Camping Wood Stove with Off Grid Thermoelectric Generator Water Cooling Mod - M-Stove Project Part-8 

You need a mppt circuit between thermal modules and load. The best is to have a storage after mppt like li-ion or supercaps to supply peak power. Another consideration is to have a continuous cooling like radiator or a fan because you have to have a continuous heat flow to guarantee the delta temperature. For now I think is a good start. Compliments.

That was just awesome. It blowed my mind. 👏🏽 the thermo electric thing is just phenomenon. Bravo

Knew you could get it to work! A wood stove that can heat, cook and charge your phone, outstanding!

Simply Brilliant stove project !! 👍🏻🇺🇸

This is amazing great job. I live in a small apartment and want to make one of these for myself. You are brilliant and very inspiring.

Hello my friend, it's getting better and better, it's finally central heating! you can install manifolds and thus distribute hot water for radiators.

이건 제가 생각한것보다 더아이디어가 좋아보입니다. 가면 갈수록 다양한 모듈러 형태로 갖춰지고있네요.

Great set of videos I’m inspired thank you 🙏🏽🏴󠁧󠁢󠁥󠁮󠁧󠁿

진화는 계속 되는군요 멋지심니다 눈이 항상 호강하네요

👍is incredibly wonderful way to charge your cell phone for free. thanks again. Greetings Hassan

That's amazing, I have been following since the beginning - it's great! Well done.

God job, keep up the work we may need you sooner than later.

화목난로가 무한 발전하네요. 대단합니다.

This is amazing, this went from a nicely designed stove to a high tech stove. I love the design and engineering. Can't wait to see you attach the water pump to it.

Wow! I'm just so impressed w/you & that stove. There's no end to the possibilities what you can do w/one of your stoves. Before I went into the medical field. I went to school for electronics in high school, my Dad made me bc are whole family worked @ A TV factory. And to help him in his electronics repair shop fixing Tv's, VCRs, & stereo equipment. It was free labor for him. I didn't really want to work for my Dad @ his shop. I was young & it didn't excite me. I just wanted to work @ the factory & volunteer w/the fire & rescue, it played $7.00 a call if you was @ the scene but you didn't have to do anything just show up & you still got paid. It was exciting & you never new what to expect on each call. I didn't know about those fire/ice generators for a long time, one side you put hot to, & the other side up put cold to & it generates power to charge your electronics. There so cool how they work. I love your design w/the stove. Mine is a large coffee can that I made & it's fueled by sticks, the little square generator is glued to the side w/wires & the connectors for whatever you want to charge. It works ok, but your setup looks a thousands times better & I know it's more effective then mine is. I just want to thank you for sharing your awesome work w/us (me). Sorry for that long message but I thought I needed to give kind of my back story on my electronics background. I do have a question: I would like to know why the water? And is there another reason why you put the drain pipe on it besides to drain the water out. Would the hot water be safe to like wash your pots & pans or your hands in it? Is the hot water toxic? I go by if it has 3 uses then I carry it, bc it's worth it's weight. If it only does one thing, then I'm going to leave that home & find something that can do multiple uses. ***Exp. A screw driver is good, but a multi tool is better.*** I hope you Understand what I'm saying. Sometimes I don't understand what I'm trying to say... lol... I was just curious. Thank you again. Be safe & God bless us all durning this dang COVID-19 virus, Chris from Missouri

It's awesome work.I enjoyed all the videos.

와 ㅋㅋㅋ 화목난로에 수냉쿨러 제작하는 분은 처음보네요 ㅋㅋㅋㅋ

Consider adding a small external tank and using an unpowered thermosiphon system to circulate the water. cool water goes in the bottom and hot flows out the top. No power or pump is required to circulate the water. Wood stoves have been used in this fashion to heat and circulate domestic hot water for many years. I grew up with one.

