Camera Settings For Surf Photography Using Water Housings Without Manual Controls 

Thanks so much Jose! appreciate the feedback

Oh thats so good to hear, love talking about photography - especially water photography and if these tips help you out that makes it so much better. Cheers for your message!

Cheers Seth, stoked you tuned into this video and got some value!

Thats great Sam, more detail on that in my extended course which will be re-releasing in a few weeks time. Cheers mate

Hey Fenna, thanks for your message. The pre set of focus only works for super wide lenses like fisheyes or lenses under 20mm. If definitely will NOT work for your 70-200mm lens. You will need to use your 5Dmk4 camera when using your longer lenses. Or get the back plate for the 7Dmk2

yew cheers!

Hi Thom, thanks for your question. So exciting that you are starting the journey with water photography!! so much fun ahead for you!! To answer your question about avoiding get worked over by the wave I have a 60 shorts video that talks about this. Link to video is: ru-vid.comNEmHPYhG2QA?feature=share Please reach out with any further questions

Yeah the pre-set of the focus only works with ultra wide lenses. What lens are you using on the a6000? I do have tips for positioning in my advanced online course which opens again in a few weeks time. If you like you can take my free mini course at : dream-life-through-photography.teachable.com/p/transform-your-water-photography

Thanks Yves, appreciate your kind words! The white squares are double sided tape that came with the port where you can apply black fabric to reduce reflection from the front of the dome to your image... but I don't really use it, as I normally don't have a problem with reflection

@@dreamlifephotography Hi Tom, thanks for your answer! Do you sometimes have the problem that moisture collects inside the lens port or dome port? I have read from other cases that this happens because of the temperature difference. Some people then put silicate gel bags in the case. I have the Elite body for my Nikon D500 and will be starting surf and wave photography in Europe next month. Kind regards and keep it up.

@@splash.photography.germany Yes this can happen.. The only time Ive had it is when I have been on boat trips on the equator where the housing is kept in the cool air conditioned cabin and loaded there and then brought out into the warm tropical air. The best way around this is to have the housing un loaded and open to the natural air temp (whether that is cold or hot) for at least 15 minutes before loading and then you should have no problems. But yes I have heard moisture bags can help. But the best results will happen when you get the housing used of the air temps before loading it up. Also another thing to watch is that the housing is super dry, sometimes small drops of water can sneak into housing when unloaded from the previous session and just one drop probably won't harm your camera but it can create condensation. Hope this helps? so exciting that you are starting your journey with water photography in Europe this summer, it is seriously the most fun and rewarding pursuit. I wish you all the best and please hit me up with any questions. Yew!!!

@@dreamlifephotography Hi Tom, thank you for your help. I'll follow your advice and I'm curious how the pictures will turn out. Of course you have to practice. Thank you for helping me. Unfortunately, Aquatech does not offer any advice on the subject of moisture. I will continue to accompany your channel and am looking forward to your further results. Best regards, Yves

@@splash.photography.germany thanks mate, I may do a live video on this topic on instagram soon. It comes up a little bit, so its worth the discussion. If you don't already follow my insta it is @stimages or link here: instagram.com/stimages/

Sorry for the late reply Christian, I only just came across this question today. I recommend Dome ports for lenses 20mm or wider (so your 8mm to 20mm) are best in a dome port. And then when using longer lens like 35mm, 50mm, 100mm or 70-200mm lenses are definitely better inside a flat port. Cheers

HI Victor thanks for your message.. so I was using the 7D camera in a 5D housing so the focus buttons don't line up so I preset manual focus (something that you can do effectively when shooting with a super wide lens) When using the base housings with the camera it was designed for then auto focusing is 100% possible and works fine... hope this clear it up for you? if not let me know

You're welcome!

Hey Nick, Thanks so much for your message and kind words. I generally shoot in Manual or TV mode for action, depending on the light. If I am shooting towards the same area (like at a reef break or point break) then I set in manual, but in an unpredictable beach breaks with randoms lefts and rights in the surf I will shoot Shutter preferred mode (TV mode) Freezing surf action normally set shutter speed 1/800th or higher

@@dreamlifephotography I like to have all the actions at my disposal, there at the moment, I use everything in the manual, I have the control buttons on the back of the box to suit me, the only thing I set up before is the lens focus, like the aperture ring that I leave at 5.6 or 8 and the other ring I leave close to infinity, so I know I’ll have everything in focus, I use this technique when I’m using the 7 artisans 7.5mm 2.8 fisheye, because it’s a completely manual lens.

@@giuliannomoroni7860 sounds like a solid system... nice work

THanks for your patience with the late reply on this one, just finding some older messages today. So I wasn't using the base housing in this video, but if I was I WOULD be able focus. But I was using a totally different housing for the camera type, so I could only use the pistol grip (cable release trigger) which means I had to preset the focus... so that is where it might have got confusing... cheers for the message