Cabinetry Basics P4 [Video 438]

Подписаться 255 тыс.

Просмотров 164 тыс.

50% 1

I get a lot of questions about #cabinet and #carcass #construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, in Part 2 I went through the most basic methods of joining the sides to the top & base, in Part 3 I looked at seven different types of hidden fixings, and in this concluding Part 4 I discuss wether you should fit a back, and how they should be hung on the wall…
Part 1 is here - • Cabinetry Basics Part ...
Part 2 is here - • Cabinetry Basics Part ...
Part 3 is here - • Cabinetry Basics P3 [V...
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
*Support 10 Minute Workshop as a RU-vid Member* bit.ly/10minuteMember
*Support 10 Minute Workshop on Patreon* - / 10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - bit.ly/10minuteShop
Amazon store - bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - bit.ly/10minute-links
Full list of ‘Stuff I use’ at bit.ly/stuff_I_use
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
++++++++
Mentioned in this video:-
Keyhole hanging plates (similar) amzn.to/3advhcW (US: (similar) amzn.to/3ovQHXJ)
Corner plate - amzn.to/3raoiZh (US: Nope, sorry 🤷‍♂️)
Cabinet hanging bracket wall plate - amzn.to/3adybOS (US: (complete bracket) amzn.to/2NLPWx7)
Grooving bit - amzn.to/3rc9LMJ (US: (OUCH!) amzn.to/36nx9Pa)
14mm straight bit for hanging plate - amzn.to/3pB8sX3 (US: amzn.to/2MhCBwd)
Self-centering bit is a Trend snappy one from this set - amzn.to/38FuzpO (US: (single bit) amzn.to/36tzTe1)
Ryobi air strike narrow crown stapler - amzn.to/3h6Mo2E (US: amzn.to/3283zeI)
Dowel jig kit - amzn.to/36FLdnx (US:[similar] amzn.to/3a0HKjX)
8 x 30mm dowels - amzn.to/38yb16J (US:[3/8th] amzn.to/2KJAKQ5)
Lamello Biscuits - amzn.to/39fuNnv (US: amzn.to/367dEKL)
Aldi Ferrex biscuit jointer no longer available
Festool Domino - amzn.to/2pVSnMk (US: amzn.to/2o7E22Q)
Festool Domino assortment - amzn.to/2piZjHa (US: amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - amzn.to/2oTq5CZ (US: amzn.to/2oOqyrL)
Domino connector set - amzn.to/2mV8OJu (US:amzn.to/2LKRDZ1)
Lamello Zeta P2 - amzn.to/2Xpu5vB (US: amzn.to/2Kufuv1)
Lamello Clamex P-14 amzn.to/2Wkm922 (US: ??)
Peanut 2 connector system - shop.intelligentfixings.com?ref=10minuteworkshop
Lamello Tenso P-14 - amzn.to/2Z5i4eX (US: woah - are these not available in the US??)
Festool TS55 Tracksaw - amzn.to/2pGvzDS (US: amzn.to/2oOgGhw)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Bessey Duo Klamp - amzn.to/2tsSWQs (US:amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool Granat abrasive - amzn.to/2A3c1vW (US: amzn.to/2gPAAUz)
Festool RTS 400 - amzn.to/2x6zGZW (US: amzn.to/2i84yXn)
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Festool ETS 150/5 - amzn.to/2sapsq9 (US: amzn.to/2ssbZgq)
Festool CTL Sys - amzn.to/2sKa2t3 (US: amzn.to/2tCvVdZ)
Festool CTL SYS Bags - amzn.to/2G9eFVd (US: amzn.to/2GduBpo)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
Silicone brush set - amzn.to/2guo6Sm (US: amzn.to/2yEWbZI)
Silicone brush (single) - amzn.to/2l5rNTD (US: amzn.to/2zqFaQl)
Polyvine PolyTen PVA - amzn.to/2svT03N (US: amzn.to/2rmHYL3)

Хобби

Опубликовано:

4 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 736

@garvielloken3929 2 года назад

That smug look when the cabinets fit perfectly flush - PRICELESS

@jeffstanley4593 3 года назад

There is no way I could have taken three separate carcasses attached them to a wall via three different methods and have them be level across the top. Even the same method is doubtful.

@markcopple2870 3 года назад

I was thinking the same thing. well done.

