Calibrating Z-Offset With A BLTouch Bed Levelling Probe

Подписаться 109 тыс.

Просмотров 632 тыс.

50% 1

The first 1000 people to use the link will get a free trial of Skillshare Premium Membership: skl.sh/3dmn03211
ANTCLABS BLTouch aliexpress store: bit.ly/2zfNxT8
Matterhackers Orbit: bit.ly/2zpD7Q0
BLTouch:
Amazon UK: amzn.to/2ieTBQz
Amazon US: geni.us/BLTouch1
For the latest discounts and codes on 3D Printers from gearbest, check out the following link: bit.ly/2iD5eRu
Anet A8: bit.ly/2oeGjZh
Use Code:
US: GBA8US $139.99
EU: GBA8UK31 $149.99
Z-Offset Instructions:
1. Home 3D printer
2. M851 Z0 - Reset Z0Offset
3. M500 - Store setting to eeprom
4. M501 - Set active parameters
5. M503 - Display Active Parameters
6. G28 Z - Home Z Axis
7. G1 F60 Z0 - Move nozzle to true 0 offset
8. M211 S0 - Switch off soft endstops
9. Move nozzle towards bed slowly until the paper can barely move
10. Take note of the Z on the printer display (take that number and add the measurment of the calibration sheet or device used)
11. M851 Z X.XX (X.XX being your z offset achieved)
12. M211 S1 - Enable Soft Endstops
13. M500 - Save settings to Eeprom
14. M501 - Set Active Parameters
15. M503 - display current settings
Sponsor - Filamentive Filaments:
EU: bit.ly/2seGi6e - use code 3dmakernoob for 15% discount
US: amzn.to/2rGv89u - use code 3dnoob01 for 15% discount
----------------------------------------
Discount Codes (Non Affiliate):
FormFutura Filaments: bit.ly/2xlBxLo
Use Code: 3DMAKERNOOB-FFT (15% off)
3DPrintz: 3dprintz.co.uk/
Use Code: 3dmakernoob (10% off)
-----------------------------------------
Please consider using the following links to make your online supply purchases for filament or 3d printing accessories, it will not cost you anything extra but will go a long way to help support this channel.
Matterhackers: bit.ly/2mH1jHx
Aprintapro Filaments: bit.ly/2ulNvG2
Amazon US: www.amazon.com/?tag=3dm04-20
Amazon UK: www.amazon.co.uk/?tag=3dmano-21
Aliexpress: s.click.aliexpress.com/e/iYv3ZjM
Gearbest: bit.ly/2m3n0xL
Banggood: bit.ly/2lEVsCO
Should you wish to support me, you can also do so via Patreon: / 3dmakernoob
Want to send me something? go ahead:
Attn: 3D Maker Noob Joe
P.O. Box 12
Constitution Street,
Mosta, MST 9059
Malta
Europe

Наука

Опубликовано:

30 окт 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 962

@brickshitter8015 2 года назад

I know it's been years since you posted this, but I really love this video. I find myself coming back to it periodically when I have to recalibrate my printers. Thank you for not only taking the time to make this video, not just for explaining each step so we're not blindly following instructions, but for making it entirely generalized: anyone with a BLTouch and a Marlin printer can make use of this and it's wonderful. 10/10.

@mikezets 6 лет назад

After days of unsuccessful attempts to get my BLTouch to work, YOU finally got me through it with my sanity intact. THANK YOU FOR THIS VIDEO!

@ClintHart 4 года назад

Perfect! Thank you. I have used this several times on many printers. Most recently with the Ender 5 Plus that I installed the new silent board on.

@dleivam 5 лет назад

Thanks man.. I installed a bltouch on my ender 3 and I couldn't set the z offset correctly after several attempts but thanks to your video now I can print correctly.

@jbrondos 4 года назад

This was a "lifesaver." Thanks so much! I am regaining my sanity.

