BUYING CLAPPED OUT JET SKIS OFF MARKETPLACE PART 2.. WILL THEY RUN? 

Thank u so much Noah!! That means a lot!!

Thank u so much Samuel!! That means a lot! 🙂

Thank u very much!!

🙂🙂

Thanks a bunch Matt!!

Thanks man I always appreciate your help Eric!!

Thank u my friend!!😊

Thank you sooo much!! 😊

Thanks Kevin!! I was thinking the same thing and now thinking back when I opened up the carb I found the screws backed out halfway and was prob starving that cyl of gas! It all makes sense now!!

Hahaha that just made my day!! Thanks man 😂

Thank you very much!

Thank u soo much dave!! I just noticed I was Unsubbed to your channel?? Maybe I accidentally did it sometimes I fall asleep on utube lol but man I appreciate it very much!! Utube is really weird and it’s tough!! I beleive if I had a channel when I was younger I’d be huge, I had a more interesting life back then and didn’t have health issues that slow me down… but I’m hangin in there. Have u ever watched Waldo’s world? He has a rover just like yours and has a bunch of vids on it. I doubt if I’ll ever hit 100k lol 🤣 but thanks hahah

@@TheHomePros6221 Curious you say that. I've lost hundreds of subscribers for no apparent reason over the last 2 years. Then I get new ones and recognise them as being subs previously. Every time I posted a video I lost a bunch immediately. I contacted RU-vid but got no response. Did you resubscibe over night? My numbers never went up. If you have 9 friends get them to subscribe and I'm at 1k lol.

Hope you get to 1k soon!

@@NilsKall mee too I hope Dave gets to 100k

Thank you soo much my friend I really appreciate it!!

Thank u very much Harry!!

Thanks Jim!!

thanks jim

Thank you very much!! Yep oil in gas to prevent failure

they are really useful!! I really like it!!

Thank u my friend!!

hey Dave good to hear from ya!! hope the alt installl is going well, what’s it on? thanks for always checking out my videos and everything I really appreciate it dave!

@@TheHomePros6221 unfortunately on the range rover again! Last one I fitted was faulty. Can't even get a video out of it!! I'll catch up with you later when I get a chance to watch yours!

@@davesworkshop2714 👍

it defiently comes in handy!!

Thank you 🙂

🥹

Thank u tyler

Hey papa don!! Glad to see your comment!!! As far as lighting goes I try to hang a light over what I’m working on or beside it if the lighting isn’t good, however I have some pretty good lighting in the shed, I would highly recommend you get some nice led lighting for your garage, there is a company called hyperlight that makes some really good lighting and they contacted me to try out their lighting, I’m going to ask them if they might send u a light that u can promote on your channel or if not they aren’t crazy expensive but very good bright lights. What’s your email? I’ll ask them to contact you they mite send u a free light or give a discount 🤷 thanks for watching my friend!!

thank you joe 😊😊👍

Thank you!!

thanks nils I really appreciate it!! 😊

Thank you!!!!

that’s awesome man!! I’m glad u got it going!! I never heard that about injected models but I’m gonna check on it, thanks for the info

lol

They sure were

I beleive you are correct I found a bunch of cheap oil in the trailer box

You could run Yamaha ring free or another carbon reducing additive to the fuel , to keep the build up down

Got that rite

I cleaned them in part 1

It looked like it was installed crooked!

Thanks Kevin!! Ready for your next vid 😁

Thank u soo much!! I have part 1 2 and 3 already out check out my videos in my channel 🙂

Thanks man!! Congrats on your success as well your about to hit 20k really soon that’s pretty spectacular!! I’m hanging in there I haven’t been getting much sleep and am trying to stay positive, working on stuff helps kinda take my mind off of it but a lot of days my heart just hurts to bad so I have to rest a lot and then there are other days when it doesn’t hurt as bad and I feel somewhat normal and that’s when I make the videos. A company sent me a e bike that they want me to reveiw and I wrecked it the 2nd day trying to do more than my body can handle 😂 so I was hurting from that for a few days lol other than that I’m still here so I guess that’s a good thing 🙂

@@TheHomePros6221 thanks for the reply buddy! Im getting offers from companies like 2-3 times a week. Its starting to get really annoying, so far iv turned them all down, glad you didnt hurt yourself too bad 😅 hey atleast you had fun 🤔😂 take care bud!

