No video :(

Can you Resin 3D Print outside in Snow?! 🥶 + Giveaway Winners!

Подписаться 494 тыс.

Просмотров 34 тыс.

50% 1

Attempting to 3D Print outside in the snow with a resin 3d printer... this is a horrible idea. Using a Mini Heater unit inside my Elegoo Mars 3 + Contest Winners
Thanks to Elegoo for Sponsoring today's video ➜
Elegoo Mars 3 ➜ amzn.to/3CQqkTN
Elegoo Jupiter Pre Order ➜ www.elegoo.com...
Elegoo Saturn ➜ geni.us/ABTdtjm
Elegoo Mercury X Bundle ➜ shrsl.com/33ha6
Elegoo Neptune 2 ➜ geni.us/2MWuj
Elegoo Mars 2 Pro ➜ geni.us/erkc
Elegoo Mars ➜ geni.us/GGUV82l
Elegoo Wash & Cure Station ➜ geni.us/hgyLGW
Elegoo ABS Like Resin ➜ geni.us/Lb9kl
Elegoo Washable Grey Resin ➜ geni.us/Ufg4
Resin 3D Printer Timelapse with ResinLapse!
Http://www.ResinLapse.com
Wham Bam Slap mats save 15% with code UJ2021 ➜ whambam3d.com/...
Mini Space Heater ➜
amzn.to/340P7ZF
Mini Busts by Doses3D ➜
/ doses3d
________________________________________________
Interested in other resin 3D Printers?
Peopoly Phenom ➜
www.matterhack...
Epax X10 ➜
epax3d.com/pro...
Elegoo Mars ➜ amzn.to/2xvAJVr
Anycubic Mono X ➜ geni.us/dmQqQ
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Full List - www.amazon.com...
Disposable Gloves - amzn.to/2Xjaxfo
Plastic Spatula - amzn.to/2Ijrhuy
Metal Spatula - amzn.to/2XgiHoS
Isopropyl (IPA) - amzn.to/2KoTsdY
Pickle Container - amzn.to/2KkWsrH
Funnel - amzn.to/2IjrrCa
Paint Filters - amzn.to/2XcpK1V
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 amzn.to/2GcCECB
CR-10 amzn.to/2Id9o1T
CR-10 S4 amzn.to/2UgWMbL
TinyMachines3D.com
www.tinymachin...
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoff...
_______________________________________________
Gear I'm Using ➜ www.amazon.com...
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
RU-vid ➜ / unclejessy
________________________________________________
Thanks for watching!
SEND STUFF TO ➜
Uncle Jessy
PO BOX 629
25 Goodburlet RD
Henrietta, NY 14467
#3DPrinting #Elegoo #UncleJessy

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 116

@Voidmonster 2 года назад

My poorly insulated garage gets into the low 60's. What I do is use an under-tank heating pad for aquariums. I take the vat out, sit it on the pad (covered) for 15-20 minutes and when the metal is up to 75 or so I start the print. So far it's worked great! Those heating pads are also pretty efficient. Like 40 watts for a small one, which is still a good deal bigger than the resin vat. I've also stuck the resin bottle back into the shipping box wrapped in the heating pad, but that takes longer and is a lot fiddlier to do, but may be the better solution for multiple printers.

@UncleJessy 2 года назад

Ohhh that sounds like a great option for people to checkout!

@tmilker 2 года назад

Ooh, those pads are just made of heating strips so you could theoretically find those(I know they made heating straps for bottles), wrap around a metal vat and regulate the resin temperature the entire time.

@plasticarcade 2 года назад

those work really well the especially because its for fish tank so it only gets so hot... I bought one of those ild heaters and out in my garage to keep temp in around 70 which works pretty good for me.

@Nereosis16 2 года назад

I just put my resin bottles in a bucket of warm water before I start the print and one of those heating mats warpped around the inside of the lid for my photon mono. Works like a dream

@lisaciscato255 Год назад

i will try reptiles heating pads to put on the back of the printer there are also heating cables and heating bands for beer fermentation :)

@SigurdDecroos 2 года назад

I use an inkbird thermostate with a Creality Ender enclosure (fire proof and other benefits), a small heater connected to the inkbird outside of the printer, but within the enclosure to get more stable temperatures for the resin. Works like a charm.

