No video :(

Cafe Racer - Hump Build, ★Fibreglass Hump, PART 3, Honda CB750 Cafe Bike - Episode 27

Подписаться 197 тыс.

Просмотров 64 тыс.

50% 1

As always, I've left links to everything I've used to build this to save you searching for the right products, If you have any questions, feel free to ask. :) I'm happy to help.
#HumpBuildFibreglassHump #CafeRacerBuild #CafeRacerGarage
Parts and tools I use:
www.amazon.com...
💥💥Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for RU-vidrs💥💥
This is PART 3 of the Cafe Racer hump build series.
I'm joining the hump to the seat base, You could also build this all in one piece if you want, I did it this way because I thought I would make it easier to release from the mould it 2 small parts than 1 big part.
I gave this a bit of body filler to finish it off and I also reinforced the hump to the seat pan later with fibreglass on the underside that I isn't shown in this video.
TOOLS I USE OR RECOMMEND:
Hitachi Cordless Drill 18V amzn.to/2FjsrTc
Triton SuperJaws (Foot Clamp) amzn.to/2FfyoV6
Hitachi 5-Inch Angle Grinder amzn.to/2HaDsXq
Welder-Lincoln Electric Easy MIG amzn.to/2oMAsd4
Welding Helmet (Auto) amzn.to/2D4YJix
Rivet Nut Kit Set amzn.to/2tj2JN7
Center Punch (Spring Loaded) amzn.to/2D2nhJe
Sheetmetal Folding machine www.redfoxmachi...
SEAT PAN BUILD KIT:
Fibreglass Resin amzn.to/2tmlA9P (Video
Fibreglass Mat amzn.to/2tpNr9o
GelCoat (White) amzn.to/2rEkeDt
FlowCoat- (Gelcoat with wax for easy sanding) amzn.to/2IcMfgg
Fiberglass Roller amzn.to/2HbJ97o
Contact Cement (Foam Glue) amzn.to/2GaSehq
Foil Duct tape amzn.to/2FZfj6z
Mould Release Wax amzn.to/2G3LEJK
CAMERA:
Canon Camera Eos M6 amzn.to/2Ea5Abg (My New Camera)
Canon Camera Eos M3 amzn.to/2EauaIN (Cheaper Option)
=====================================================
For all commercial enquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
Want to help me create more content for you each week? You can now make a donation through Patreon! Even the smallest amount goes a long way and will be very much appreciated.
/ caferacergarage
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
★ 01. Smart Turn System Unboxing - Self Cancelling Motorcycle Indicators - STS FULL REVIEW
• ★Self CancellingTurn S...
★ 02. Cafe Racer, Hump Build, Fibreglass Mould, PART 2, Honda CB750 Cafe Bike Ep 26
• Cafe Racer Build ★ Hum...
★ 03. Cafe Racer ★ Tyres, Wheels and Fitting Wheel Bearings The Easy Way Ep 25
• Cafe Racer ★ Tyres, Wh...
★ 04. Cafe Racer, Hump Shaping the Fibreglass Mould, PART 1, Honda CB750 Cafe Bike Ep 24
• Cafe Racer ★ Hump Shap...
★ 05. 3 Channels Building ★Cafe Racers that I follow - Ep 23 - MotoVlog
• 3 Channels Building ★C...
★ 06. Removing Wheel Bearings, Powder Coating Prep, Cafe Racer Garage Tools - CB750 Cafe Racer Build Ep 22
• Removing Wheel Bearing...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff, including my CB750f2 Cafe Racer, SUBSCRIBE to follow my future builds, I'm based in Australia but I do travel a lot so check out my other channel with my amazing travel videos.
=====================================================

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 168

@CafeRacerGarage 5 лет назад

ALL Parts - www.amazon.com/shop/caferacergarage

@johnhoward3961 6 лет назад

Fantastic idea to match the hump with the tank. Make sure the colour steam is matching.