@MarinusMakesStuff 4 года назад

This video is super. I always forget the sequence and have redone this about twenty times now on a few of my 3D printers. Thanks so much for your efforts :)

@TYGAMatt 4 года назад

I've kept threatening myself to use this guide, and just did so with my CR-10 Max. Please take a bow Sir. Fantastic. Very easy to follow and superb results.

@SheepLPMC 4 года назад

I struggled witj my sensor an literally spent around 7-10hours to make this damn thing work. Finally your video did the job! Thank you!

@rippengedoengel 3 года назад

Propably one of the best videos for Z-offset, if not the best. Thank you so very much

@fengsight 4 года назад

Great video. If anyone else is coming back to this guide for a refresh of the commands, here's the step by step. Calibrating Z-Axis 1) Home your Z axis 2) M851 Z0 // Reset Z offset to 0 3) M500 // Save to EEPROM 4) M501 // Set EEPROM 5) G28 Z // Home Z only 6) G1 F60 Z0 // Move to Z = 0 7) M211 S0 // Soft endstops off 8) Paper technique with z change to figure out correct Z0. M114 to get current pos 9) M851 Z [current Z position including - if it exists] // Set z offset 10) M211 S1 // Softenstops back on 11) M500 12) M501

@mizzymankannon4469 4 года назад

I was just going to type these down for the little cheat sheet I'm making but here it is. Thank you!

@ewaynetm9261 4 года назад

HEY MAN MY NOZZLE DOESN GET CLOSE TO BED AFTER DOING YOUR STEPS, EVERYTIME I DO HOME OR START A PRINT IT HOVERS OVER THE AIR ABOUT 2MM PLEASE HELP I HAVE CR10 S5

@Franx1122 4 года назад

@@ewaynetm9261 mine too i have a ender 3 pro

@ewaynetm9261 4 года назад

@@Franx1122 hey I was able to fix mines with pronterface

@ewaynetm9261 4 года назад

I followed this guide multiple times untill it worked now my printer is printing like a pro. Good luck

@billbarndt741 3 года назад

I can't thank you enough for posting this! I have been out of commission (unable to print) for a week already. I was getting very close to removing the BL Touch and just going back to leveling the bed manually. THANK YOU!!!

@JacquiDoyle501 5 лет назад

Hi Joe, Thanks for publishing this. I have lost count of the times I've referred to these instructions, as they're a Never-Fail way for me to calibrate Z Offset! Thank you so much!

@gregsteele8306 6 лет назад

Worked perfectly. Thank you for this tutorial. You saved me a ton of frustration!

@leeroybaggins9561 5 лет назад

THANK YOU SO MUCH!!! someone that finally dumbed it down to an understandable level!

@jamescullins2709 4 года назад

finally have my CR-10 bed leveled, getting good adhesion over the full bed. Best instructions I have seen so far, Thanks

@jenniferguymon7569 3 года назад

This video was a lifesaver for me and my CR-10 Max. It's built so much differently than the other CR models, none of the generic hot ends work quite right, so you have to follow your instructions here as well as change the location of both the BL touch and the mounting position of the hot end. Thank you!!!!

@ModBotArmy 5 лет назад

This video has come in handy so many times. Great job :)

@iamkaioken 3 года назад

Oh man, just got my bltouch and z offset dialed...WOW. THIS IS THE BEST FIRST LAYER EVER....

@supawiz6991 3 года назад

Got my first printer (Ender 3 pro) Back in October. Found this video when I added the Bltouch a month later and have used it multiple times since, recommended it to others and have added it to my 3D Printing playlist. Thanks for the awesome tutorial!

@maxmairena6021 4 года назад

OMG man you are a the savior of the nozzle printer crasher. I just follow every step of your video and my printer is finally printing correctly and the nozzle is not crashing in to the bed. Thank you so much for helping us with your videos! 🙏🏼✌️

@Anarasha 5 лет назад

Dude I owe you a beer. This is amazing, I used to spend so long trying to find the right offset

@NickMartinez 4 года назад

Same man. Two weeks I struggled. This guy is a God.

