Can changing your oil to Liquimoly MOLYGEN add horsepower? Surprising results 

Liquimoly tells you NOT to add any MoS2 to their molygen.

Maybe the 3hp gain can be associated with the guy standing infront of the car spraying lol

I just started running liquimoly 5w30 molygen new generation. Got rid valve noise on my K24. it also improved more smoothness at higher RPMs. it was a instant difference. LiquiMoly makes great stuff.

Remember, just because you reduce friction doesn’t mean you reduce wear and vice versa.

Liqui Moly does not recommend using any additives with their 5W-40 Molygen oil as they claim it upsets Molygen's balance of additives. However with their 5W-40 Leichtlauf they recommend adding Ceratec, which is basically MoS2 with ceramic particles added.

I think the power difference is down to the guys spraying water on the intercooler after the oil change vs not spraying it with the Castrol in it. Lol. Not sure what the point of the video was other than to advertise Liqui Moly. Also the other oil was used for 2k miles. This is by no means a scientific experiment. Just fun and advertising for Liqui Moly. 👍🏻

You would have been better served running the Dyno on just the Molygen first before adding the extra additive. Their claim is the Molygen already has the correct amount of moly in it.

i recently changed to the Molygen 5w-40 and the engine actually sounds quieter.

Yo usaba mobil 5w30 extended performance en un chevrolet aveo 2018.5 motor 1.5 probé liqui moly 5w30 molygen y si se siente mucho la diferencia lo recomiendo muchísimo saludos desde México

Golf mk 5 2005 1.9 TDI., 290 000 kms, i changed the oil one month ago,. That thing went from a Tdi to a GTI. Idle smooth, smooth engine noise, improved acceleration and turbo response, heat is lower too. I live in mountain roads and i need that torque , acceleration and driving confort. I just changed, bearings, disk and pads and few others things to make the chassis up to that 1.9 tdi running perfect. Perfect ! Molygen, is not cheap, but that is a correct way to enjoy the car for many more miles.

Even if the molygen acheives the 15% reduction in friction, the amount of friction we're talking about reducing is very little to begin with. In other words, there's not that much friction to be eliminated to start with in modern engines. So a 15% reduction on a basically frictionless engine will yield very little.

Liquimoly recommends not adding any other additives to their molygen. Longer of their engineers say that mixing in additives add different/conventional oils and hinder the molygens molecular friction reducers.

Привет из Италии, Флоренция. Я на своем Suzuki Jimny 4x4 бензин 1.3 с двигателем m13a 2001 года выпуска. В 2021 году я заменил моторное масло на Liqui Moly leichtlauf performance 10w40, хороший продукт, а в 2022 году я заменил масло на 12 000 км, взял присадку ceratec и в качестве моторного масла ставлю liqui moly leichtlauf mos2 10w40 тоже хорошая смазка а потом использую присадки liqui moly для очистки системы впрыска бензина и клапанов!

3-4 hp is well within the margin of error here but cool trying! Really need 3 runs of each and average them - I didn't see that buy maybe you did?

What the difference between SAE 5w40 and the normal molygen

Overtime Mos2 gets slicker in your engine. So it may give you up to 10 horsepower and better fuel efficiency. It does work but give it about 1,000 miles first, engine really smooths out.

When the like 6th frame of this vid shows a 3hp decrease😅 btw. I seen some comments saying it made an additional 3hp? That's margin of error. Ty commentary for saving me 30 minutes

How does this stand up to Amsoil signature series?

I always used mobile 1 0w40 for my 6.4 never lesson lifters noise for long time, after using liquimoly 5w40 for couple mileage i lesson alot noise from my engine 🙃🙃

So no spray with the old oil???...changes the the parameters then...no?

can i put molygen in my 2006 s4?

Science.

This oil doesn’t require additional addictive and it’s not recommended to use it

Yoo Az gang ! Love the content 🔥

Spraying water for the LM run and not the castrol run is your 3 hp I'm afraid...hahhahaa...just noticed that. Always in testing...apples to apples/all variables the same. Also, could have run the MoS2 with the Castrol so Castrol on it's own run. Castrol + MoS2 run. Molygen run. Molygen + MoS2 run. (3 of each, average them). No water spray on any of them.

I bet it would or been the same with any new 5w40 oil.

Do you think I would be safe running this oil in my 2017 subaru STI? Take 5w-30 so I don’t see why not. Any info on this helps. Thanks!