@10MinuteWorkshop 3 года назад

Well, I don't show you how many times I had to do them, lol! 😂👍

@brianglezman 3 года назад

@@10MinuteWorkshop You should do a basics on measuring and layout!

@andythebritton 3 года назад

Had the same thought. I could try that a dozen times and get the same number of variations!

@DavePawson 3 года назад

@@brianglezman Excellent idea.

@jaymacgee_A_Bawbag_Blethering 11 месяцев назад

I know I’m WELL late to the party , but your do good at demonstrating and explaining the basics that I’m not going to pay the £3,600 I’ve been quoted for a modest kitchen in my view that I need for my new house and am going to invest £400 in a range of tools and jigs and fittings , then follow your advice with MDF types and have a go myself . This is a fabulous resource you’ve made available and I genuinely thank you for that . 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@RuneBivrin 3 года назад

Just the tip with the tape on the level, with pencil marks for distance is well worth a Patreon offering. So simple, but incredibly practical. Beats any measurement in either metric or imperial hands down!

@10MinuteWorkshop 3 года назад

Thank you! 🙌👍

@derekhawley9660 Год назад

Yes, brilliant idea (I was going to say 'simple') ... its only simple to the man that made us look simple. ha ha

@diegohuijbregtsgarcia5102 4 месяца назад

I came down to the comments to say this, amazing tip

@JezVibert 3 года назад

Marking a datum on a spirit level. So obvious, why have I never thought of that before? Really useful series, thanks Peter and congratulations on 100,000 subs. Well deserved

@10MinuteWorkshop 3 года назад

Thanks! haha, always the little things isnt it? 👍

@garryholmberg6502 3 года назад

I wear wireless headphones when watching youtube videos as not to bore my wife to death. But this morning I was so stunned by the simplicity of using the level in this way that I said brilliant out loud!! My wife looked over at me with a puzzled look:! So I stopped the video, took off the headphones and proceeded to bore her to death explaining what a brilliant idea it was to use the level to transfer marks. Eventually I got her to agree to the brilliance, not sure if it was because I finally had explained it well enough, or that it was the only way she could get me to put my headphones back on:)! Simply brilliant! And ditto congrats on 100K!

@andythebritton 3 года назад

Yep - that's going to make my heart sink a little less every time I have to put something on the wall from now on.

@MrGuardcaptain 3 года назад

@@10MinuteWorkshop Was typing my comment and got as far as "Oh bloody hell Peter! Why did I never think of that" when @JezVibert beat me to it. It's so simple. I've spent a fortune hanging wall mounted cabinets over the last year fixing miss drilled holes and covering mistake (in my own house of course). Will never need to do that again. Genius.

@Reefgc 3 года назад

@@10MinuteWorkshop I am going to remember that one for sure! thx

@simonchiplin 3 года назад

What I find quite amazing is that Peter has made 3 identical cabinets and hung them on a wall using 3 different methods and got them all to line-up perfectly! That's the sort of thing that would keep me awake at night, worrying if they were all made right and would hang properly in someone's home. And Peter is doing it for sh!ts and giggles is seems! lol Btw Peter, congratulations on 100K! Next you can show us how to hang a 100K subscribers plaque properly lol

@10MinuteWorkshop 3 года назад

Well, I did have a perfectly flat and plumb ‘wall’ 😂👍👍

@reedpeterson719 3 года назад

I'm patiently waiting for the door hinge segment

@cricalix 3 года назад

Videos 269, 314, 348, 357, 380, 410, and 412 (all listed at ru-vid.comvideos) should help with your wait :)

@colinwilson7524 3 года назад

LOL! Came here to leave same comment

@TigerPutoG 3 года назад

Thank you for reminding me what I was watching for!!👊🤘

@jasonm.7358 3 года назад

Thank you, Peter, for this series, and all of your videos. Not only are they very useful for their intended purpose, but they are an absolute _model_ on what a properly edited RU-vid video should look like. Congratulations on 100k subscribers, sir, you deserve many more.

@10MinuteWorkshop 3 года назад

Thanks Jason! That’s very kind of you to say, and very much appreciated! 👍🙌

@TomSilver_42 Месяц назад

Those metal almost French cleats you shows at around 7:00 and further are here quite used to hang kitchen cabinets. With one detail, those small parts are mounted onto the cabinets while whole long strip is attached to the kitchen wall. So you can later on re-position cabinets as you like regardless of their horizontal size. And if the strip was attached to the wall on level, then all the cabinets will have their tops on same level as well (if those small counter parts were mounted on cabinets on same spot like top cabinet corners, obviously).