@jim.c6780 6 лет назад

thanks for the Z offset instructions I did not know how to turn off soft end stops great video thanks Joe keep up the good work.

@3DMakerNoob 6 лет назад

+jim. c you’re welcome buddy :)

@thorstenengel5912 3 года назад

This video is great. Had nothing but problems with my Ender3 and the BLTouch. After following your instructions I have a perfect first layer all around the bed. Thanks a lot!

@Cryocide 6 лет назад

Thank you for making this video. It worked perfectly for me and my Prusa i3 clone with an inductive proximity sensor. There plenty of videos out there about this subject, but many of them, including Tom's, skip over that VERY important M211 command. That was exactly where I kept getting stuck.

@Bexxy 5 лет назад

Thanks so much for this, it helped me resolve the issues I was having. Nozzle was crashing into my bed because it had an incorrect Z Offset of -6.60mm! I had no idea this setting was in eprom on my CR10S Pro. Thanks

@Spooqy. 4 года назад

Andy Bexx how’s it been since? I’m having the same exact problem with my cr10s pro.

@marekparnell3971 3 года назад

Many thanks for this very clear and concise video. You saved me a lot of headaches as I had been messing around with the Z offset for days after I installed a new V4.2.7 mainboard on my Ender 3 Pro (with BLTouch) and I was getting nowhere fast. For those with the same printer as mine (and with the V4.2.7 mainboard), for some reason the display does not show the Z offset but you can use the M114 command line in Pronterface to get the Z offset value.

@userskorea 3 года назад

wow.. idk how many guides and vids I went thru misery... this is by far the clearest and most informative video of all offset probe calibration:) thank you so much

@brendan1495 3 года назад

Been messing around for hours trying to get this right, followed your directions and had it working in 5 mins, thanks for the brilliant tutorial

@watchdogpedro 4 года назад

Just a perfect job of going through the process, a real find after lots of searching to listen to this video Nice Job

@evghenix 5 лет назад

The thickness of the measuring device (paper) is 0.1 as author said but in the video author added just 0.01 (2.49 + 0.01 = 2.50)

@quinxx12 3 года назад

yea I'm also confused. so the actual offset should have been -2.59?

@PaganWizard 3 года назад

I think he just misspoke, meaning to say .01, kinda like he misspoke again at 5:23 when he said "click on homo" when he meant to say home.

@mikembley 3 года назад

@@PaganWizard You might have thought he mispoke, but you misheard, sounded like he said "home all"

@nicholasblumling2117 3 года назад

@@PaganWizard this is incorrect because 0.1mm is indeed 0.00393 in. which is the equivalent thickness of a piece of paper, so no, still confusing

@mattyoutube6454 3 года назад

@@nicholasblumling2117 this is driving me nuts - the most important part, and it's explained incorrectly, lol

@rizzocow 3 года назад

Thanks for this. Super easy and took less than 5 mins watching this video to not only set the Z-offset correctly but understand the how's and the why's. Perfect for this noob to 3d printing.

@garylovesbeer 6 лет назад

Hi Joe, thanks for the clear and concise instructions. I was pulling my hair out as I could not get the nozzle below Z0 until I followed your vid and saw the M211 command. I had gone to the extent of tuning off this command permanently in the firmware which wasn't clever. Also these instructions were a lot more logical than other instructions tendered elsewhere. Again thanks for making the time to do these fantastic videos. Bravo.

@fire051 6 лет назад

Thanks, but don't forget add right G-codein cura G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 G29 G92 E0 ;zero the extruded length G1 E3 F600 ;extrude 3mm of feed stock G92 E0 ;zero the extruded length again G1 F{travel_speed} M106 ;fan on M117 Printing... thanks to Natan Kozerev

@michaelm.wiseman282 3 года назад

If you set it in the EEPROM I don't think you need to add any code.

