C4 Fabrication Rear Bumper Install (5th Gen 4runner) (Part 2)

Подписаться 89 тыс.

Просмотров 9 тыс.

50% 1

Did our video help you? If so, consider buying us a beer: bit.ly/3feE6tJ
In this video, we continue where we left off in Part 1 and show you how to get your single or dual swing-outs and associated hardware onto your C4 rear bumper. Depending on the options you chose, your install might be a little different than ours. We also include showing you how to wire your license plate light.
In case you missed Part 1, here's a link to that video:
• C4 Fabrication Rear Bu...
If you wanted to learn now to relocate your back-up camera onto your single swing-out or one of your dual swing-outs, here's a link to that video: • 5th Gen 4Runner Back-u...
**C4 Fabrication Website
www.c4fabricat...
**C4 Fab Installation Instructions PDF
www.c4fabricat...
**C4 Fab Bumper Install Video
• C4 Fabrication - 5th g...
*HELPFUL TOOLS*
If you're looking for other tools not used in this video, check out Timmy's Master Tool List.
www.amazon.com...
*Mini Grease Gun
amzn.to/2OnBBTK
*Red Devil Grease
amzn.to/2WlnxwR
*Brass Brush
amzn.to/2usX6cH
*Large Impact Socket Set (Contains the 36mm socket I used to drive the seals into the swing-arms).
amzn.to/2uBBbQV
*Dremel Tool Kit
amzn.to/2uu5Tv4
*1/2" Drive Flex Head Gear Wrench Ratchet
amzn.to/2Wnbq2r
*Gear Wrench Ratchet Set (1/4" & 3/8")
amzn.to/2U36AtN
*Gear Wrench Stubby 3/8” Flex Head Ratchet - (it use to be available for sale separately but now we can only find it as part of this 4-piece set) amzn.to/39kQVit
*Plastic Mallet
amzn.to/2CCOqVP
*Brass Drift Set
amzn.to/2WtPXFf
*SAE Allen Socket Set
amzn.to/2YpusXG
*Channel Locks
amzn.to/2uvqmjg
*Klein Wire Strippers
amzn.to/2utpSdu
*Klein Wire Strippers (for smaller wires)
amzn.to/2YnAkRu
*Ratcheting Terminal Crimper Set (to crimp butt connectors)
amzn.to/2UTJN0t
*Heat Shrink Butt Connectors
amzn.to/2URUPn0
*Heat Gun (to shrink butt connectors)
amzn.to/2TuB7wh
*Milwaukee Mi12 Cordless Ratchet
amzn.to/2utRZsE
*Milwaukee M12 Battery
amzn.to/3FJZO1j
*Milwaukee M12 High Capacity Battery
amzn.to/2HEFTpu
*Milwaukee M12 Battery Charger
amzn.to/2uo2o9x
**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates we earn from qualifying purchases.

Авто/Мото

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@TimmyTheToolman 4 года назад

*PLEASE READ THE VIDEO DESCRIPTION FOR HELPFUL INFORMATION*

@bugsmoran21 4 года назад

I watch many install videos and have yet to see someone correctly pack bearings. You're suppose to put a small ball of bearing grease in the palm of your hand and with the other hand grab the bearing by one side and work the grease in to the race working your way around the bearing. I'm no mechanic by any means but just passing along some info that may add longevity to your bearings. Cheers, Bugs

@TimmyTheToolman 4 года назад

You're right, that is the proper way to pack bearings. Thanks for sharing.

@AntonioClaudioMichael 5 лет назад

Love the quick disconnect for the license plate light

@AntonioClaudioMichael 5 лет назад

The final result is gorgeous

@MadeItHappenDaily 3 года назад

Great job on this video! I'm using it as a template to get my C4 swing mounted on my Tacoma.

@TimmyTheToolman 3 года назад

Thanks Stephen and good luck with the install.

@AntonioClaudioMichael 5 лет назад

Full size bearing races nice

@andrerollin645 5 лет назад

Very good video again !

@TimmyTheToolman 5 лет назад

Thanks Andre.

@karthiknatarajan2276 5 лет назад

This is great! love the step by step. I am prepping for mine to come in. One basic question--does the entire bumper fit on the back of the 4runner? I am wondering how to transport from the powder coating to home for install

@TimmyTheToolman 5 лет назад

Karthik Natarajan did you watch part 1?.. that might answer your question. But yes, the entire bumper takes the place of the stock rear bumper

@karthiknatarajan2276 5 лет назад

@@TimmyTheToolman I meant before the install, for transporting to and from the powder coating shop and home, would this fit inside the 4runner or did you have other means to transport it?

@TimmyTheToolman 5 лет назад

Karthik Natarajan Garett transported it to powder coating and back. So I’m assuming yes.

@AntonioClaudioMichael 5 лет назад

How hard is it to get the spare tire off with the license plate and license plate light there

@thomasdykas4309 3 года назад

I have one question, the top latch I have issues with it every time I hit a bump or pot hole the top latch keeps popping up, how can I fix that?

@TimmyTheToolman 3 года назад

I think this question would be best answered by the people at C4. Tell them the issue you are having and hopefully they will have a suggestion for you on how to correct it. Good Luck!

@davidwright5813 5 лет назад

What rear dual swing arm bumper do you prefer between the CBI and C4 Fab models? What are the pros and cons of each? Does the CBI rear bumper have a backup camera relocation kit?

@TimmyTheToolman 5 лет назад

We don't have a comparison of the two so we can't give you an opinion. I like the CBI bumper for my 3rd Gen, but I'm not familiar with the CBI 5th Gen bumper. C4 bumper makes a nice bumper but so does CBI. I do know there's a video install somewhere on RU-vid for a CBI rear bumper install on a 5th Gen so maybe you can check that out and figure out which one suits you better.

@AntonioClaudioMichael 5 лет назад

Great installation video as always timmy

@stevenmullins9799 5 лет назад

Any links or info on the license plate light quick disconnect? Would love to do this on my install next week.

@TimmyTheToolman 5 лет назад

The ones I bough via Amazon aren't for sale anymore. Just do a search on Amazon for a two wire weatherproof male/female connector. You'll find plenty of options.

@stevenmullins9799 5 лет назад

@@TimmyTheToolman Oh okay, thanks. Wonder what in the world they had in mind without a disconnect?

@TimmyTheToolman 5 лет назад

@@stevenmullins9799 A lot of fabrication companies leave things to be desired with their designs. I can say this C4 bumper is pretty well thought out, but you are right, how they missed including a disconnect with their license plate kit is an obvious mistake. But, it's a pretty minor thing. No bumper manufacturer that I've seen yet doesn't do everything perfect. There's always something lacking somewhere and you don't realize what that is until you get into the installation.

@stevenmullins9799 5 лет назад

@@TimmyTheToolman Right, I did a ton of research before ordering my C4 months ago and it seems awesome for what I need, and they even did a little custom work to make it better. I'll figure this out. Thanks!

@stevenmullins9799 5 лет назад

@@TimmyTheToolman In the end I did a hitch license plate bracket and it just simplified the whole thing. It's always lit and visible and left my wheel more easily accessible.