@Slugsie1 2 года назад

Nice series, and I learned plenty. Also, 7 months on and you're about to crack 150K!

@user-np7pq2gy1v 2 года назад

The best teacher on youtube! You anticipate every question I could have. Thank you! Your happiness is well-deserved and absolutely contagious when those cabinets line up perfectly. This channel is what it's all about!

@10MinuteWorkshop 2 года назад

Thank you! 😆 👍

@rorychallands8516 3 года назад

I think this has been commented on already - but I'd love to see a video from you on measuring for hanging things on walls: how you get consistent levels for cabinets, picture frames, etc. It's one of the things even the most DIY-phobic home dweller has to do fairly frequently. And it's bloody hard to get right! It looks like you've got some smart tricks up your sleeve, Peter. Thanks for another great video, also.

@10MinuteWorkshop 3 года назад

Thanks Rory! Yes, I think there may well be a ‘How to hang stuff up’ video out before too long! 👍👍

@Hanshu_beast_ 8 месяцев назад

I have watched all the 4 videos in the series without skipping a single second of the video, content and information is to the point. decent and informative video. Thanks for this video.

@frankblack1481 3 года назад

Now would be a good time for BLUM to step in and take over the sponsorship for the next series about drawers and doors.

@10MinuteWorkshop 3 года назад

Haha, that would be a fit! 👍👍😆

@geoffhayday6003 3 года назад

I find the fixing to the wall the hardest part, to end up with it where I want and fairly level. Some good tips here though, thank you.

@justicefries 3 месяца назад

Love your videos! That one trick about transferring hole center to a level is going to save me so much frustration. Cheers, Peter!

@10MinuteWorkshop 3 месяца назад

Thanks 👍

@weldabar Месяц назад

The "corner plate" used to hang the second cabinet can be found in the US if you know what terms to search for. Try "triangle mending plate" and you'll see it.

@fredio54 Месяц назад

Now a quarter million. Doesn't this outro seem quaint now :-D congrats anyway, even if rather late.

@davidsneddon2242 3 года назад

Absolutely amazing consistency in accuracy and quality in the whole series Peter, a true professional.

@10MinuteWorkshop 3 года назад

Thanks David! 👍👍

@drmkiwi 3 года назад

Well done and congratulations - It's just over a week since this was published and your subscribers have increased by more than 10% - Yah bloody hoo! Cheers, David

@10MinuteWorkshop 3 года назад

Thanks David! That exaggerates the growth a little - the videos are shot and scheduled ahead of time - but I'm still extremely happy with the way he year has started!😆 🙌 👍 👌

@AK-de3ej 3 года назад

It is very hard to watch all channels related to woodworking but I see that your channel is something different - there is a lot of good working hints event for amateurs who does not want to sell a kidney to buy tools, usually promoted by the influencers. On this channel I can see that a lot of things can be made using simple tools for beginners and clever ideas.

@10MinuteWorkshop 3 года назад

Thank you! I’ve been a cabinetmaker for ~20 years, so have a decent array of nice tools that O’ve purchased with the proceeds of my own labour - but I’m a big fan of cheap tools, tools that enable enthusiastic amateurs - which is what we all were once - to produce their own work at a cost that won’t make them give up before they event try starting! 👍👍

@MrGuardcaptain 3 года назад

The more I watch this video, the more I kick myself for every stupid mistake I've made fitting wall mounted cabinets. Peter, you have no idea how grateful I am to you for sharing your wisdom.

@10MinuteWorkshop 3 года назад

Thanks! And don’t kick yourself too hard - I only learned by doing it wrong, many, many times! 👍👍

@zoros1976 Год назад

Great and informative introduction to cabinet fixings! Thanks!

@Reuben.Hesser 3 года назад

Congratulations on 100K! As a teenager, I’d don’t have the resources to create multiple cabinets to understand different building methods etc. so your videos are so insightful to me. Built a garden shed over the summer and put up a feather-edge fence behind it, think my next project will be indoors for a change haha! Made plans for a bedside table with some drawers based on one I already have so will probably make that soon as I’ve not done drawers before.