@CafeRacerGarage 6 лет назад

Verry true :) Thank you for taking the time to comment John

@anidiotinaracingcar4874 5 лет назад

Tapered lines: awesome idea, your made is brilliant!

@tonyclausen8106 6 лет назад

Yes definitely yay for the subtle additional hump. Make up your resin and put a little bit aside, add microsphere blend to the rest to thicken up the mix, paint on a some resin first then add on the resin paste to form the hump. Sand back and fill accordingly.

@CafeRacerGarage 6 лет назад

thats a great Idea, sounds like you have done this before?

@Beachmangarage 6 лет назад

Looking awesome! I think it looks pretty sweet as it stands, but then again even the tape lines give it a great effect. I vote you make a second hump/seat using the mold and have the option of swapping them :)

@CafeRacerGarage 6 лет назад

Thank you for the kind words :) Will do

@johnkingston7244 6 лет назад

I think your designer pal has nailed it - and although it’s a little hard to see the lines accurately on video, picking up the top of the hump may give it a slightly better line with the top of the tank? Excellent work, a pleasure to see things done properly!

@CafeRacerGarage 6 лет назад

Thank you for taking the time to leave me a comment, you are right, Its going to be hard to see on camera but worth the extra work I think :)

@jishh 6 лет назад

Its a yay from me. Always one for trying things as you know!

@CafeRacerGarage 6 лет назад

Jish it’s amazing to see you pop up in my comments. Thank you brother 😊, Im really looking forward to seeing the footage of you at the show :) it’s so cool that for the bold is going also. Trust me I did think about getting a flight over :)

@grantwoolliams4762 6 лет назад

I think its a top idea, i want to make a scaled down version of the back of my tank for the hump ( R80) try using the plug , make a new hump and put two slits where you had tape , this will allow that gental rise nicely, re glass underneath and fill with bog . Good luck

@CafeRacerGarage 6 лет назад

That is a really good idea! it's kinda what I had in my head but not sure it will work yet, stay tuned because this is probably how I will do it :) Thank you for taking the time to comment Grant :)

@pkck97 6 лет назад

Great idea on the hump. If nothing else you can use paint on the tank and top of hump to keep continuity on the lines. Great video man. You're killing it.

@CafeRacerGarage 6 лет назад

Hi Peter, Thank you mate :) Yes you are 100% right, paint can achieve this look too, Im definitely going to have a go at making this new design and take a mould from thishump so I can create a few more cool ideas, so keep an eye out for those videos coming up, I'm sure you wont miss them :)

@ma-diy-skartechannel 5 лет назад

Yay for the hump design 👍

@alanbratton8357 6 лет назад

Looks great as is but those lines would look fantastic. Yay

@CafeRacerGarage 6 лет назад

I have to agree with you Alan Its looks awesome now but I need to make it just to see how it looks :)

@ethanmcleer4054 6 лет назад

Yay on the seat designs

@CafeRacerGarage 6 лет назад

Thank you mate, I will definitely make this new design and I even have a few more cool ideas coming up

@neilallinson4682 6 лет назад

Yes, I meant the centre section of the seat hump between the blue lines to echo the shape of the tank. I started watching your channel at episode 25 so I'm playing catch up now. I love the way you present your videos.

@CafeRacerGarage 6 лет назад

neil allinson thank you Neil. Yeah now I understand 😁 Don’t worry I’m sure you will catch up faster then it takes me to make them. Lol it’s a long process shooting and editing but it’s worth it and I love doing it

@bepponabuco7389 5 лет назад

Yay, Bro; do it!!!