@bigbernie23 5 лет назад

Hi Joe! Great job done here, it summarizes in a few minutes what you can partially read o see in some videos and blogs but I couldn't find the whole story in one single brief place like you do here. Great job. I'd probably suggest two small adds, if you think are accurate. One is to always remark that all this operation has to be done with bed and extruder at operating temperature! Some might skip this part and all the work will have no value once it gets to print, right? Second thing, that it drove me nuts after instaling my BL Touch and upgrading to Marlin 1.1.8 is the M420 S1 command. I tried and retried and my first layer was still skewed only to find out that by default (at least on my case) the auto bed level was off (which you check with a simple M420). The simple solution was to add a M420 S1 after the last G28 on my printer settings commands, but nobody seems to talk much about it and all the auto bed leveling is useless unless you ensure you have the feature turned on. Do you agree? Do everybody need that or was it just me? Best regards and again, congratulations on this video.

@rraymakers 5 лет назад

@@cordellabney This behavior has now been clarified in the Marlin documentation.

@rfc1795 5 лет назад

Thanks a lot! Turns out mine was also off!

@Soligniari 5 лет назад

Awesome video! Your clear explanation of things allowed me to get my printer up and running in no time flat. Thanks!

@sledgehammer7998 4 года назад

This video is BEYOND helpful, its much more than I was hoping to find but really happy that I found it. As soon as I get home I am going to get this finally done. Thanks again for an AWESOME video!

@mariomoreno6754 4 года назад

Great video but z - 2.49 + 0.1 (paper) = - 2.59 not how you spell it - 2.50

@natewallis1 3 года назад

actually that is 2.39 ...-2.49 + .1.... should we be adding or suubtracting it?

@afkafkafk 3 года назад

Bigger negative is closer to bed, so you need to do the operation to increase the negative, in this case subtract

@galacticgaming8036 Год назад

In simple terms if it’s -10 it will be farther but if its -1 it will be closer

@RichardBronosky 2 года назад

This is BY FAR the best Z Probe Offset video in existence. Thank you so much for doing this! The only critique I could make is that I wish you had shown how to do everything with the pronterface serial/CLI interface. It's pretty easy to do if you use `G91` to switch to relative position/motion mode, and use `G0 Z-0.1` repetitively to close the gap. Then use `G90` to switch back to absolute position/motion mode. But as is, this video can serve as a "model/manufacturer independent, all pronterface, no LCD/TFT/Dial/Touch" method for everyone. And for that, I thank you. (--Daniel Tosh) ☮❤🌈🧘🏽🕉☸☯

@chetking1116 Год назад

I agree. I always come back to this video every once and readjust my z offset on my E5.

@hpynoodle 2 года назад

I just want to reiterate how helpful this video is. I've used it 4 times now. I was ready to throw my Ender 5 Plus out the window until I found your video. Thank you so much for creating the video and making it easy to follow. :)

@greag1e 5 лет назад

As of today, this video is still relevant. I thank you dearly dear sir. This was out of my scope of knowledge and you did a great job explaining. The M211 commands were not recognized on my end, but it allowed me to still lower, I guess I don't have soft endstops anyway, everything else was spot on. just did a bed level print with BL touch for the first time and it was awesome. Again, thanks.

@drinklifeup 4 года назад

Just so everyone is aware, a piece of paper is more like .1mm. You said it right "zero point one millimeters" but you added .01mm to your z-offset.

@JacksterTV 4 года назад

Noticed that aswell... common mistake. Otherwise great concise and clear video. I prefer to have the machine set to the paper thickness and substract it in my start g-code keeps the nozzle from damaging on glass beds.

@acestu 4 года назад

Me Too, so it should be 2.49 + .1 = 2.59 right ?