@10MinuteWorkshop 3 года назад

Sounds great! Everything I learned, I learned by doing. 👍👍

@benjaminfisher5809 3 года назад

Your a gentleman Peter. Love your videos. Thanks for sharing buddy

@10MinuteWorkshop 3 года назад

Thank you! 👍👍

@bobpurcell5662 3 года назад

Congrats on the 100K - you deserve it.

@10MinuteWorkshop 3 года назад

Thanks! 🙌👍

@gangdavekilbey8491 3 года назад

What I like is simple advice and different examples on how to get the same results and not trying to say you need the most expensive tools

@10MinuteWorkshop 3 года назад

Thanks! 👍

@wearsjorge55 3 года назад

The level trick I use all the time for marking fixings for heated towel rails which usually have no play at all. Works perfectly every time

@10MinuteWorkshop 3 года назад

Yep, works great! 👍

@dhammer5645 3 года назад

Congrats Peter. It is well deserved!👍👍🇨🇦😃😃

@10MinuteWorkshop 3 года назад

Thanks! 👍

@leolord1 5 месяцев назад

These videos are pure gold!!

@CrapE_DM 8 месяцев назад

As soon as I'd heard of french cleats for hanging cabinets (I'd heard of it before this video), I knew that's all I'd ever want to do (if I could). I almost thought you weren't even going to show that option. In addition, if you're using french cleats, you don't actually need a groove for the back. You can put in edge blocks with the same thickness as the cleat piece around most outside and use it as a backer for attaching the back. A groove IS cleaner, though

@JohnRR 3 года назад

4:05 “yeah good luck with that” priceless!

@10MinuteWorkshop 3 года назад

😆👍

@Cogitoergothijs 2 года назад

Thanks Peter. I really enjoyed this series.

@rodgerq 3 года назад

Congrats on the 100k (110k a day later at my time of viewing in fact). Well deserved.

@10MinuteWorkshop 3 года назад

Thanks! 🙌👍

@NomadMakes 3 года назад

This is an amazingly informative series, Peter. I hope you intend to contine this kind of content. Cheers.

@10MinuteWorkshop 3 года назад

Thanks Goran! Yes, indeed; drawer and runner basics, anyone?? 🤔👍

@rainerl-h259 3 года назад

@@10MinuteWorkshop yes, good idea. Or cabinets standing on the floor with footing / base (don`t know the right word) I mean adjustable feet with a thin board to cover.

@bgdcg5493 3 года назад

@@10MinuteWorkshop that sounds just perfect 🙏

@gilbycoyote 3 года назад

One big takeaway for me is that i should get moving and finish my routertable. It would facilitate a lot of things. Congrats on the 100k

@10MinuteWorkshop 3 года назад

Thanks! And yes, they're very useful thing to have! 👍

@JohnCoronelTV 3 года назад

This is my favourite of the series

@10MinuteWorkshop 3 года назад

Thank you! 👍

@duco8882 Год назад

French Cleats for me. Anchors in wall not easy to find and sometimes distant. Excellent videos. Have learned a lot. Specifically dowels ❤️👍

@daniellyne1 3 года назад

Thank you Peter really appreciated you making this small series

@10MinuteWorkshop 3 года назад

Thanks! I enjoyed making this one, actually! 👍

@jonfenwick6200 Год назад

187k at the time of me watching theis, but well done mate. really glad i found your channel. ill be watching evrynight now.

@10MinuteWorkshop Год назад

Thank you, and welcome! 🙌👍

@ronh9384 3 года назад

Congratulations on the 100K mark!! Ron

@l1verm0m 3 года назад

Congratulations Peter... very well deserved

@10MinuteWorkshop 3 года назад

Thanks Mike! 👍

@sazdab 3 года назад

Mr Millard, you are a magnificent teacher willing to impart knowledge that is practical and easy to follow.!!! Thank you.!

@10MinuteWorkshop 3 года назад

Thank you! 👍🙌

@Smalltime 3 года назад

So kind of you to share your knowledge. Thanks!

@muttermotion 3 года назад

JENIUS ! marking the level ruler., thanx you ! thanx you ! thanx you !

@martinwardle9750 3 года назад

Love the pencil mark on tape on the level for spacing 😉

@10MinuteWorkshop 3 года назад

👌👍

@Benmeglei1 2 года назад

The face you make after every successful hanging. 😂 Brilliant.