와......와....진짜...황금손!! 화목난로 보다가 이게 뭔가 했는데.... 발전기...허허허

축하드립니다!...^^ 성공을 거두셨군요...나날이 발전하는 모습이 보기좋습니다...^^다시한번 축하드리고 건강하고 행복한 날 되세요...^^

그야말로 화력발전이네요, 진정한 금손이십니다. 뭐 하시는 분인지 궁금하네요 ㅋ

시판중인 온수 장판과 연결 하거나 온수장판을 직접 만드시는 그림이 그려집니다 ~ !

I wish we had smellovison for the cooking great work keep in up.

진짜 맥가이버가 손들고 가겠네요 ㅎㅎㅎ 대단하세요 ^^

Excelent vídeo THX👍

Good job.........

From France : it's awesome !!! You are a very good engineer in the stove and BBQ . Best congratulation for your many invention

와우 대단해요~^^

정말 대단하시네요 ㅎㅎㅎ 장인이신 듯

Россия 🇷🇺 Урал 😁 12:11 мои поздравления👏 с воплощением одной из популярных шуток которые есть в России. Речь про: атомный (или ядерный 🤔) реактор в жилище с подключением к этому разных электропотребителей (освещение, отопление, разное на кухне, и что есть прочего).

very good idea ad couple more into the tank ...more power quicker

Fantastico👍👍👍👍👍

👍Water cooling is the right decision! When shooting my video about a thermoelectric generator, I heated up to 230 degrees Celsius. All temperature and voltage parameters can be viewed on my channel. 🔥 You did great! What temperature did you reach?🔥

i agree a water inlet valve in a good idea an very necessary

에너지 순환구조가 퍼져간다!

ㄷㄷㄷ. 온수매트가 가능해지겠군요!!!

Iron Surgeon 💪🙏🙋👏👍💯 Great ideals

Awesome

Good idea

순환호스를 연결 하고, 발전된 전기로 펌프를 돌린다면 진정한 무한온돌도 가능하겠네요!!

존경합니다~~~

Thank you 🙏

What a great idea! What if you integrate a ram pump for continuous cooling?... But that could only work if you are camping near a stream.

잘보고 갑니다.

급수관 하나 있어야겠다는 생각이 들었지만 바로 알아채시는 군요. 이걸로 겨울캠핑(집마당) 하시는 모습이 보고 싶습니다.

Tudo e possivel! Na natureza tudo se aproveita, tudo se transforma, a água aquecida pode servir para tomar banho quente no acampamento!

Add some capacitors and you will be light years ahead of where you are now. You have done a very wonderful job at developing this technology using only two TEG's.

ストーブでペルチェ素子を使った小型の発電装置は以前から幾つか販売されているので知って居ましたが自作も良いですﾈ。 ボイラーも良いです。そのストーブをいつかは作ってみたいです。 楽しい動画を有難う。

냉각수 밸브를 상하로 배치하고 온수매트배관을 연결하면 취침시 따뜻하게 잠을 잘수있고 리턴되어 돌아온 물은 식어서 냉각에 활용될것 같습니다

Спасибо большое! 👍💪👌🇷🇺🤠👏👏👏👏👏👏👏👏👏👏👏👏👏👏

Süper

Very cool. I love your projects. Note: there is no silicone in Wurth Fire Cement 1000.

Soon enough, that build is going to have legs and shoot lasers.

Hi, I see that you can make it better, while avoiding overheating.That is my opinion only. I ordered GStove, so I deep in expanding it's usage like chimney soup cooking (while main plate use for roasting)and thermoelectricity- peltier. 1- peltiers are connected continuously, not parallely. 2-air cooling is the must for handheld devices, don't need that big PC cooler,that 1 piece aluminum is enough.Fan is better, but for auxiliary battery.Avoid attach it over the main plate, because it can not be cooled down by cool air, better is at stove's side or chimney outside. 3-For smartphone charging , use module boost dc-dc 0,9-5v USB is the most.

아이디어가 좋으시네요. 조금 수고럽긴 할텐데.. 좋은 방법이네요. 혹여 물이 끓으면 위험해 보이긴 하네요. 냉각수 순환까지 된다면 온수매트를 통해 열을 빼고 다시 통으로 돌아오면 완벽하겠네요. 근데 100도면 끓는 물 보단 갈덴 같은 물질이 좀 더 안전하겠네요. 넘 비싸서.. ㅎㅎ회수도 문제고.. 대단하세요.