@carltonolson6813 6 лет назад

Yay... That would make it look like it came from the factory that way👍

@CafeRacerGarage 6 лет назад

thank you mate :) that is hopefully how it looks when its all finished :)

@CK.projects 3 года назад

Thank you for your Videos. All the best

@garya3056 6 лет назад

Dan, she’s really shaping up nicely. I think you could accomplish the tank and hump match with a wild paint scheme just as well. Just my simple thoughts from 10,000 miles away! Thanks for a great video, Mate. 🏍👍🏍

@CafeRacerGarage 6 лет назад

Ma man Gary, Thank you for the ideas any Thank you for your always kind words :) I will definitely make this new design and I even have a few more cool ideas coming up like a full leather wraped hump :)

@garya3056 6 лет назад

Cafe Racer Garage sweet idea!

@ianvtonder 6 лет назад

I like the idea of the designer ! Think it would look pretty sweet 👍🏻

@CafeRacerGarage 6 лет назад

Thank you Ian, yes I think he is on to something and I will definitely make this new design and I even have a few more cool ideas coming up so stay tuned :)

@joepie221 5 лет назад

Nice work. I took my 750 in a different direction, but I appreciate the effort and skill shown.

@TheShagans 4 года назад

Definitely worth the time

@lovejoju1 5 лет назад

Yes mate, matching the tank lines would look awesome. Great job on the vids once again.

@CafeRacerGarage 5 лет назад

Justin Lovejoy I’m still yet to do this so stay tuned and I will be coming in a future video :)

@johnDukemaster 6 лет назад

Happy birthday! :-) Your friend came with beer...and a fantastic idea! Give him a kiss! ;-) How you do it, with colours or building up (or both?), is up to you maestro, the result will be out of this world!

@CafeRacerGarage 6 лет назад

Thank you John, I'm not sure how I will attack this yet, however, I will definitely make this new design, I'm thinking of doing a full leather wrap of the hump as well just a few different Ideas :) Such a nice comment John thank you :) Sorry for the delay in my reply

@johnDukemaster 6 лет назад

No worries mate, life's to short for complications! :-) Leather? Hmm...well you might surprise me! I think it's a bit "caveman". Maybe something new? What about rearlights in 2 rows, made of small pointy LED, from top to bottom? A bit more future! ...just a thought!

@waynemartinez8620 6 лет назад

I'd hate to make your project harder but I kinda like that idea of following the lines of the tank. The bike is coming along nicely, can't wait to see the finished product!

@CafeRacerGarage 6 лет назад

Its not at all making it harder Wayne, its a challenge and I love It :) Thank you for the great comment you made me smile

@darnyboy69 5 лет назад

Your a true teacher bro👍👍 respect 👊

@colcol172 6 лет назад

Do it mate, it would look awesome. And if you don't your going to wish you had and end up doing later on I reckon. Great vid

@CafeRacerGarage 6 лет назад

So true, Yes I will do it! great comment by the way

@stevemasters9539 6 лет назад

Looks great Dan, I would definitely go with the idea of following the lines of the tank, it ties it all in and takes it to another level! Just needs to be real subtle mate!

@CafeRacerGarage 6 лет назад

I hear you loud and clear :) you are 100% right!

@ellsvr6 6 лет назад

yay on the tank/hump idea

@antwolff1426 6 лет назад

Yes to matching the tail with the tank. Btw a cbr600 f2 rear wheel fits on the rear with only a few alterations (Bigger spacers). You can fit a 160/170 tyre on the 4.5 inch cbr wheel. Probs a bit too late now that you have already powder coated and purchased the rubber hah. Im doing the swap soon.

@CafeRacerGarage 6 лет назад

I do love this idea, maybe my next one :) send me some photos of yours, Id love to see them. Send them via my Cafe Racer Garage FB page as a message :)

@logikai 6 лет назад

Those tapelines make it look better. I would make an illusion in the paint to mimic those edges of the tank!

@CafeRacerGarage 6 лет назад

You are right this is a great Idea thank you :)

@tomprudhomme1032 6 лет назад

Nice tail section😉, I’m yay to match the tank. Maybe you can make a mold of the profile, and bond them onto the hump.

