, priceless video I will even save it to my hdd to not to lose

@TotalKommando 3 месяца назад

Next 2 Videos Will Be: - 3DS Analog Stick Adaption - AliExpress PSPs

@demijebus6831 Месяц назад

Very nice.

@FatfighterXD1 2 месяца назад

Its such a shame the third party shells are made with such poor tolerances since a lot of second hand psp are "well loved" so to speak. Tried cleaning up my 1000 and 2000 with new shells and failed on both of them. Gamgear shells are much better made

@TotalKommando 2 месяца назад

Out of the 3 models I found at least for now and at this time, 3000 shells have the best chance of a good result. They seem to come and go and which manufacturer build is sent is usually a coin toss.

@trashcanpatrol Месяц назад

Great video! Have there been any reports of success using the original silver outer frame (along with original power/WiFi switch, etc) in a third party front + back shell?

@TotalKommando Месяц назад

I got you, so I just tried swapping my transparent glossy 1000 shell with the 2 part power switch to an OG Shell, everything fits alright, not perfect but it works, the top piece was the worse Swapping the otherway around, depending on what third party shell you got, you may need to trim the bottom lip on the OG power switch side, since there is no cut out on it, at least on my glossy transparent 1000 shell Just be ready to do tiny slot expansion/trims on the shell if you want it to drop in without too much stress on the plastics

@trashcanpatrol Месяц назад

@@TotalKommando Thanks! I just ordered a purple transparent 1000 shell (the only one I could find available on eBay) and the silver outer frame part has weird manufacturing circles here and there on it. I was thinking of just using the OG shell with OG power switch + Wifi switch etc to work around this. Unless there are any purple transparent shells of high quality you'd recommend elsewhere? I haven't identified a reliable source to find high quality shell replacements at this point

@TotalKommando Месяц назад

@@trashcanpatrol The fact you found a purple transparent 1000 shell is a miracle, those have been sold out for years so its practically rare lol Once you get it, you will figure out what to do, but if you wanna be on the safe side, you could order a spare trim outline from aliexpress or ebay just in case. Worse Best Case is you paint the trim black, throw on original black buttons and you got a sick unique psp 1000. The only good 1000 shells I have found are the matt finish transparent shells I have linked in the description, they have nearly OEM fit, its amazing.

@trashcanpatrol 23 дня назад

@@TotalKommando Sorry for my delay, I didn't see the notification on RU-vid until just now! That's awesome though! That re-ignites my interest to get the shell swap working. I had no idea how to describe it but trim outline is what I'll look for; thank you! I'm hoping this shell will be a good fit and everything, but will see. Hadn't even thought to check for extra shell parts to swap in, so that's a great option!

@toat_ Месяц назад

any plans on doing this for the other models?

@TotalKommando Месяц назад

All models are in the works, I gotta do Disassembly/Reassembly video followed by the Shell Swap video. They should be better structured than this one.

@WarmGlassOfBatteryAcid Месяц назад

i did this and i think the corrosion in my ribbon cables for the triggers broke connection after moving it around because they auto press.... I ordered replacement ribbons I hope that fixes it

@TotalKommando Месяц назад

Thankfully I can tell you in my experience those replacement ribbons work pretty well.

@netizenz7182 12 дней назад

Hi ! Would you know how to fix a 1000 PSP with original shell, the original UMD driver door doesn't close flush on both sides. Thanks !

@TotalKommando 12 дней назад

For that you want to look at and tweak 2 things 1 - The 2 side tabs need to be streight 2 - The latch and latch clip both are making proper contact, i usually bend one or use soldering iron to bring the door clip closer. I need to cover this someday in a video

@netizenz7182 12 дней назад

@@TotalKommando thanks I'll take a look into that ! If you make a video I'd be a happy man

@joshualewis8077 Месяц назад

I want to see someone make the back logo glow and flash when the umd loads

@TotalKommando Месяц назад

Added to the list of mods once I get to it : ) However I have plans for RGB lighting in the UMD area.

@joshualewis8077 Месяц назад

@@TotalKommando cool

@vanessavega4452 28 дней назад

Bought a third party shell on AliExpress. Buttons aren’t working, any suggestions? Thank you

@TotalKommando 28 дней назад

Use original buttons or buy white buttons from ali express, the white ones work well

@aprilfooze4082 Месяц назад

i was trying ti reassemble and the buttons with arrows i have to push them all the way down fir them to work. Any suggestions?

@TotalKommando Месяц назад

Add tape to the bottom of the plastic buttons, till things feel right, sometimes the silicon is worn and needs to be replaced if you had this problem before the swap

@TotalKommando Месяц назад

A small piece of tape to each of the sides, just big enough to not interfere with anything surrounding it, sometimes you have to add more than 1 layer, sometimes its becomes the opposite. You could also try adding a later of something thin like a piece of paper to push up the side you need to function better. Works for the DPAD but not so as east for the face buttons

@bladeofgloryv 11 дней назад

Hey man there any chance you could do my psp if i send it in ? Its a 1002

@TotalKommando 11 дней назад

I have been asked this question back when I was just entering highschool when I made my first modding video lol Answer is still no, not at this time xd Im making these videos to help people doing things themselfs : )

@_North Месяц назад

Your hands are either ginormous or my hands were just small when I had one of these. I think it's the first one.

@TotalKommando Месяц назад

I would say my my hands are medium the close up wide angle makes them look bigger, but my hands were definitely smaller as a kid lol I used the same techniques from 2008 to open and close.

@parz344 2 месяца назад

I expected a reassembly tutorial tbh now I’m here with a disassembled psp and gotta retrace the steps of the last video backwards :/

@TotalKommando 2 месяца назад

Your right, all this work then no reassembly tutorial. I'll make sure to make one. Then repeat it all 4 more times for the 2000, 3000, Go & E1000 : |

@parz344 2 месяца назад

@@TotalKommandoWell I appreciate the effort. I still needed a reassembly guide after using the disassembly guide. It just seemed like you did one especially cuz you say there’s two parts