Can You Drill a Hole With a Tin Can?

Подписаться 184 тыс.

Просмотров 202 тыс.

50% 1

Sometimes I need a hole saw drill bit, but I don't want to spend too much money on it. I don't mind to spend money on good tools, but hole saw is not something I use often. It's kind of like spending 10 - 15 euros just to drill a hole...at least it my case.
In this video I am trying to find out if a tin can could be used to drill a hole.
Result was very good. You can drill plastic, acrylic, drywall and other easy to drill materials.
It did not do a good job in drilling wood.
----------------------------------------------------------------------
This song is licensed under Creative Commons (CC BY), meaning it's free for you to use (even commercially), as long as you attribute the song in your credits/description like this:
Music: Deeper Love by Ben Clock - www.BenClock.com
----------------------------------------------------------------------
Smoke on The Water Karaoke:
• Smoke On The Water - ...
----------------------------------------------------------------------
Warning: Use this video content at your own risk.
----------------------------------------------------------------------

Хобби

Опубликовано:

8 янв 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@williambutler3204 6 лет назад

your can needs a hole on each side of the can, this will allow for air to cool the can so the heat from cutting does not get so hot, plus it helps for removing any piece you are cutting that may get stuck in the can, but pretty cool demonstration.

@vermalife85 6 лет назад

You gave me an idea. . God bless you

@abobobo943 6 лет назад

very good idea. thanks

@mackshinoda9969 2 года назад

U make me remember young Fred Durst 😂🙏

@audelioespinoza1934 3 года назад

Very genius idea thx.

@JAYTEEAU 6 лет назад

Great work. Loved it. Cheers, JAYTEE

@ShakeTheFuture 6 лет назад

Thank You!

@_Zoltan_ 6 лет назад

Wow! Such a cool and creative idea! Also very cheap!

@ShakeTheFuture 6 лет назад

Thank You! I am glad you like it.

@robertalbert5428 3 года назад

Very cool!

@setho1231 6 лет назад

When do we get the full versions of that cover

@wasanthawimaladharm 4 года назад

You are the man 🤘💪👍

@tinmgwin393 3 года назад

Thank you so much

@adilkhanazmi7692 6 лет назад

Wow what a idea

@ambirrai9169 6 лет назад

so good

@bigj43454 3 года назад

STF University get it? Just playin. Great video man i never would have thought of that. I had to get two hole saws last year. Had I known this...

@boredmoroccan2401 5 лет назад

That last one made laugh 😂

@javilarg 6 лет назад

Funny, interesting, dangerous 🤩

@joaomendespereirafilho5117 6 лет назад

Cada ideia melhor do que outras

@HassanRagheb 6 лет назад

THANKS

@darmawandesign7820 5 лет назад

Creative

@yaarkhan5294 6 лет назад

hi friend you are really having very very creative and helpful ideas... uptill now I have seen many of your tutorials based on PVC pipes...all were very helpful can you PLEASE make some more videos on PVC pipes but this time use big diameter PVC pipes and teach us some more ideas by using big pipes as well ... hope you will again show something very useful and best thanks a lot

@ShakeTheFuture 6 лет назад

Last time I spent around 10 - 15 euros on a drill bit that I only used for 1 project...that project did not make it to RU-vid. I could have bought hole saw drill bits on the internet, but I needed it the same day, so the only option was to buy it locally. I don’t mind to spend that kind of money on drill bits, but to honest, hole saw is not something I use very often. In this video, I wanted to see if something simple as tin can could replace an expensive hole saw.

@srrufeleles9199 6 лет назад

Shake the Future eres español?

@bijaymajhi6570 6 лет назад

Shake the Future oLy

@mohammadmustafa722 4 года назад

Nice innovation

@londontipton7780 3 года назад

Thank you. I am trying to make holes in a can/plastic bowl to make noodles, but don’t know how. Thanks

@kojer315 6 лет назад

woooooow that's perfect

@ShakeTheFuture 6 лет назад

Thank You!

@FROSTINATOR 3 года назад

So this actually worked pretty for well for plexiglass??

@gertkriel5764 6 лет назад

Great video as always man Thanks for the hack Ps got any studies hacks I'm currently studying to get into university got any tips to make studying a little bit easier?

@ShakeTheFuture 6 лет назад

Thank You Gert! Honestly I don't have any tips on studying. It's something I always struggled to do. Now when I am not forced to study, I enjoy it more...maybe because I can learn about the things I like.

@philippe-lebel Год назад

You should try to "glue" a saw around the edge of the can.

@FusionDeveloper 2 года назад

Great! I wish I had found this video before buying Spade bits, which are horrible for plastic.

@cdoublejj Год назад

your speech is quiet but ,your music is blew the speakers out of the tv in to outter space

@pheenix42 6 лет назад

Try using a piece of metal conduit sometime with teeth filed into it. Works pretty well if you make the teeth correctly.

@user-dv6si9cf6k 6 лет назад

唉唷唉唷

@user-dn9vd9xg9p 8 месяцев назад

They make can openers now that cuts leaving no burs on the can or lid.

@widebandrecords902 5 лет назад

Whole lotta smoke. Yea.. nice

@anakindonesia888 5 лет назад

👍👍😁

@not_herobrine3752 5 лет назад

inexpensive burnout machine

@SeriousDIMA 6 лет назад

Возьму на заметку

@shereef131 6 лет назад

ممتاز ممتاز

@motelman6036 6 лет назад

All fun and games until you eat popcorn out of that plastic bowl!!

@anon3837 6 лет назад

2:59 Why???