@CafeRacerGarage 6 лет назад

Thank you Tom, I'm probably going to make a mould of the entire part and so some different things to an entire new part to show how I do them to help anyone wanting to do the same :) You should see how cool is looks all painted in gloss black haha Oh hang on, you already did ;) lol

@TheYakkis 6 лет назад

Good idea,sir

@olrenison 6 лет назад

Looks killer. I think bringing the tank lines through the hump is a great idea. Would want to be subtle though I think. Nice work.

@CafeRacerGarage 6 лет назад

You are 100% right Thank you mate, I will definitely make this new design and I even have a few more cool ideas coming up

@dowser81 6 лет назад

She really is coming together and the seat hump mimicking the lines of the tank would be a killer idea i'm all for it. Please please please can you start to wear a mask when you are cutting and grinding fibreglass mate thats nasty shit if you get that into your lungs.

@londoncaferacer5816 6 лет назад

Looks amazing. A yay for me

@CafeRacerGarage 6 лет назад

Thank you mate and will do! :) Thanks for taking the time to leave me a comment

@londoncaferacer5816 6 лет назад

Cafe Racer Garage no problem mate. Love the videos. Giving me lots of inspiration for mine. Keep up the good work. Shame you’re not at bikeshed London this weekend.

@markchaloner2177 6 лет назад

Hey man. The idea of running the tank lines back to the hump sounds class!! Would love to see how it turns out! 👍

@CafeRacerGarage 6 лет назад

Thank you mate, I will definitely make this new design and I even have a few more cool ideas coming up too :)

@MidwestMotoRider 6 лет назад

Its turning out fantastic! Yes I like the idea and I think you should modify the tail, Ride safe!

@CafeRacerGarage 6 лет назад

Thank you mate I love to get comments like this, makes it so worth every second I put into the shooting and editing :) Got your vote and I will happen so stay tuned for that video :)

@ThePistolero35 6 лет назад

Yea for sure !

@CafeRacerGarage 6 лет назад

Ok will do. Thank you for the comment :)

@neilallinson4682 6 лет назад

I watched your video as I'm doing a similar hump with a raised centre section so I vote you do a second plug with raised centre section so I can learn from you. Overall profile of the bike looks great.

@CafeRacerGarage 6 лет назад

Thank you mate, I'm unsure what you mean by raised centre section? Do you mean the seat pan to be higher?

@simondienis2448 6 лет назад

Looks already very nice but whit the part of the end make like the tank will be awesome ,)

@CafeRacerGarage 6 лет назад

Thank you mate, I will definitely make this new design and I even have a few more cool ideas coming up

@MotoGoato 6 лет назад

Yep on the tank lines copied on the hump ... that would look sweet!! Even with just the tape there you can see it'll tie in and flow really good. As others have said, you could even do it with paint and give the hump just a visual effect of having the slightly raised center section. Coming together real nice now man :) Looking forward to seeing what you do with the rear footrest hangers, air filters and exhaust .. I know that'll all be coming soon ;) Oh and clocks as well ....

@CafeRacerGarage 6 лет назад

Thank you mate, I have loads more Ideas still to come. :) As for the rear-seats and the exhaust, they are parts I'm still trying to work out, Im currently trying to find an aftermarket exhaust for this bike to get the 4 into 1 pipes so i can wrap them to the junction and custom build the rest.

@HoleyJoeEngineering 6 лет назад

Happy belated birthday! I think it will be worth the work of adding the lines to your hump. Little details like that are what makes your bike unique. As for the painting, I think you should give it a go yourself, you've got the patience and the talent required to get a great result. the key is to put on enough clear to be able to cut and buff out the orange peel and dirt.

@CafeRacerGarage 6 лет назад

Thank you for the kind words Joe, you are a great guy, I really like that we have the ability to build amazing machines and make them unique just by adding little touches as I know you do the same on your builds, getting little ideas and inspiration from each other is what its all about, I hope my videos are of help to you in some way :) Thanks again for the birthday wishes.