Hello! What a great advance, the temp exchange with water is very better than air. With an water inlet you can recycle the cooling fluid and make the generator run continuously. My sugestion: Try to develop an container for drained water that can dissipate temperature, to return the system again...

열전소자보다는 수증기 터빈으로 발전 하는게 효율이 좋을 것 같네요.

Can't wait till this is something you start selling online

Watching this progression is great. You seem to find new ways of making me want on of your stoves. The first model was cool but now we are at the super awesome amazing model. Really is a great idea throw wood on charge up the laptop in the middle of nowhere. Can’t wait for your next idea. I don’t know about everyone but I enjoy when people leave in problems like holes not lining up. I’ve did that one a bunch. Never thought about making the plate into giant washers like you did. But little things like that. One last thing the coolant water is that still ok after use or does it get contaminated (different metals or sealant toxins) just curious. Thanks for the wonderful videos an stay safe

와~~~~~!!! 정말 대단대단 입니다 과학자시군요!!!! 따라하고십은데 역부족일듯....ㅠㅠ

Nice

When your nearby water source like stream you can use continues cooling water by using ram pupm. Then have a release back to stream .

좀더 크게만들면 화력발전소온수매트보일러화목난로가 되는거네요.

Camping together Hi Great job!!!! If you want to have more power, refrigerator and 60 psi air to run a drill on air pressure you can an do it. 1. You need a battery storage bank. Bigger arrays cheap. Get a piece of copper pipe 3 inches in diameter by 3 inches long. Hook up copper wire to it both sides. Seebeck effect. Hook the battery up in the right spot. Then connect the batteries to an aluminum car radiator a few feet away from the stove. And you got way more power. With more power you can do MORE things like do refrigeration instead of electricity on the thermal couple. Or run a water pump. With a water pump you can get 60 PSI compressor air to run a drill, grinder off compressor air. I will show you if you want. You got way more heat than your are using. BTU to power

The only good thing about thermoelectric elements is that they are small, but they are not very efficient, as your oven is, develope your stove first so it burns the woodgas, just look for "gasifier stove" if you don't know it already, easy to make with this container system as you use it, definitely worth a try. Gasifier systems produce strong drafts by the fire that sucks air in, your oven does it already and could be used aswell for a turbine system, but gasifiers do that more constant, you don't set the size of the fire through setting the drafts, aslong the gasifier is doing its job, the draft is there all the time. Also instead of placing the water tank beneath the oven, place it on top and make a steam machine and water cooker just by the way. Your oven is nice, don't get me wrong, but since it is a developing project, I think some criticism is helpful for you. Keep on bro 👍

A very good insulation between cold water and heater chamber and silver or copper extention blocks from heater to cold water chamber for peltier would bring best results.

우어... 전선 나중에 다 녹을거 같아요 ㅠㅠ

최첨단!

I like this project, i have an idea that can helps you to develope this project. You notified that the water heated up over time due to radiant heat from the stove, so you can try to make an radiator with a coil and make it outside for an cool air and a mini 5v water pump to make circulate from the container to coil in a loop and that can make the water cool all the time. Ps : the mini 5v water pump can powered directly from the converter you made and i consumpt just 0.6 amps × 5 volts = 3 watt 🥰 Good luck from Morocco

라지에더와 워터펌프를 이용한 냉각 방식은 어떨까요? 아니면 연소통에 바람같은 풍력발전 방식도 재미 있을것 같습니다.ㅎㅎ...

maybe u could let the inlet air go trough that cold chamber first and then enter your stove, then u dont need water. If this works... more peltiers? :O great videos man

i'm trying to figure a teg out. you put it under the stove. what's interesting is a module manufacturer makes a stovetop unit that sits right on the top of hot stove. works immediately. Going to all that work....use 4 teg's? 2 series, 2 parrallel.