@17Mav 2 года назад

Waiting for the still shot of the printer in the snow to be made into a meme. "If you're cold, they're cold. Bring them inside."

@lucdoumen4597 2 года назад

For all those with the intention of buying a heater or whatever system to warm up your resin. Just try it out first. My cellar is nearly getting 15 degrees Celsius and the prints are perfect. With several types and brands of resin.

@kevinbroadley5422 2 года назад

You would think by now that resin 3D printers would come with some kind of resin heater built in them!

@RM_VFX 2 года назад

The UV lamps probably create enough heat under average conditions.

@Gabiethemighty Год назад

As a Canadian in an apartment, how can I 3d resin print in my spare room without dying due to fumes?

@gecko118 2 года назад

I use a small (about 8inx12in.) under tank reptile heater mat, cost me about 12 bucks on Amazon and tops out at about 90-95F. I currently have it frog taped to the outside back of the hood for my Elegoo Mars, turning it into a radiant heater, and it keeps the interior of the print bay at a nice 80F or so even when my room dips into the low 60's to 50'sF in the winter with the blackout cover I use from MACH5IVE.

@jimmyd4341 2 года назад

I use a reptile heating pad using the included sticky side to mount it on the inside of my plastic shroud on my mono x, keeps it around 20-24c inside my unheated garage. Haven't had a misprint all winter.

@lisaciscato255 Год назад

hello my friend i have anycubic photom m3 max and my garage is very cold i was thinking to use this metod , is it safe to stick the pad on the back of the enclousure ? i mean in the interior, how many W is your pad??

@jimmyd4341 Год назад

@@lisaciscato255 120v 16w, the sensor is a light sensor - that little sticker on the back of the case just blocks light and tells the sensor the hood is down. Perfectly fine to block it with the heating pad instead of the sticker just keep in mind your going to have to dremel out a tiny notch for the heating pad cord to come out so the hood sits flush. Good luck!

@RhantheSlayer 2 года назад

After a large amount of failed prints in the Australian winter last year, my solution was a heated blanket that I just covered the printer with. Clunky? Perhaps. Worked a treat? Definitely

@Nereosis16 2 года назад

That's what the lady at mitre 10 suggested to me when I came searching for a heated seedling mat. I might end up doing the same as you

@istegal8752 Год назад

Could you share photos or a tutorial? I’m currently in despair because of cold weather and 3d printing ….

@RhantheSlayer Год назад

@@istegal8752 only works if your printer is in some kind of enclosure, but just get a heated blanket, plug it in and put it over the printer, and just tuck the edges closer to the printer. Should help a lot

@robwalczak3300 2 года назад

I print in my cold basement, 62-68 deg F and I print fine. I think the heat from the internal UV lights do all the work as far as keeping the resin warm.

@3DPrintingNerd 2 года назад

I really need to get me some of those heaters!

@israelmartinez4097 2 года назад

I got mine yesterday and placed it inside my anycubic photon. Was using siraya tech blu and it printed with out issues considering it was 40 degrees out where I have my printer located.

@JamesBond-ff1nk 2 года назад

Would be nice if you could comment also the temp in Celsius. Saves the trouble for people not in the States to try to find out what you're talking about

@philippk819 7 месяцев назад

I just had a (maybe) pretty crazy idea...would an infrared heating panel pointed at the printer work? The advantage of such panels is that they don't heat the air but objects that are hit by the IR rays. Inside they are pretty efficient (at least when it comes to heating with electricity). I wonder if it would work outside. They are also not too expensive and there shouldn't be any fire hazard involved.

@Ellery-USA 2 года назад

I also use a heat enclosure with a small ceramic heater with my Anycubic Mono X in my garage. It was -6F outside today in Rochester, NY but my garage stays about 39F. I also try to use a Propane heater in my garage for myself to get the temp up to keep myself warm while painting.

@bitzbox 2 года назад

My Mars 3 certainly prints better in colder temperatures than my other printers. I usually have a little heater but I've managed flawless prints at 12c with it

@KernsJW 2 года назад

Congrats to the winners. I am still on the fence about getting into resin printing. I do have a need for one, but not in a rush! I have no room for everything needed. Those heaters do get pretty hot. I have one I use to keep my hands warm while flying drone and it has a low setting which doesnt get too hot

@blackhawkuh-6026 2 года назад

What do you need a resin printer for?