@HoleyJoeEngineering 6 лет назад

Your videos definitely do help! Inspired me to start working on a removable seat hump of my own :)

@markssmallengines3542 6 лет назад

Thats awesome mate. Its great to see another fellow aussie on youtube 😁 i think a nice custom pinstripe following the lines of the tank an down the hump would look great but with your skills matching the hump with the tank would look killer and look factory made. Great job an i will look forward to seeing her compleated. Cheers Mark

@CafeRacerGarage 6 лет назад

Thank you Mark :) yeah I'm definitely going to make this new design and I even have a few more cool ideas coming up, what location are you in? I'm on the Gold Coast, I have a lot of subscribers that are Aussies from all over :) thank you for your encouraging words, Its honestly amazong comments like this that keep me going

@markssmallengines3542 6 лет назад

Cafe Racer Garage thats great, i see alot of american channels but not alot of good aussie ones like yours. I like biker bits aswell which is about everyday bike, camping an mancave stuff. I'm in victoria in a town called kilmore. I love Queensland there is so much to do there. I have been up there on the goldcoast a few times an its beautiful. Planing on an adventure trip following the coast from here to the tip of aus 😁 your new design an ideas will look awesome mate great work, i know its time consuming but well worth the effort 😁 cheers Mark

@CarloRae 5 лет назад

Super awsome! Ive learned a lot. Thank you from the philippines!

@CafeRacerGarage 5 лет назад

Carlo anthony Reodique Morando always welcome my friend:)

@mariopaes7872 6 лет назад

Yes, great idea. Now, modify the existing one or make a new one from the start... both are great options but from start would be cleaner

@CafeRacerGarage 6 лет назад

yeah I'm definitely going to make this new design after making a mould of this hump. I even have a few more cool ideas coming up so stay tuned and thank you for your comment

@outonthetracks 6 лет назад

Hey Dan. Looking good as it is but I do agree with some of the other comments that following the lines from the tank would look awsome. Touches like that always set a build appart from others. Perhaps you could use the mold you already have to play around with different profiles rather than muck about with the one you've done? That way you can have different looks for what ever mood you're in! As always, love ya work.

@CafeRacerGarage 6 лет назад

You said it perfectly Ian, I will take a mould from this one and create a few different looks, I even think a fully wrapped leather hump will look awesome :)

@stefankrgovic2167 6 лет назад

A definite yay.

@CafeRacerGarage 6 лет назад

Thank you Stefan :) making a mould of this whole tail section to do this and keep the original

@stefankrgovic2167 6 лет назад

Cannot wait to see it! I am so glad Taylor from Classic Octane sent me here, you are a fantastic builder and a superb guy.

@CafeRacerGarage 6 лет назад

Stefan Krgovic thank you mate :) any question just ask. Feel free to throw any of your ideas in the comments I reply to everyone 😊

@fader2701 6 лет назад

yeah the tail bit holding that line from the tank i think would look great

@darnyboy69 5 лет назад

If you ever do another half hump please do a vid on a removable hump( hornet's nest) nice work brother

@dmasterson12 6 лет назад

Seat hump looks great. Adding that extra hump to match the tank would be cool in theory i just dont think it would look better then what you have now.

@tiexgrr 6 лет назад

Adding the detail from the tank would be worth the effort, though you could likely mimic it with paint. That said, the effort required for the paint is very likely more than with fibre glass. Keep up the awesome work man!

