@@Slingmods True but there are those of us who do our own lighting mods which would be a nice addition since most do not have the connectors to do plug n play.
Damn. I wish this was available a month ago before I tore my front end apart and did all my wire work. I’m not going to break everything down again at this point.
Yeah, I hear that! Folks have been asking us for an alternate plug n' play power plug for lighting, so that they can free up the 12v port under the left upper fairing for other stuff. We have a bunch of new lighting mods coming for the Ryker, so this power harness was essential to launch prior to the launch of those mods so that there's a place to plug into for power.
You'll need the 1:2 front fender power harness here: www.slingmods.com/canam-ryker-front-fender-power-harness with the optional 1:4 Power Expansion Harness that's offered at time of purchase. Thank you!
Where do I connect the harness from the Sequential LED Turn signals kit and the RED “add on” Reflectors LED turn signals to the new Fender Power Harness?
Hello Chulo, you need this kit here: www.slingmods.com/canam-ryker-front-fender-power-harness , but you'll also need the 1:4 splitter if you plan on running multiple dual color lighting mods. The 1:4 plugs into the front fender power harness I linked above allowing you to run up to 4 dual color lighting mods.
Thx for the feedback. We're actually not the MFG of any of the products we sell. We do the videos for you guys because written instructions are often not provided by the MFG's and we want to provide you with assistance on how to install the product. Thanks for watching! :)
Very disappointed. No directions were provided on how to daisy chain when you already have the Amber and red sequential lights. Also, the connections do not match the sequential lights.
Hello Dperry, you can tap off the plug going to the front tip light if you're adding the 1:2 power harness after you've already added the red/amber reflectors.