@drinklifeup 4 года назад

@@acestu Yeah whatever your z-offset is add .1mm

@drinklifeup 4 года назад

@Johnno9999 I just responded to this 3 months ago when I watched the video. I'm sure the author has moved on since then. Otherwise I found the video to be exactly what I needed and very informative.

@kornboy8262 4 года назад

@@acestu So if it's -2.49 and you need to add .1 then it goes to -2.29 right?

@Mr_Gadge 4 года назад

This video has been referred to a lot by me lol, it's great! Now I'm into marlin 2, and I follow every step (mini e3/ender3/2.0.1Marlin) it always seems to IGNORE any z offset?? I'm going slightly insane. I've set it this way, and the lcd, soon as I home again it's too high. Set it yet again through terminal in octo, home, back too high again. Circles. I have real memory issues but I'm missing some real basic thing here. EDIT: Marlin bug it seems, lots are saying this.

@robertavery8897 3 года назад

I’m having the same issue right now. Did u ever resolve it. My printer is printing great ... just don’t want to screw it up chasing the bltouch issue. Later

@Mr_Gadge 3 года назад

Robert Avery it was a fault in marlin, fixed in later editions.

@jeffj4528 6 лет назад

Joe, thanks for this. Got my self leveled perfect!

@ragnaroket Год назад

This is the sole guide that I could wrap my head around and one that I find myself coming back to time after time when I need to calibrate my offset. Thank you so much for this!

@franskeeman223 3 года назад

there's something i don't understand, great video btw. but when you say you have 2.49 and add the paper 0.1 doesn't it have to be 2.59? i am confused a bit?

@KevinPawsey 3 года назад

me too... been looking at all the comments, a few people have picked that up, but I haven't found an answer so far though... will reply again if it was answered

@kemppetersen824 3 года назад

OP did confirm (2017 reply) the error; correct setting for this example is 2.59

@nghin4vacsf 5 лет назад

Thank you for a very helpful tip on the topic. There is however a question concerning the adjustment for the paper thickness at time 4:20 where you execute the command M851 Z-2.50. Shouldn't it have been Z-2.59 instead? The manual Z adjustment yielded -2.49, then you added the paper thickness of 0.1mm.

@px1690 5 лет назад

That's what I thought as well but hey might be very very thin paper he was using ;-) But all jokes aside, it's more the process that counts not really the actual figures.

@davidvelozee 4 года назад

That’s what I was thinking, that would leave it off the bed by 0.09mm. And the paper I measured is actually 0.07mm not 0.1mm. But I’m still setting up so have no idea what I’m talking about..

@x0atm3alx 3 года назад

from what Im understanding is this procedure measures the offset of the BLtouch from absolute zero of the nozzle touching bed so you have to add the adjustment from the bed to nozzle using the paper for proper distance.

@Grumpyoldtwit 3 года назад

@@x0atm3alx Yes, but in the video, he added 0.1 to 2.49 and came up with 2.5, which means he only added 0.01 for the paper, not 0.1.

@Awesome_O_2000 Год назад

Happy to see this comment. Was thinking I was crazy :P

@CraftHound22 2 года назад

Man I searched and searched and this was the video that made it simple and clear. I then realized how old this video is. Thanks for taking the time to make this video, I subscribed and am looking forward to looking through your videos.

@johngreene4396 4 года назад

New to 3D printing and just got a BLTouch for my Ender 3. Your guide is refreshingly concise, cheers...

@strike171 3 года назад

Wish I did this before I scratched my bed up

@librarymark 3 года назад

Yeah, me too. On the bottom of everything I print is the outline of my screw-up!

@bootblacking 3 года назад

Scratches are just a little memento mori. Grow beyond your mistakes but remain humble.

@ezearo 2 года назад

Haha noobs

@strike171 2 года назад

@@ezearo everyone starts somewhere

@d1agram4 2 года назад

I scratched 2.. this is insane.