@KernsJW 2 года назад

@@blackhawkuh-6026 I built an injection mold machine and need molds. Been trying fdm prints and silicone to make the molds with a number of issues. I saw high temp resin molds being made and that looks like the best option. Just finding the room and clean area is a bit tough right now. Dealing with cleanup and the fact that I may only use it when a new mold is needed is keeping me from taking the plunge too. Tried ordering prints, but most places didnt have the high temp resin as an option.

@3dtomecoates92 2 года назад

I use that heater with the VIVOSUN Heatmat Thermostat to control the temperature and provide a safety factor on my Epax E10 in my garage. I glued some 1 inch cabinet magnets to the bottom of the heater and then used a 2 magnet stack per corner on the outside of the case - no drilling of the case and very stable.

@357Dejavu 2 года назад

Is there a similar sized product that is battery operated?

@joncastle9796 2 года назад

Thankyou!!!!!! Have just ordered one of these beauties from your link. Fingers crossed it will cure the hiatus that I've had in the chilly UK weather!

@dupuychile Год назад

How did it go???

@previctom 2 года назад

Amazing videos. I’m still new to 3D printing. Trying to soak up as much information as I can

@Aisaaax 20 дней назад

Cold isn't my concern. UV is. I was thinking of putting the printer on the balcony and printing in warm weather. I don't want to print in my apartment because of the fumes. But then I started thinking about UV and resin curing while I pour it (before the cover goes on) and also if the cover protects the printer well enough from outside UV. Any tips on that? 😮

@TAiiNE 2 года назад

That mini heater might be useful to have. With winter it gets STUFFY inside, and being on the 2nd floor of a 3 floor appartment, we don't even need the heater on. It easily gets up to 78f in here so a window being cracked open even with how cold it is outside is a must. My 3d printer sits in a corner and wonder if I could mount this, not inside but near by just to help when I do need that window cracked to get some fresh air and to just manage the temp with out having to throw the AC on in winter.

@deejaywolf 2 года назад

Is there any way to reagulate temperature (or just power input) on this? It's a little bit overkill, if temperature of printer is more than 30°C in snowy area:) Power input 200W is insane for such a small volume you need.

@chartle1 2 года назад

I wondered the same but I need to heat up a Glowforge. There are external thermostats but you need one that controls mains voltage.

@ilikenothingtoo 2 года назад

My basement stays at a stable 55ºf through out winter. The only thing I change is I bump the normal exposure .1 sec and the base 2 sec, never had any issues. Been doing it for 3 years now, with 4 different printers.

@mrgtoyz 2 года назад

Would love to see you test out some flexible/rubber resisns now that you got the heater. Stuff like Resione works but has to be well heated.

@TJsCraftShack 2 года назад

Congrats to the contest winners!!

@3D-Companions 2 года назад

I have been using a 180W personal PTC fan heater inside the Red dome. It's easy to maintain 25 Degrees centigrade. I did have problems when the temperature drops below 18 degrees. I believe the Elgoo 3 is the best in field for the price. I have an Peoploy Phenom it is very,very slow by comparison. Monochrome 4K &8K are the way to go.

@3DJapan 2 года назад

I can't even print in my garage in the winter. I bring my printer into my kitchen in the winter because I used to use it in the basement in the winter but with the more efficient furnace we had installed my basement is too cold as well.

@PlasticComplex 2 года назад

I would love to see a resin that can be used in colder conditions. I would buy the hell out of that.

@stephenmarston2743 2 года назад

what is the optimal temperature for resin printing? and what is too high/low?

@Grstearns 2 года назад

It will depend on the resin. I’m working with Resione M58 which is very temp sensitive and they recommend 75-95 F

@GeekDetour 2 года назад

Hey Uncle Jessy! Very fun video. The belt thing for beers looks very nice too! OH, OH! Did you get some weird jelly semi-cured jam in the VAT after opening the cover outside? I got really impressed how much UV you get outside even on a cloudy day - actually, even if you are inside your home, just by being close to the window you might screw the resin on the VAT and the part you printed.

@andrejspecht8217 2 года назад

This is actually a good idea. I would consider building up a printer locker in the garden complete with heating and bigger activated carbon filter instead of contaminating my workshop with epoxy fumes.