@michaelburton4521 3 года назад

Congratulations on 100 thousand subscribers Peter

@10MinuteWorkshop 3 года назад

Thanks Michael! 👍👍

@alanmullock381 3 года назад

Well done on 100k Peter,well deserved mate!👍👍👍👍👍👍👍👍

@10MinuteWorkshop 3 года назад

Cheers Alan! 👍

@jin6000 7 месяцев назад

Man, your videos are nothing short of a PLEASURE to watch. Both for the excellent info within, and also to watch your exceptional workmanship. Well done and thank you so much!

@10MinuteWorkshop 7 месяцев назад

Thank you!

@michaelcarroll4330 3 года назад

Congrats on the 100k, Peter; testament to great content delivered with a lovely style - long May you continue👏👍

@10MinuteWorkshop 3 года назад

Thank you! Plenty more to come! 🙌👍

@gmanp3028 Год назад

what a great series. Thanks Peter

@BarbaryStudio 3 года назад

I learned a lot on this channel thank you Peter Millard

@10MinuteWorkshop 3 года назад

Thanks! 👍

@jamie7364 10 месяцев назад

Thanks - very helpful!

@jameschesterton Год назад

Amazing, thank you for this series.

@laapulsford 3 года назад

Yet another highly informative Peter, well done. *****

@10MinuteWorkshop 3 года назад

Thanks! 👍

@palmdodo 3 года назад

Congrats, Peter! 100k, and such wonderful video!

@tonylorentzen 3 года назад

Brilliant - loved this series!

@10MinuteWorkshop 3 года назад

Thank you! 👍

@ciptrofin 3 года назад

I just used your level-pencil-tape-marking method to hang some shelves and it worked GREAT! Thank you!

@rdb4996 2 года назад

I enjoyed the series, thank you!

@krisz1156 3 года назад

8:26 these are some happy cleats

@JimmyGarita Год назад

thanks for the cabinet serie, for sharing the knowledge and techniques!!

@NickWallaceCT 11 месяцев назад

Brilliant , thank you for taking the time to create these videos

@carllamb6711 3 года назад

Great video Pete been looking forward to this all week 👍👍👍👍

@10MinuteWorkshop 3 года назад

Thanks Carl! Hope it was worth the wait! 👍

@bezain7663 3 года назад

So great. This serie is a gem Thanks a lot Peter!

@10MinuteWorkshop 3 года назад

Thank you! 👍

@alaskanawesomeness9017 3 года назад

We had this conversation a few years ago but I still can't believe how nice of MDF you guys have over there. Great information !! Congrats on 100K!!!!!

@10MinuteWorkshop 3 года назад

Thanks! Yes, it is a different ‘breed’ of MDF, much higher quality than what I understand you folks have to put up with. 👍👍

@DongusKong Год назад

@@10MinuteWorkshop it's truly a crime how bad MDF is in the states. I'm beyond jealous

@Spreadsheets_and_pizza 3 года назад

Really enjoyed this series, thanks Peter.

@10MinuteWorkshop 3 года назад

Thank you! 👍

@hannahswann747 Год назад

Brilliant series. Thank you so much 🙏💥

@AvaGrowth 2 месяца назад

wow so many ways and they are all perfect level and set on the wall

@nam.321 2 года назад

Great content, thanks! I look forward to using these tips on a few shelves I’ll be building for the house.

@pachting 3 года назад

Thanks for the good info!

@ahuachapan2 7 месяцев назад

This video would have million of views if it has a more meaningful title. I was lucky to find it directly navigating your channel.

@10MinuteWorkshop 7 месяцев назад

I take your point, but for the record it's part of a series with well over a couple of million views in total.

@NicoSmets 3 года назад

Great series. Thank you.

@10MinuteWorkshop 3 года назад

Thanks Nico! 👍

@madventure2318 Год назад

Great work Peter. 100k subs you say at the end of the video - now 200k. You earned every one. Keep the videos coming.

@10MinuteWorkshop Год назад

Thank you! 🙌👍

@nnahk Год назад

I started watching these to fall asleep yo because your demeanor is relaxing but they've been too helpful and interesting 😊

@emmetworkshop2829 3 года назад

Well done on 100,000 subscribers Peter. Richly deserved. Thank you for all you’ve shared.