@alejandroperez5368 5 лет назад

Why am I only getting "echo:busy:processing" when I send commands to my printer (even homing) ??

@thebestempty 4 года назад

That should go away once the command is executed. So, after homing is complete it will stop sending those messages.

@aaronlabeau1007 5 лет назад

This video is one of the best videos I've ran across on the subject. I used OctoPrint and your directions worked amazing!

@dr1v3r1965 5 лет назад

Great tutorial, you are very well spoken, clear instructions and just what I need to get my printer back on track, I will try this tomorrow morning... thanks for the video and keep up the good work!

@The_Adm_Jachov 3 года назад

I've tried this process 8 times now, I'm having absolutely no luck with this. I've tightened down all 4 springs and re calibrated Z Offset and still the nozzle doesn't come down to the bed close enough to put a good first layer down..

@bruhboi554 2 года назад

Use the z step in tune and then lower it

@wolff000 2 года назад

@@bruhboi554 This is the way. I had the same thing happening and tuning while doing a test print solved my issue.

@wattsnb 6 лет назад

Hi Joe. If the initial z adjustment was -2.49mm and the paper was 0.1mm should the adjusted figure not be -2.59?

@3DMakerNoob 6 лет назад

+Neil Watts well spotted Neil. In fact it should be -2.59 apologies, almost 1am lol it did work in the end for me as I pushed the nozzle down to the bed more than the thickness of the paper

@wattsnb 6 лет назад

3D Maker Noob. Great vid and always love your channel. One of few I subscribe too 👍

@thelookingglass1737 6 лет назад

Was about to mention the same, good thing I decided to read the comments first! Average paper is indeed .10 but lately I've been getting all sorts of irregular sizes so I've decided to move off to feeler gauges. So, say I'm using glass? i subtract the thickness of the glass + the paper (feeler gauge)? Great channel you got going here. Thanks for all the work and effort. Cheers

@PlugHideous 6 лет назад

did subtract the thickness of the glass + the paper?

@TheVexatus 6 лет назад

Feeler is more precise - if for isntance the .15 fits in under your nozzle and .2 doesn't means you've got no more then .05 of an error.

@roamin_ronin 4 года назад

Thank you SO much. I wrestled with this ALL day. It was the M501 M503 that was messing me up. This was great. Subbed and bookmarked.

@fimmerson 3 года назад

Beautiful video very clear and straight to the point. All other YT instructional videos should take notes here this was a VERY well done video and is on a FAV list for sure. Thank you so much for this.

@bkpickell 6 лет назад

I'm confused. In the video you said you add the thickness of the paper ".1" to the z position "-2.49". If my gradeschool math doesn't fail me the correct answer is -2.39 not -2.50 nor is it -2.59 as some others have stated. Or did you misspeak by saying add when you meant subtract?

@kenniclown3103 5 лет назад

Shouldn't -2.49 + -0.1 = -2.59?

@LeandroSehnemHeck 2 года назад

Everytime I see this video I am more confused. At least someone is asking the right question. What is wrong? The calculation or the paper thickness?

@AceticWolfe Год назад

This has fully resolved the issue I have been having with my CR-touch on my updated Ender 3 Pro. Thank you much.

@stephenelliott95 Год назад

Thank you, just upgraded my printers with BLTouch and 3DTouch and this was invaluable.

@Tarzan33 4 года назад

I've followed these steps exactly, but every time I check by hitting home, then move Z to 0, it ends up stopping above the bed in the same position it was prior to starting the process. Could there be anything else making it not save my changes?

@butcharuski 4 года назад

Same for me.

@lukepalmer7459 4 года назад

@@butcharuski Same here...

@fernwehmind 4 года назад

Same..

@rayropes 4 года назад

Same here. I have an ender 5 pro.

@bjork74 3 года назад

Late reply, but if someone's reading; Try storing the offset directly on the printer instead, not in Pronterface. Worked on my Ender 5 Pro.