@CafeRacerGarage 6 лет назад

So true, Its going to be fun making a few changes to a new hump so i will take a mould from this one and make a start soon I hope :) the CX Scambler took up some time but than again Im not really in a hurry lol

@TheYakkis 6 лет назад

You'd better not stop building bikes. The lines on this thing are so good that i can't even watch other builds on other channels because they are sub-par and it drives me insane. Oh well, i suppose that's what happens when the bar is raised. As far as the hump lines, i'd certainly be interested in seeing it done, but I'm not the one doing the work. What you have now looks excellent . If you decide to do it, making a new hump and comparing the two would be your best bet. Hell, show your buddy how to make it ;)

@CafeRacerGarage 6 лет назад

This would have to be the most amazing comment I've had! The comments like this keep me so motivated to share more of my build, so a big thank you to you brother :) I will make the new hump with the lines and how I plan to do it is first making a mould from this one and than making few new humps to play with some other cool ideas i had, just so I can share the process on video and help anyone else wanting to do the same :)

@dannyneill8101 6 лет назад

Yes. Yes. Yes. Can always grind it off if you don't like it.

@CafeRacerGarage 6 лет назад

Hahaha this made me laugh but you are right :) Im actually going to take a mould of this whole tail section to make a few more cool hump styles so stay tuned and thank you for your comment Danny

@richardforrest5781 6 лет назад

Yay. Match the tank

@CafeRacerGarage 6 лет назад

I hear you loud and clear :) thanx for the comment brother

@ChrisDalvikBxl 6 лет назад

a yay or a nay? YAY!

@CafeRacerGarage 6 лет назад

Chris Dalvik thank you mate :) It’s starting soon

@ChrisDalvikBxl 6 лет назад

Cafe Racer Garage awesome mate! I recently discovered your channel. Love your work! Keep it up

@k1m625 6 лет назад

Having those lines flow will make it look really consistant alternatively you could possible follow those lines with paint to achieve a similar outcome

@CafeRacerGarage 6 лет назад

Yes you are right, and the paint idea is a great Idea thank you :)

@CafeRacerGarage 6 лет назад

You are right and i may do this but a also wound like to create the extra hump because I love it :) The amazing comments keep me going :)

@k1m625 6 лет назад

alot more extra work bro.....totally worth it though.....getting the proportions right will make ALL the difference

@MikeMiller-fc2cc 5 лет назад

Another thing take your emblem mounts off the tank, and put them on the hump. To be different small changes get appreciated more.

@DC73rr 6 лет назад

Yes! I hate to encourage the work. But, in the end. I think it will be worth the effort. Your ride will stand out.

@CafeRacerGarage 6 лет назад

Haha you just want more videos from me lol :) Thank you mate, I will definitely make this new design with a few more ideas still yet to come :)

@DC73rr 6 лет назад

To be honest. I own a 2001 Honda VFR800Fi. Presently, I am turning it into a naked/cafe/scrambler (Something I like. I hate labels.) Basically, I wanted a new look. So, I decided to get rid of the plastics. As part of the process, I will be making my own custom seat. The seat is for a Ducati 916 subframe (That, somehow, I mounted to the Honda). I.m learning a lot from you. Thanks.

@CafeRacerGarage 6 лет назад

Thank you so much Nick, I love to share my process and my builds but the part I love the most is the amazing guys like yourself that are leaving me such incredible comments, Im honestly so grateful that you take the time to drop me a comment and its the main thing that keeps me motivated. I post one video a week Sunday or Monday. 2001 Honda VFR800Fi. is a very unique bike to turn into a naked/cafe/scrambler, Id love to see a picture if you would like to pm me and drop me a picture on the Cafe Racer FB page

@OlieBurton 6 лет назад

I would do it! It would tie the two together so well and would be something very unique.

@CafeRacerGarage 6 лет назад

You are right :) thank you for the comment and vote Olie :)

@charliepower2032 6 лет назад

Great video as per usual👍🏽. I think the line idea would suit it better in my opinion. Keep it up 👍🏽

@CafeRacerGarage 6 лет назад

Thank you Charlie :) you are 100% right, I will do the new design and even a few other changes on a different hump :)

@sebastianvonfreymann2930 6 лет назад

Yay!