@ShakeTheFuture 6 лет назад

It's my strange humor :)

@LashingMrX01 6 лет назад

Jumped out of my skin XD

@xcobyxzei 6 лет назад

I lolled at this comment

@ShakeTheFuture 6 лет назад

Mee too :)

@iawindowss4061 6 лет назад

Smoke on the water by Deep Purple in 1972 it was the first song I learned to play on the guitar

@nuwbers 6 лет назад

Yes

@ShakeTheFuture 6 лет назад

Yes Indeed!

@whitefeather5629 6 лет назад

Only if I were 50 miles from town. It takes longer to do what you did than it would to heat the can and melt through thin plastic and trim it.

@ShakeTheFuture 6 лет назад

I did not mention it in the video, but it took me around 15 minutes to make it + you can use it a few times before throwing it away. Heating the can is also a good idea. Cheers!

@FusionDeveloper 2 года назад

I don't like burning plastic.

@tanmaykhanna5807 6 лет назад

Best way to save money

@ShakeTheFuture 6 лет назад

Thanks!

@lakhdartemagoult2370 5 лет назад

i want to drill a big hole in a hard wood how can i do that ?

@ravenlorans 6 лет назад

Always Keep the Receipt. Take the Hole Bit Back when done drilling all your holes. This is a Great Idea and works in a pinch for Light Duty. About the only reason why I think you had a hard time going through the Particle Board was because you didn't sharpen the teeth you made. Won't stay sharp for long but will cut down on the burning and smoke from being completely dull (metal too soft to hold a edge for too long). I Guess if you didn't own a Dremel, you could use a Hacksaw and there fore this would be a "Hack" and putting the word "Hack" in the title would actually be one of the Few Times it gets used Correctly and Fittingly :)

@ShakeTheFuture 6 лет назад

Yes, i could have done a better job in sharpening it. Thank You for the suggestion.

@farvision 6 лет назад

Of course you CAN.

@ShakeTheFuture 6 лет назад

Yes, you can do it with a can

@dekurvajo 6 лет назад

For 15 euro you can buy a set of bits. Those are not super high quality, but reliable for DIY job. And because its a set, you will see which diameter is what you use the most.

@frikkiesmit2695 3 года назад

If a magnet sticks to it... Its steel not tin

@Grizzly_Lab 6 лет назад

Nice idea and #spoiler unexpected 😱😂😂

@ShakeTheFuture 6 лет назад

Thank You Grizzly!

@carlosgonzalezponce5187 6 лет назад

Buena idea, Hubieras entresacado los dientes para probar en madera

@RonLarhz 2 года назад

When u dont have those other tools to even make one....

@risunokairu Год назад

It didn't cut a hole in the plastic it friction melted the plastic. That's why the wood smoked.

@monochromatic_monkey2439 6 лет назад

btw where are you from?

@Theafghanistanbaby2 6 лет назад

SPAIN

@SurajGondkar 6 лет назад

Mavide D'Osconi Did you like despicito?

@ShakeTheFuture 6 лет назад

I am from Latvia, but I live in Spain.

@coondogtheman 6 лет назад

Over here we call those hole saws, like for cutting a hole for a doorknob or a dryer vent. Nice taste in music, smoke on the water. What else do you like to listen to?

@ShakeTheFuture 6 лет назад

Thank You! Oh, I listen a little bit of everything. From Led Zeppelin to Above and Beyond.

@coondogtheman 6 лет назад

Same here. do you have any favorite movie actors?

@i.g.noreme825 6 лет назад

Are you tempting me to make a smoke machine with this?

@ShakeTheFuture 6 лет назад

It was not the plan 😀

@evren.builds 6 лет назад

2:59 *SUPRISE DEEP PURPLE*

@ShakeTheFuture 6 лет назад

Oh Yeah!

@scootergreen3 5 лет назад

Good deal for people like me I'm not rich. You better wear gloves while cutting with that sharp can your fingers are very close to it. You don't want to injure them.

@wilsonjayasundara3608 2 года назад

Can i drill metal

@carlcarl5306 6 лет назад

Pretty impressive for a tin can. However the product may have been better if he offset the teeth like on a real blade.

@wunderbread7793 6 лет назад

Lol #6

@richardplester 2 года назад

Think about your health and safety guys PLEASE. Use low sugar/salt beans👍

@trapp7763 5 лет назад

I drilled a hole with a banana

@NBGTFO Год назад

I prefer to use an actual hole saw.

@ShepherdsChapelonYT 3 года назад

Let's turn to God Let's repent and ask for forgiveness Let's study God's word and thank God for sending Jesus and all He's is done Thank you God! Shepherdschapelcom Theseasonorg explains the whole Bible God bless

@Jstar7777 2 года назад

100th comment

@ambergonzalez7807 6 лет назад

Wat if ur trying to cut a coconut 😕

@markwright4923 2 года назад

Hmm l

@novikovmax8763 6 лет назад

Так а ты знаешь из-за чего дым идёт у твоего "произведения" ? И почему на синем тазу было отчетливо видно распавленный пластик. Потому что твоя хрень режет трением. Фигня это всё

@ShakeTheFuture 6 лет назад

Thanks for the feedback!Yes, I could have sharpened the teeth better to minimize the friction. It might be useless for some people, but it works very good for me. I don't care if the hole was cut with the friction or not, what matters is the result. Cheers!

@user-qs9gn4wy9x 6 лет назад

У тебя такое количество электроинструмента, и ты блять, придумал сделать из консервной банки коронку? ты превысил все возможные технико-экономические показатели почти 10 раз, вместо того чтобы пойти и купить корончатое сверло в любом магазине... ну или хотя бы циркуль использовал бы...

@mgdiaz2158 3 года назад

Just buy a hole saw for God's sake, they're cheap enough.

@FusionDeveloper 2 года назад

If you hate DIY tutorial videos do much, then why did you watch this video? Many times DIY concepts can transfer to other skill sets for problem solving unrelated problems.