Can the 3DRAP mods fix the ISSUES with the CSL Pedals?

Подписаться 72 тыс.

Просмотров 17 тыс.

50% 1

Dont like the Fanatec CSL foam or the pedals are too soft? This might be for you
www.3drap.it/simracing-mods-d...
➡️️Channel Membership: bit.ly/3wLWikG
➡️️Donations: bit.ly/3wZ5UZc
➡️️Discord: / discord
➡️️Instagram: / randomcallsign
➡️️Twitter: / randomcallsign
➡️️Business email: randomcallsign.mail@gmail.com
Support the channel by using the affiliate links ( I get a percentage of the sale):
➡️️Fanatec:
EU/UK: fanatec.com/eu-en/?...
US/CAN: fanatec.com/us-en/?...
AUS: fanatec.com/au-en/?...
JP: fanatec.com/ja-en/?...
➡️️Amazon UK amzn.to/39ATPQj
➡️️GTOMEGA: bit.ly/36FUnDq
➡️️Simétik: bit.ly/3NAbZkT
➡️️Race Anywhere: www.raceanywhere.co.uk/random... (use code RC5 for 5% discount)
Rig Specs
➡️️Simetik K2R + GTOmega XL RS seat (Sent by Simétik and GTOmega)
➡️️Fanatec DD1 + DDPRO DD 8Nm (Sent by Fanatec)
➡️️Fanatec V3 pedals
➡️️Fanatec Clubsport Shifter
➡️️Fanatec Clubsport handbrake
PC Specs:
➡️️AMD RYZEN 7 3700x
➡️️32GB RAM
➡️️EVGA 3070 XC3 Black
➡️️NZXT H510i NZXT H510i amzn.to/3whusfg
➡️️BenQ 3415R amzn.to/3LkbRDy
Audio and Video
➡️️AKG K702 amzn.to/3wuJ8Xw
➡️️Sony A6400 amzn.to/3MlNMxK~
➡️️Elgato Cam Link 4K amzn.to/3PhQTIO
➡️️Elgato GOXLR amzn.to/3NlgfE6
➡️️Rode Procaster amzn.to/3lhH3ZE

Игры

Опубликовано:

7 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@SrJabardo 2 года назад

Interesting mods! Also loving this new format of vids ;) Keep it going!

@mrj3217 Год назад

Those sim hound racing slides are very good. I bought a pair of them and it took a while to get to me. But customer suport waved the shipping cost. They were very responsive.

@Ishaarkyyy Год назад

I have the brake en throttle mod, it’s amazing ! For the brake it s a game changer !

@8ending8ranches 3 месяца назад

I use both the throttle/break cam kit with a spring loaded hydronic piston and I love it for the clutch.

@adriancuevas1587 2 года назад

I use RC car dampners with 3d printed parts to increase resistance to my csl pedal set and you can even ad some pre load if you want. Total cost is about 20 usd assuming you have a 3d printer

@AjaxAS Год назад

Doing the same on mine, and realistically as these are simple and small parts, it would not cost a lot to have someone print them for you.

@aarongreen121 2 года назад

It's a shame but literally everything I've bought from 3drap has broken, sometimes a few months down the line, sometimes a matter of weeks. I got the pikes shifter and the magnets kept coming apart, I bought a H pattern upgrade for a Logitech shifter and all the gates eventually snapped off, and the mechanism to give the shifter a more realistic feel broke as well. It was a real shame, their stuff just isn't built to last in my eyes.

@alphastratus6623 Год назад

Thanks talking about this. This is my biggest concern of this. Karl Gosling has shown some modifications made out of sheet metall and metall springs. I will look for this more durable material.

@Vortechtral 3 месяца назад

I found two nuts in my bucket that are just large enough to squeeze into the stock foam adding a little more resistance. They wont rattle loose or pop out, and two side by side are a hair smaller then the diameter of the foam so it doesn't impede on motion. I can't say for sure if it feels any different then the foam with nothing in the hole, but I don't know. I saw a video of someone using a wooden dowel so I tried the free mod and well it was free so it feels good none the less. I'll save my pennies till I can get a nice set of pedals.

@noobdaddyraces 2 года назад

thanks.

@brunostiglitz7535 Год назад

these 3DRap rubbbers are no different comapred to the origianl ones..its still quite hard to push on the load cell pedal..i had to use one 3DRap rubber foam to get the soft feel

@L3nny666 11 месяцев назад

from the reviesw i watched, i maybe get the zero noise mod...everything else doesn't seem to do much or give a good feel.

@izzieb 2 года назад

I know this is a radical idea, but hear me out. What if... hear me out... Fanatec actually fixed the issues with their products?

@TheworldwithTrey 2 года назад

Listen…. We hear you…. But no - Fanatec 😂

@radityaindera3442 2 года назад

Tbh these mods companies will always sell their various solution. As all these things about pedal feeling are highly subjective. Someone will always like something anyway.

@alexandrerossi3553 Год назад

Stop buying their products…

@alphastratus6623 Год назад

Hm, no. The reason: I like to modify and do stuff on my own. Sometimes I make my own mod, sometimes I buy other peoples mods.

@nombom-km7wu Год назад

Its not issues. Its cheap pedals, you get what you pay for. Pay more and get the clubsport v3 pedals if it bothers you.

@KZ_drift 2 года назад

The one thing i would die to have is a realistic pedel set that feels EXACTLY like a real clutch brake and gas pedel cause all the pedels i have tried are just bad cause there is barely ANY travel compared to a real car

@KZ_drift 4 месяца назад

@@SIMRIG412 yeah I do know that damn bro why you got to be a bitch about it? All I wanted was a long throw on my clutch like the fanatec inverted pedels

@ascorbic123 2 года назад

Kind of glad I got the previous generation set of pedals, these newer ones look like like a bit of downgrade material wise.

@Michelsen77 2 года назад

Same thoughts here

@bryan34wable 2 года назад

I found a 10$ blue coil spring off Amazon that made the pedal 200% better. Now I get close to 2” of travel and a decent amount of stiffness still.

@ravelord4028 2 года назад

You mean for the throttle? Could You please give me the name si I can look for it?

@bryan34wable 2 года назад

@@ravelord4028 no for the brake. It’s a blue coil spring made for the bed of a 3D printer. Just under 1.5” long. I removed some of the black spacers and plastic washers.