@daleward2229 6 лет назад

I don't have a display how do i see the position?

@StoicKiwi 5 лет назад

I used the command M114, which showed all current positions!

@adamhuskey8688 4 года назад

Been fighting with this printer for days! Thank you so much!

@davevil8750 5 лет назад

I just got a 3d printer for the first time and this video was exactly what I needed. Thank you very much!

@robertavery8897 3 года назад

Well .... went through the process on my CR10S Pro. Your setup is right on and it works. Just one problem with a printer like mine. The setup on the screen does the same thing. It will override the setup you recommend and re-establish a new set point. So ... I really appreciate you taking the time to present this ... it’ll definitely work out on the printer I’m building. Worth learning this. Thanks.

@markoantonjo 6 лет назад

It was extremely useful and so FINALLY I could setup my BL TOUCH! Thanks a lot for this video, Noob. Greetings from Sao Paulo, Brazil.

@ellyonartgaming Год назад

This was the most helpful video ever. I had BL touch on my old 4.2.2 motherboard and I just had some issues with my printer so Creality sent me 4.2.7 upgrade. It so silent, however I couldn't probe the Z into minus. This video is so easy to follow, straight forward for a newbie like me. Thank you so so much! P.S. Higly highly recommend upgrading motherboard, I don't hear a sound while printing except fan.

@rachnaram8722 3 года назад

you saved me! spent hours and days troubleshooting until I felt I was going mad! This has fixed everything and now no glue needed at all!

@danielparis5884 2 года назад

Hi. This video has been absolutely great for me. I have been struggling with my BL touch and bed levelling on my Ender 3. After following your guide, I have finally successfully set up my printer. Thank you for your efforts.

@user-ir1cs3ge4l 4 года назад

Thanks 3DMN! This makes life easy. Most will say this has to be changed in firmware, intimidating for most. This process also applies to the X and Y offsets, only input your measurements from the nozzle to probe on X and Y.

@billbollinger3748 2 года назад

Just spent 4 hours trying to troubleshoot this issue and your video was the only one that had the info I needed that I found. Thank you!

@jamescullins2709 4 года назад

Awesome! I am glad you listed the steps. It helps this old man understand how it works. Thanks

@AmanoJack 3 года назад

Absolutely brilliant! The current (2020/12/22) official Creality firmware for Ender 5 does not allow the Z offset to be saved, so this was a lifesaver! Thank you!

@fredphilip822 Год назад

For days I was trying to get the proper z offset on my Ender 3 following several different instructions from the web. nothing worked. Finally, with your instructions, I was able to set it properly and the prints are fine now. Three thumbs up for you. The only caveat I was encountering was, my Pronterface (Linux) didn't work. It didn't get any feedback from the printer. I used than octoprint and it was working fine. Hallellujah.

@sc00zy 5 лет назад

This helped me a lot 3DMN always nice to see you're tutorials! Greetings from Belgium :)

@adscomics Год назад

Oh god, thanks for making this video. Been having leveling issues with an Ender 3 for years and am still kinda new to the concept of auto leveling, this video quickly helped me fix the problem and get nice first layers finally!

@DrewMarold 5 лет назад

Thank you so much for this. I did a board swap & added a BLTouch and couldn't for the life of me figure out how to set this properly. Now I'm back in business.

@daviddavies3637 4 года назад

This helped me with my Ender 3, although I had to finish it off through the control panel. Had been having major issues with it ever since I installed the BLTouch last week ago. Now it seems to be working fine.

@supergiantbubbles 4 года назад

Thanks for making that incredibly clear and easy to follow. Your channel is one of the best for 3d printing.

@moniqueisaac9391 2 года назад

I have watched countless videos over the past week and none of them help. This was an awesome explanation even though it was over 4 years ago. I never leave comments but I felt inclined to give you many a thanks!!!