@10MinuteWorkshop 3 года назад

Thank you! 🙌👍

@douglaslopes1987 3 года назад

Awesome Peter. Every video showing things that might sound obvious for professionals, but are a real struggle for someone starting in woodworking. This video series is being amazing. Thank you very much. And congratulations for the 100k subscribers. I remember when you had about 20 or 30k lol. Well done and well deserved. And this is just the "beginning".... Have a great weekend.

@10MinuteWorkshop 3 года назад

Thanks Douglas - much appreciated! Good weekend yourself! 👍

@roberthatcher2773 3 года назад

Great series thanks Peter.

@10MinuteWorkshop 3 года назад

Cheers Robert! 👍

@garenne0169 3 года назад

One thing i particulary appreciate in your video is the clarity. You make me more confident in furniture making video after video. Thanks a lot Peter.

@10MinuteWorkshop 3 года назад

Thank you! 🙌👍

@KOZYgoat81 3 года назад

Nicely explained. Short and to the point. Thanks Peter!

@10MinuteWorkshop 3 года назад

Thanks Adam! 🙌👍

@krungstar4541 3 года назад

Really appreciate the series of 4. Spot on for what I needed. Basic stuff but loads of ideas to throw at the wall (literally)

@paulwhealy5243 3 года назад

Excellent series Peter - informative yet succinct as usual! Maybe a #5 video of wall mounting options - what’s in the wall? Maybe show the back side of wallboard most people never see. I’ve seen too many client DIY hangings where a small ikea/generic cabinet is full of books, yet they used 2 plastic wall anchor plugs and 1” screws. Yikes! An issue with small cabinets like you build in video is that they might only catch one stud on 16” centres. Some folks don’t know anything about studs or metal butterfly anchors or the newer mushrooming plastic anchors. Great stuff, Peter! Recently joined Patreon to glean all I can. Paul in Canada.

@10MinuteWorkshop 3 года назад

Thanks Paul, and welcome! And yes, there'll be a wall fixings video on the cards, for sure! 👍

@JAY-xg4se 3 года назад

Very helpful. Thanks Peter

@10MinuteWorkshop 3 года назад

Thanks! 👍

@virginiademelo Год назад

Ty for the class!! You have a talent for teaching imo

@rayhanmorales1364 Год назад

Great video series. Thanks from the DR

@steved8038 3 года назад

Congratulations ! 💯 .well deserved.

@10MinuteWorkshop 3 года назад

Thanks! 👍

@willhj7705 3 года назад

Great series - well done Peter!

@10MinuteWorkshop 3 года назад

Thanks! 👍

@itzseafairyplayz5527 2 года назад

best cabinet tutorial! Strong Fundamentals!

@10MinuteWorkshop 2 года назад

Thank you! 👍

@awantamta 3 года назад

I really enjoyed this mini series. Thank you for that.

@10MinuteWorkshop 3 года назад

Thanks! 👍

@MichaelCarroll 3 года назад

Excellent series -- thank you, Peter!

@10MinuteWorkshop 3 года назад

Cheers Michael! 👍

@markcopple2870 3 года назад

Great video. This was the best one of the series. Have a great weekend!

@10MinuteWorkshop 3 года назад

Thanks so much, Mark! You too! 👍

@carllamb6711 3 года назад

Congratulations Peter well done mate well deserved 👍👍👍👍

@10MinuteWorkshop 3 года назад

Thanks Carl! 🙌👍

@erictroutman1571 3 года назад

Thanks Peter. Good basic info that I can use. Congrats on 100k!

@10MinuteWorkshop 3 года назад

Thanks Eric! 👍

@karamathussain406 2 года назад

Very informative indeed. Thank you for such useful tips. I keep on watching for sure.

@daviddickson7494 3 года назад

Great video thanks for sharing

@10MinuteWorkshop 3 года назад

👍

@ThePiones 3 года назад

Great series, just what I needed.

@elguapo1507 3 года назад

Thanks Peter! Great to see them side by side in this way! 👍 Congratulations on your FIRST hundred thousand! 😁

@10MinuteWorkshop 3 года назад

Haha, thank you! 🙌👍

@MarceneiroFDS 3 года назад

Fantastic Peter. Well done!!! I would have given two tumbs-ups but is not possible in youtube ;) Congratulations for the 100K+ (at this time is 116K and growing). Nice, your were photographer too.