@shsebastian8 Год назад

how did it go? i just got a 3d resin printer and I want to print in my backyard... i live in a very hot place

@andrejspecht8217 Год назад

@@shsebastian8 in winter, the viscosity of the resin changed the instant i opened the door, so i printed in bulk to prevent fails. The odor of course wasn't a problem anymore. However someone wanted to steal it, fortunately i had steel doors installed, so it was just a minor vandalism damage. They couldn't topple the locker either, because i reiforced the foundation with steel rods. ;)

@ernestm8884 2 года назад

Yea that's going in the garage this weekend. ordering the heater right now.

@HayashiKaiji 2 года назад

After many fails, I resigned buying a heater for my Mono X. It's the exact heater you have in the video (since people recommended that model). I still have to figure out a way to get it in my Mono X though, I'm thinking of FDM printing something so I can blow the heat inside.

@RM_VFX 2 года назад

I'm surprised the resin didn't cure in the vat when you opened it since daylight is a strong UV source! I've seen people complain of a skin forming in the vat even with the red cover on.

@israelmartinez4097 2 года назад

I just ordered this and taped it into my anycubic photon. Will secure it better later on but just wanna test it right now. Using siraya tech blu resin. This resin used to work real good on this printer and as of late I’ve run into 90% failures. Supports snapping off even with slow lift speeds.

@plasticarcade 2 года назад

I got one of those heaters for my printing box and I returned it because it had a burning smell and I thought it might catch on fire, that said it could have just been my unit since others seem like theirs are fine.

@zbraten4097 2 года назад

What would you say is better the ellegoo Saturn or the anycubic photon mono X

@UncleJessy 2 года назад

Both are fantastic machines. Mono X is slightly taller, I use my Saturn more but there is a new 6K mono x on the market as well. Hit up both facebook groups and checkout the prints people post.

@johngeorge7126 Год назад

have you seen the heating strips that attach to the vat? it keeps the resin in vat at perfect temps so they say..

@Whiplash557 2 года назад

Whoa can't believe you made it work, that was cool!

@mattkeegan1359 2 года назад

i had to put a space heater in my closet where i do my fdm printing to keep the parts from warping as they do not have heated beds

@videomasters2468 2 года назад

will you be reviewing the new saturn S

@DeFrisselle 2 года назад

Oh, that's barely Cold You could have come up to the St. Lawrence Valley to try that in -10 to -32F Damn, I have that same Pelonis heater

@hyperionhelios190 2 года назад

Clayton can you riddle me this? does the Mars 2 vats fit on the Mars 3. I know not the right size but do the bolt holes line up and is it sort of centered over the screen? the mars 3 parts are slow to release and I'm wondering if I can somehow make the mars 2 parts work. Also it is much nicer that the mars 2 vats don't have silly curves or angles. the mars 3 vats don't stand up on edge well.

@MTGalterBoy 2 года назад

Ummmm… I print in my garage And it’s usually around 50° and I usually don’t have any problems with printing

@Ballador 2 года назад

what's the white stuff on your left eyelid?

@PhilSNight 2 года назад

585 Represent Baby!

@UncleJessy 2 года назад

🤘🤘

@Mobile_Dom 2 года назад

not started this video yet, but imma just say that my anycubic photon mono will fail to print in my office when its under 15c

@andrewhenderson3175 2 года назад

Come do this test in northern Minnesota now. It’s only -15 this morning

@bulletsie 2 года назад

I've been printing issue free here with my Elegoo Saturn with the room temp being 11c/51.8f. without any heaters Been printing full build plates of minis and busts. Only issue so far was last night when printing out a batch of circular bases I got what I can Ribbon Issue where a Ribbon like issue occurred and I needed to filter my resin, on reflection I noticed I did not use my regular USB stick I had accidently used the one that came with the printer so dunno if there is a connection. The original Mars printer however I'm finding impossible to get anything printed! nothing sticking to plate, sticking to the fep.......over here in miserable ol Ireland even during the spring and most of the summer temps in the room I print in tend to only get up to about 17c.

@marcins5584 Год назад

Did someone tested the ThermalVatBand?