You can See my Channel here..I rebuild a massey ferguson 65 reighte now . early on I rebuild a Ferguson TEF20 diesel totally .. You can subcribe if you want to mate .. Thanks Michell. NORWAY. 😊👍🚜

Channel name MF65 .

hey micheal thanks!!! and good eye seeing the gasket!! so the gasket is correct and this engine hasn’t been apart because the paint is still on all the bolts but when they installed the gasket from the factory they installed it crooked so it wasn’t lined up with the water ports. Thanks a bunch for watching my friend

Yes the factory have done a wery bad work to that engine mate ... now you can make it correct and She will run super fine again . 👍👍😊😊

@@Masseyferguson65 yea it’s pretty crazy that they did such a sloppy job on the gasket! thanks a ton brother for the support I really appreciate it!!

Thank u so much!! Part3 will be out shortly 😁

Dude you are so rite!!!!!!!! Me and u think exactly the same!!

thanks nils I just put one out 🙂

Thank you very much my friend I really appreciate it I just use a GoPro hero eight and some editing software

thank you 🙂

I was thinking about hopping them up a little bit but I kind a like keeping them in stock but if you got any good ideas for a Sandtrap let me kno

@@TheHomePros6221 I would just google sand traps for jet skis. I’ve watched some other RU-vidrs that built jet boats and they added some sand traps to theirs

@@d.collier_8280 thanks for the info!!

that’s exactly right

Thank you very much david!! Yes I’m a lil concerned on the Yamaha so I’m going to do my best to clean and vacuum it out really well 🤞 thanks again my friend!!

Thanks Donald 👍

Lol got that rite 🤣

you are correct 🙂

After u press in new sleeve it has to be bored to match piston

Thanks Dave I’ve had a lot going on hopefully I will have a video pretty shortly

it’s the man, mystery, Legend! thanks for watching!!

@@TheHomePros6221 LOL, I took my 1992 Harley-Davidson FLHTC to the shop for leaking base gaskets……………I SHOULD HAVE JUST TOOK IT TO YOU!! LOL!! And the “ Sand Sucker 3000”, you’ve been watching Ants Pants too much LOL.

@@09FLTRMM77 hahahah yea me and ants say stuff like that a lot to each other 😊😊

No water runs straight through this engine

Check out my 3rd vid on these were I rebuild them

Wait for my next video to come out as I rebuild both engines

😊 thanks!!

never buy a 2 stroke jetski unless you know how to work on them, 4 stroke jetskis are way more reliable, check out my other video rebuilding these skis

Does it have spark? If not then prob cdi or plugs, if it has spark then check compression…ect

It got spark for about 3 sec then quit then wait a few minutes it will do it again have spark I think the CDI box get hot

@@wildbenny11 sounds like it to me

Diesel

Dang u should have fixed em lol I did a trade on somthing I got for free

Did you watch the first video? I cleaned them up in the first vid

Thank you soo much for your wonderful comment!! It’s been awhile since I’ve posted any videos I’ve had some health issues and I’m rebuilding both jetskis I’m waiting on one part so I can finish the video and I have other videos made but I wanted to post the jetski video first, thanks again my friend!!

I Purchased, the SBT kit off eBay and you mail them your cylinders

Next weekend my computer crashed

Thanks by the way 🙂

Just these two

he was completely full of crap!!

🙂

Also fyi on the rotary valve if you advance one tooth will give better low end or if you retard better top but each will rob from the other! The center seals on seadoo are what go bad but you cant change when this happens oil will leach into cylinders and smoke like heck when sitting a while or hydro lock the piston after sitting. The carbs have small filters under pump that stop up because seadoos water catch fuel filter has a bypass and are junk! don't use it put a inline on it. Also fyi the round metering carb diaphragms on the seadoo are same as Yamaha but Yamaha is way way cheaper! do not use the aftermarket kits they are garbage!! 99.9% time the fuel pump diaphragms are just fine! Hold them to the light no holes no problem. and 99% the time you can just reuse the needle and seats if you don't remove the seats!!!! remember the fuel pump is sucking so if a fuel line leaks it will suck air the on off reserve valves get stopped too and they are cheep new.

Tons of great info thank you very much I finally got the Yamaha put back together and I took it out on the lake yesterday and it seemed to run really good and has a lot of power and idol great I haven’t started putting back together to 787 it needs a lot more work thanks for all your info I’ll probably need your help as I’m putting it back together