@scottwilliams8158 3 года назад

After 3 days reading, watching and researching I was ready to remove the BLTouch from my E3pro when I stumbled upon this video, I'm still a noob. Followed to the letter I manage to get my E3pro (V4.2.7 and BLTouch v3.1 running the latest Marlin firmware) to actually print again albeit i had to adjust my z offset on the printer itself afterwards by 0.7 Absolutely awesome, thank you 👌🏻

@pomikk2000 4 года назад

Thank you for an amazing tutorial on how to do this, I was about to go mental :), now I have perfect prints all the time.

@andreasgustavsson7769 3 года назад

You.... are.... THE MAN! Best way to calibrate! Good video straight to the point!

@ssbbcop 3 года назад

I come back to this over and over again to get myself set up. Such a good tutorial!!! Thanks!

@meltonpieman959 3 года назад

Joe. I have just realized that I had been using your method of setting up the Z offset for at least a year before I found you again for ideaMaker (and subscribed). Have just accessed the method again to reset Z for my Micro Swiss hot end and direct drive - off to do a fine tuning calibration print and live Z offset tuning next. Thanks for everything you produce. I hope that you are keeping safe from the Covid 19 spike there. David

@jsprechs7847 2 года назад

I'm an engineer and work in the industry. I've been using this video for close to 4 years. If this ever goes away, I'll be SOL 😅 thank you so much.

@zainnykaz Год назад

most under rated and best ABL video on youtube. Thanks alot

@Inkhed1 5 лет назад

For real thank you so much this has been my problem all day today and you just helped me fix it. I don’t really have a big maker community here so thanks for making it bigger. Keep on keeping on.

@whispersintime 3 года назад

THANK YOU!!! Over here jumping up and down with Joy!!! My ender 5 plus actually works now!!

@slep_p 3 года назад

Your video is a lifesaver, took the pain out of bltouch on my cr10 v2! thank you!

@johnwortman7624 3 года назад

OMG Thank you SO much!!! I have been fighting with this Z Offset for too long!! SO many useless videos on this. My Applause, Sir! You are Amazing!!

@dineshvyas 4 года назад

Brilliant explanation! Universally understandable accent. Thank you so much.

@richardhince9764 6 лет назад

Very good tutorial! I would say though that the BLTouch is measuring a point that is offset from the nozzle. With most beds that won't be a major problem, but strictly speaking, you ought to move the nozzle to the BLTouch probing position before setting the offset. In any case, it's still a very good and clear tutorial and better than most I have seen, so thanks for that!

@6502Assembler 6 лет назад

The best tutorial I've found yet on this topic.

@Hybrid089 3 года назад

This worked perfectly.. just got my Ender 3v2 working with the BLTouch with this guide! I’m a programmer and was pulling my hair out trying to fix the code for the BLTouch firmware. Since I couldn’t find the bugs I resorted to direct connection and these commands fixed the zero. I’m going to continue to work on the z-offset tool so that it can all be done on the printer but this is a perfect fix till then.

@andyjones704 3 года назад

mate, after 2 days of fannying around with this i found your video, which no one else has dealt with. thank you so much. solved now!

@colbritton1676 4 года назад

Hi and thank you so much for this very informative video. I have been working on setting up my BLTOUCH for weeks. Having firstly trouble loading Marlin firmware then corrupting the bootloader, Finally overcoming these problems I was confronted with the calibrations, more problems and then I found your video with Pronterface, I had never heard of this programme and boy did it and yourself make it even easy for a old fart like me, Thank you again and you have found a new fan.

@Pendleton115 2 года назад

Just wanted you to know how much I appreciate you for making this video, life saver!

@Serene-Scream 3 года назад

I just wanted to take a moment to thank you. I'm still pretty new to 3D printing and recently purchased a second printer with a larger print surface. I got a BLTouch for it to help with bed leveling and your video is the first I've found that was actually useful as far as how to go about calibrating it.