I followed this video and it greatly improved the ink flow. Thank you very much! Pero di parin napiprint ung green color for some reason kahit may ink pa and ok na ung flow by looking at the tubes.
2 days after the CISS is installed, I dunno what to do when I have this kind of problem 😭 Im not a technician nor IT expert but I try my best to follow and execute what's on your video and holla !! It's really worked 😭😍 THANK YOU SO MUCCCH
Ciss kit installed and works perfectly but after a couple of months the HP stops printing the problem is not with the cartridges but HP blocks the cartridges that are being re-used. And no amount of printer resets does the job. I have HP desk jet 3830, and I haven't found a solution to that. Ultimately to print I had to buy new cartridges after which it started printing normally. Now my question is how does one clear the ink level memory from the printers motherboard ???
Hi! This is a great help thanks for the video. Unfortunately, I still have another problem. Yellow ink is not working/printing. I tried cleaning and deep cleaning and I also printed a check pattern but there are only thin lines of yellow. Can you help me? It's also a Canon IP2770 Thank you!
@@wanderer3258 I solved the problem. You need to remove the ink cartridges from the printer and take a towel clean the print head. Take a little bowl of water. Don't fill the bowl with water just a tiny bit of water. dip the print head into the water for 2 minutes. Take a towl and dry it. Put the cartridge into the printer and run the deep clean twice. Then take a test print.
Paano nakatulong to?? Dame issue aprin yan. babalik at babalik yan gat d inaayos pagkalagay ng hose at butas ng cartradge . Same outpot parin kong ako costumer mo. Babalik ko nalang unit ko. hahaha
Wala pong yellow sa test print ng printer ko. Pagtingin ko sa loob, magenta na lang ang ink na nakadikit sa cartridge.. Yellow, cyan at black may hangin na sa tubes. Ito po ba ang dapat gawin para bumalik na ang kulay sa printer? Di na po ba needed ang suction?
Hello po. May question po ako. nag dry out po kasi yung magenta na ink ko. So ang ginawa ko po, pinush ko ng gamit syringe. So may flow na ulit yung ink. Pero kapag nagpiprint naman po ako ng color, nagguguhit guhit siya. May kulay na lumalabas kaso guhit guhit siya. Tapos sa nozzle check naman po, yung print head alignment pattern, lumalabas naman yung kulay blue at yellow pero guhit guhit po. Hindi siya solid na kulay. Tapos yung magenta po, guhit guhit din, tapos yung second line para sa magenta, wala ng lumalabas talaga na kulay. Paano po gagawin ko? Nag deep clean na po ako ilang beses. Same result.