Awesome 👍👍👍Thanks for sharing. Now put aluminum heatsinks on the outside of the water tank and it will keep the water cooler longer

나중에 설명에서 말하신거처럼 온수장판 연결해서 사용해보셔도 잼있을거같아요

Open the water valve and you can have hot tea.

Идея хорошая , но необходимо на системе охлаждения понизить температуру. Тогда будет более стабильная система.

버너로된 기성품보다 운치있고 좋네요

Love the idea but the design seems like it could do with some work as it doesn't seem to heat the water very efficiently, how long to boil that 4 litre's?

Or use it as a small hit water tank. But to cool it you would need to recirculate the water through an external cooling block.

Comming soon.... M-Stove Project Part43 (nuclear powered stove) If someone left this guy on a remoteempty island with absolutley nothing on it with only a stone and a stick he would probably be able to send us an e-mail within a week, tops! Respect!

you don't use disolinated water? what if i had a larger battery and inverter? that paste you put on between the cell and the generator is that called thermite paste? would it be possible to use the heated water flow to cool water flow to heat a small horse tr-off that was converted into a makeshift hot-tub? plus all of yr heat that can produce team and increase the thermal output is mostly on-top of the unit, wouldn't you get more output if yr thermoelectric generator was closer to the hottest part of the unit? or is that too much output to input fore this de-zine?...

물에다 자동차용 냉각수를 넣으면 물 교체 안해도 되지 않을까요?

Add ball valve pointed up to top of water container to ease filling

TIP: You could use the fan along with a heat source taken from the burner to create central heating for your tent :)

I like to shrink heat-shrink tube with a lighter via swipe the fire under the tube quickly. It can then be shrinked nicely. For your consideration :-)

For when the 220v .... I want you in my team !!!! Excelente

외국 덕후들 난리 낫구먼 ㅋㅋㅋ

I don't think using that silicone is a good idea, as you might well now, the TEC/TEG needs a high-temperature differential in order to generate more V and consequently more power. By adding the silicone (though low thermal conductivity) you are adding an extra "bridge" (parallel resistance always decreases overall resistance) for the heat to go from hot side to cold side (even if silicone is low thermal conductivity, air's is even lower). As general advice, work the most on ensuring the best thermal contact between the heat source and hot side of the TEG (thermal paste & pressure) do the same for the cold side and make sure to not thermally shortcut the TEGs

i think make some thermal insulation between the lid and container would a better chioce

투게더님 부탁이 있씁니다 지금까지 난로를 많이 만드셨는데 촌에서 쓸만한 냄새 안나고 연기 잘 안나는 소각기를 만들어 보시는게 어떤가요

Could it be a hot or warm water heater too! :)

If that is used to power a fan to blow into the stove, it would reach higher temps, stoking the fire which would make more electricity, wouldn’t having the thermo above the stove capture more heat?

아 물에 담그셨구나 ㅋㅋ

Congratulations, you have achieved success with the water bath to provide cooling. If you use their stove during winter with snow packed around the base, your efficiency should increase. Good observation for inlet port as well. You solved two problems with this one solution. In addition to producing charging power, you have added a water heater for dining. Trusting that you and your family are safe from the dreaded Covid-19 virus. Wishing you continuing Peace, health and happiness. Cheers.

냉각수 주입구도 조만간 만드실거같은 느낌

호스 연결해서 물 순환시키면 온수매트도 가능하게되는 건가요?

Отличная работа ! Но поспешу опечалить при нагреве жидкости до определенной температкры эффект Зебека перестает работать ! Чтобы продлить зарядки нужно постоянное охлаждение !

I wonder how much more energy could be produced if you used ice water? Have you looked into a gamma type Stirling engine? Hook those up to a dynamo and you'll get electricity. :)

I think someone can make a small version of nuclear reactor cooling system with this,all it need is double or triple of these in one with a capacitor or inverter

물에 담궈진 구리와 알루미늄은 얼마나 버틸까요 다양한 시도 응원합니다.