@CafeRacerGarage 6 лет назад

Thank you. yeah I'm definitely going to make this new design after making a mould of this hump. I even have a few more cool ideas coming to

@leechamberlain1273 6 лет назад

Great series , look forward to the videos . Personally I would get rid of the lines on the tank , I think the tank looks high compared to the seat . Just my opinion still think the bike is going to look fantastic when finished . Cheers mate

@CafeRacerGarage 6 лет назад

Thank you Paul it's nice to get different feedback :) Have a great day.

@Mohannadzah 6 лет назад

You can make the illusion of the design using different colors, I mean if you choose other than the black

@CafeRacerGarage 6 лет назад

That's a very good idea. Thank you Muhannad :)

@Mohannadzah 6 лет назад

My pleasure :D

@TheYakkis 6 лет назад

You could even do a flat black with a gloss black stripe

@wilmertobar7619 6 лет назад

Good

@99odo 6 лет назад

You could just add some pin strips or colour change on top to match the lines of the tank.

@CafeRacerGarage 6 лет назад

Very true thank you for your comment and Idea Ross :)

@stuartnicholls7592 6 лет назад

yay

@CafeRacerGarage 6 лет назад

Thank you Stuart :)

@francomdl 6 лет назад

leave it as it is!!

@CafeRacerGarage 6 лет назад

Thank you mate, :)

@francomdl 6 лет назад

beaufitul craftsmanship man. It is also so good watch your videos and advise. Keep going!!!

@bintangsena2249 6 лет назад

Yay ;;)))

@CafeRacerGarage 6 лет назад

Thank you mate :)

@colintaylor3640 6 лет назад

It's got to be a yay for the lines mate

@CafeRacerGarage 6 лет назад

Thank you mate, I will definitely make this new design and I even have a few more cool ideas coming up so stay tuned :)

@lcrgarage3245 6 лет назад

More work and time, but would flow really well with the tank.

@CafeRacerGarage 6 лет назад

I agree with you brother, thank you :)

@MikeMiller-fc2cc 5 лет назад

YEAH, match the tank lines, make them blend into nothing like the tank

@pinchnsqueal 6 лет назад

I don't see how you have a choice. Matching the feature on the hump is a great idea. If you don't do it, that will be all you ever see.

@CafeRacerGarage 6 лет назад

You are 100% right :) thank you for your comment my friend :)

@markmaier8733 4 года назад

Great video and nice work. How do you attach the seat and hump to the frame? Thanks

@sjb59 6 лет назад

Yay

@CafeRacerGarage 6 лет назад

Thank you :)

@JeffreyTre 4 года назад

Hey boss quick question. I just bought a 2000 zx6e. I want to make a cowl that'll just sit over the back seat is it possible and how could I do that?

@jakewalters8482 6 лет назад

How does the seat pan, and hump mount to the bike?

@CafeRacerGarage 6 лет назад

Great question, Its held in with one bolt at the back and hooks under the tank at the front. :)

@robertciganovic965 6 лет назад

What kind of foam do u use for shapeing the seat

@CafeRacerGarage 6 лет назад

Robert Cig here you go mate :) Foam for shaping (Same density as pink foam) amzn.to/2sB8eDZ Any questions just ask.

@robertciganovic965 6 лет назад

Cafe Racer Garage thank you for responce

@THESICKSILVERADO Год назад

Do you make and sell these seat pans/ hump?

@CafeRacerGarage Год назад

No, unfortunately at this stage I don’t

@trentjarvis1233 6 лет назад

I think leave it. I don’t think it worth I it for the little lines

@CafeRacerGarage 6 лет назад

Thank you mate :)

@hwntwww 3 года назад

everything has too many episodes

@CafeRacerGarage 3 года назад

Unfortunately I can’t please everybody but I do my best to try and show as much of the process as possible to help anybody else who wants to build a motorcycle and learn some new skills. Have a great day