@hyperionhelios190 2 года назад

93F is getting to the top end of resin guidance. I wonder if indoors it would get too hot since this unit isn't thermostatic at all.

@hyperionhelios190 2 года назад

Uh oh here come the spambots

@3dtomecoates92 2 года назад

I use that heater in my Epax E10 connected to a VIVOSUN heatmat thermostat off Amazon to hold a 76F temperature inside the cover. Also provides a bit of a safety control.

@TheSgtbidii 2 года назад

I Print outside in my garage. I just keep everything inside till I start the print. So far it worked

@michaszymanski2684 2 года назад

Hello. Do you have any info about Elegoo Mars 3 DLP version?

@ghetorange9604 2 года назад

This was an epic video, if Uncle J's 3d modeling skills are top notch, I would love to see a custom usable mask print not the movie mask, but a epic skill mask or bark mask XD I think a lot of people would drop some cash on a Uncle Jessy stl

@mikesvirtualhikeandtours1721 2 года назад

This was a fun one!

@snyyx 4 дня назад

You probably get that question a lot but what's in your eye?

@whiterose7055 2 года назад

LOL, Jessy you madman you! I guess it does prove a pint though...

@ronm6585 2 года назад

Thanks U.J.

@Born_Stellar 2 года назад

can you print outside if you keep the temps to normal inside temps? well, yeah, duh.

@mikek2824 Год назад

Wish you would have done it with out a heater

@chuck2703 6 месяцев назад

Won't work

@MidnightPanther113 2 года назад

Q: Can you resin print in the snow? A: Of course, if use a heater to keep it warm lol

@hbr3d_ 2 года назад

OH Cool !

@UncleJessy 2 года назад

Thanks for checking it out!

@DemonJamesPlays Год назад

i was hoping to learn if my garage was too cold, my first print failed. This video unfortunately didn't help cause you heated it and never actually printed in the cold

@marioperez2443 2 года назад

I love the intro!!!

@meriredetripsandclicks3153 2 года назад

95°F (ending temp) is 35°C

@mythyc9604 2 года назад

@abdulmoonirkhan3050 2 года назад

What's next ? 3d printing on a volcano?

@Hero1117a 2 года назад

Congratulations to the winner, what's on your eye?

@NoThankYou541 2 года назад

I am building something like this. I wish I had seen this sooner...lol such is life

@MrBurningrubber 2 года назад

You guys should look at the ptc heater created for the anycubic and just modify it to fit in the mars. VOG has an amazing video on this exactly, you can easily keep it at a constant temperature as it has a control unit and sensor.

@MrBurningrubber 2 года назад

Is this real ?

@daarionaharis3675 2 года назад

Can you 3D print a Packers logo or an Aaron Rodgers bust? Nevermind, it will fail.

@JimmiWazEre 2 года назад

Dude, thermostat!

@ygalion 2 года назад

Lucky winners

@SWAB737800 2 года назад

Litterally ordered this heater with a temp sensor a half hour before seeing this video. LOL

@hz_rd 2 года назад

can you link which one you found?

@rosascreativeworks5403 2 года назад

Wow, okay. 😬

@maythemighty5183 9 месяцев назад

I cant even print in my basement in the winter

@derekeet47 2 года назад

I don’t have a resin printer so I can’t even do this inside

@UncleJessy 2 года назад

Even better way to not run into resin print failures

@derekeet47 2 года назад

@@UncleJessy yeah that works too

@3dtechnologies153 2 года назад

I microwave the resin before using it.

@evilcreature_0435 2 года назад

now do it without a heater lol

@TJsCraftShack 2 года назад

I see everyone got the same message I got about being a chosen winner. Uncle Jessy??

@TheIcemanModdeler 2 года назад

I was contacted by an account with your face on it and a WhatsApp number saying I won something. I don’t know if the account belongs to you or if it’s fake. In the chance it’s fake you should warn people about it, can’t be too careful nowadays. Cheers.

@makewithmegma 2 года назад

💕🔥👍

@duck7927 2 года назад

took too damn long to get to the point

@Born_Stellar 2 года назад

well to be fair there was no real point to be made. he kept the temps up so all we discovered is that heaters work, and resin can print at normal resin printing temps.

@zbraten4097 2 года назад

hello there first

@UncleJessy 2 года назад

Hey now!