No video :(

Can I fix this Amiga 4000? Part 3

Подписаться 33 тыс.

Просмотров 2,3 тыс.

50% 1

Join this channel to get access to perks:
/ @gadgetuk164
or you can support the channel via / gadgetuk164
or ko-fi.com/gadg...
Merch is also available - gadgetuk164.my...
The third of a four part series covering the repair of my Amiga 4000 motherboard which suffered lots of corrosion from a leaky battery and capacitors.
Part 1 - • Can I fix this Amiga 4...
Part 2 - • Can I fix this Amiga 4...
#commodore #amiga #repair #electronics

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@GadgetUK164 6 месяцев назад

Part 1 - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5DpV20FSI7E.html Part 2 - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aBR1nq336dA.html Amiga PCB Explorer - www.amigapcb.org/ A couple of corrections: 1) These shipped with a 2MB Chip RAM SIMM - I said the 8MB original... 2) The memory mod to use 32MB SIMMs, you end up with 112MB I think, not the full 128MB

@TheRus13 3 месяца назад

When I worked at Panasonic, some PBX systems used an ionistor instead of clock batteries.When the station is connected to the network, the ionistor is constantly charged.When the power was lost, the settings were maintained from a charged ionistor.I don't remember exactly how long the charge lasted, but it worked quite well as a backup power supply.

@SimonZerafa 7 месяцев назад

That Joystick Port doesn't give you UP? Sounds like the Rick Astley Paradox 😏

@GadgetUK164 7 месяцев назад

🤣

@erickvond6825 3 месяца назад

Something you can use as a solder mask is SLA 3D printer resin. It cures a lot harder and isn't susceptible to being dissolved by IPA.

@ChrisEdwardsRestoration 3 месяца назад

im not a fan of turn pin sockets anymore... theyre great if your pins are pefect. and you never take them out. excellent work as always

@GadgetUK164 3 месяца назад

Yes, I tend to use them when legs are super short, or when I have turned pins to plug into the socket etc. But as you say, for a 1st use - they work OK! Regular removal and they just become sloppy as the pins wear a little on the chip (they get rounded off more and more each insertion).

@wheatenclient3623 3 месяца назад

nice! Been enjoying you vids for quite sometime. Your style of meticulously remove all the DIPs to clean them really impressed me. I'm sorta person if it works don't fix it. Do ples keep it up the good vibes.

@MorganJustGames 3 месяца назад

I see the Title of the Video, Can I fix it? I automatically think, this is Gadget, of course he can, he can fix anything.

@GadgetUK164 3 месяца назад

Haha =D Thanks Jamie! Your mouse is coming up very soon!

@JohnGotts 3 месяца назад

Patience of a saint.

@williamsquires3070 3 месяца назад

I think I would have just run some 30 ga. wire-wrap wire from the via to the resistor; a lot less fiddly than those really hair-thin PCB traces snaking under the connector. 😊