Amazing set up!! Few questions if I may ask. What tubing sizing connections to hard line in your 250 RM plumbing? Also on the Pax N18, are you using 3/4 ID lines pulling water from where in sump? And which area do you run it back into the sump area? Thanks!!
@@Portcityreef Thanks! I used 32mm pvc for the ReefMat, I replied to another person detailing how I did it. The pax tubing is 12/16mm and I installed quick release fittings which make it easier to pull out of sump. The output hose goes into the filter sock section which also gives good flow in the sump.
Tank looks great! I am just setting up a Cade 1500 Peninsula and will be delighted if it looks half as good as yours after 10 months! what media are you using in the sump?
@@benlee9647 I tried fans last summer and they didn’t really work, aircon did the trick tho. If you don’t have aircon then a chiller would probably work best.
@@Aquatic_Amigo I got all the plumbing from my LFS, you have to cut the main pipe a few inches below the gate valve and glue in a 40-32mm reducer. Then add a couple unions, some 45 and 90 degree pvc angles and about a metre of 32mm pvc. I just cut it all to fit first doing bit by bit then when I was happy with it I glued it all together.