I used Molygen 5W40 for my last oil change and even used Liquimoly's Moly additive, but I think I'll be going back Castrol Edge 5W40, especially after watching Project Farm's oil review

2015 audi s3 106,000K Switched to Molygen @ 100K. Why didn't I do this earlier ugh.. This green molygen is like water 💧 to this audi. It loves it. And the uv is badass. 1? Can you add liqui fuel injector with Molygen green oil?

When did this UV feature become available? I wish my mechanic knew about this in 2016. Took forever to find the oil leaks.

1st run : no water spray 2nd run : long hair guy spraying water into the intercooler 4whp&4Nm after new oil&mos2&water spraying is a hard sell to me, LM could do better, seriously

What's the margin of error on a Dyno? About 3hp?

Hi, 1st Molly company doesn't suggest to add anything, 2nd I done the dyno test too. Did not gave any extra power all bollox

So I put the LM Next Gen 5w-30 (green stuff) in my WRX and my mpg has gone down a few. Engine tone has also changed (lower like engine is working harder). Car has 38k miles. All previous 6 oil changes used Subaru 5w-30 (dealer services)...so what's going on? Is LMNGen thicker than advertised or is the Subaru dealer using something thinner than spec'd???

Dies this oil contain any zinc, or is it just pure molybdenum ?

Why wouldn't you do a pull before you put the additive and then after? The molygen isn't ment to be topped up with anymore additives.

Add ceratec to amsoil signature series,etc - better for less $

Hi, so I filled up my Kia Seltos engine with this Liqui Moli Molygin. And I already have run almost 5100 kilometer. And the oil all run out. Its color turned into brownish. No viscosity. And other people told me to run even over a 10,000 kilometer and it would want more 👎. Thet NOT true unfortunately. This is so bad for my engine. I'm gonna change it immediately

I use liqui moly in my 1.8T volkswagen passat. I used ones this green one and i drove 300 miles i hade engine light on then i stoped to use green one. I would say it is perfect for new cars not for the old cars

So you can add mos2 to moly gen 2 oil., I can't find a straight answer, on weather it will affect the moly gen 2 or if they work together or against each other, an if so do you use the same or alittle less considering moly gen supposedly was mos 2 in it at a low percent,,someone please answer this I'm going crazy to find out ,maybe add it to every other moly gen oil change or what ,,thank you guys,,,I'm stage 2 ie tune ,ie dsg tune ,many many bolt ons obd eleven scan gool ,3 onch cold air intake with heat sheild. Arm motorsports charge piping kit ,cts down pipe, cts catch can gfb diverter ,apr coils,034 street mounts 2 step cold plugs, upper an lower dogbone,cts turbo muffler delete kit,which I hope fits the cts+x k04 I'm getting , forge turbo blanket, intake an manifold along with charge pipe heat wrapped, I just started using moly gen 2 oil ,after many miles of mobil 1 euro blend ,black bottle ,and at first it seemed louder after moly gen change but I just did the mounts that were shot so I assumed it was loader cuzz the engine sat higher an the noise was echoing from the engine up next to the body,considering or engines are loud to begin with but after about 500 miles it kinda quited down a bit so can I use mos 2 safely with moly gen oil or will it sludge or cause other problems, car has many mile but well maintained compression is about 170 on each cylinder which is excellent considering the mileage an timing has been done as well,,but some say yeah it'll be fine or no it's not recommended,,,I'm looking for experience on this that tells me ohh he'll no or he'll yeah an why ,,thank you very much guys happy tuning

Good evening, if you would allow the right oil for the car, Chevrolet Triple Blazer, model 2004, engine 4200, note that the oil cap says 5w30, which type of product was used by Comoli?

There is nothing special about Molly Gen oil. This 4 hp increase is due to Mos2 anti friction treatment. If you put the same thing in castrol engine oil, it will produce even more power.

Brilliant 🥂🥂 Go Quattro. 🤟🤙😃

your not supposed to add anymore additives to the oil, it disrupts the already perfect addative balance!!

Just a Liquimoly advert really. so it had to show better. i bet the first run with the new oil showed no real difference. hence the run with the guy spraying water in.

ANY new fully synthetic oil would give more hp on the dyno compared to the old oil the engine had. This video is nonsense... and probably paid by the company. PS: Ceratec does a much better job as anti-friction additive...

Water .!)

Speed is slower

RIGGED 🤣🤣😂😂

old oil vs new oil would set a difference like that nothing special.

That is within the margin of error proves nothing.

How can oil add Power lol

Ams oil is better