Capacity testing $95 280Ah LiFePO4 cells

Подписаться 9 тыс.

Просмотров 7 тыс.

50% 1

Learn how to build your own LiFePO4 battery here: geni.us/DIY-LiFePO4
Sign up to our email list for exclusive tips & discounts: geni.us/offgrid-email
Buy us a coffee (or beer): geni.us/Buy-Coffee
In this video, we're going to be capacity testing a set of 280Ah EVE LiFePO4 cells that cost us $95 each. These are pretty cheap and we were intrigued as to how well they would perform.
If you’re building an electrical system and need help, get in touch: geni.us/offgrid-contact
If you're not sure where to start with your Offgrid Power set-up, book a consult call with us: geni.us/offgrid-consult
Here are the links to Annie's website if you'd like to buy some of these cells: vapcelltech.en.alibaba.com or www.vapcelltech.com
--------------------------------------------------------------------------------------------------------------------
►▷ SUBSCRIBE TO OUR OFFGRID POWER RU-vid CHANNEL: geni.us/offgrid
►▷ SUBSCRIBE TO OUR OFFGRID WORKSHOP RU-vid CHANNEL: geni.us/offgridworkshop
►▷WATCH OUR LATEST OFFGRID POWER VIDEO: geni.us/offgrid-latest
►▷WATCH OUR LATEST OFFGRID WORKSHOP VIDEO: geni.us/OffgridWorkshop-Latest
►▷ SUBSCRIBE TO OUR EMAIL LIST: geni.us/offgrid-email
- FOLLOW US ON SOCIALS -
Instagram: / offgrid_power
TikTok: vm.tiktok.com/ZMejrWUS8/
Facebook: geni.us/offgrid-fb
- CONNECT WITH NIGEL -
Instagram: / nigelivy
Twitter: / nigelivy
Facebook: / nigelivyphoto
TikTok: vm.tiktok.com/JRBJWry/
Snapchat: / nigelivy
- CONNECT WITH ROGER -
Instagram: / roger_ivy
- GEAR -
Main Camera: geni.us/NigelsFavCam
Most Used Lens: geni.us/NigelsGenLens
Favourite Portrait Lens: geni.us/NigelsFavLens
Other Favourite Lens: geni.us/NigelsOtherLens
Favourite BIG Lens: geni.us/NigelsLongLens
Widest Lens: geni.us/NigelsWideLens
Drone: geni.us/NigelsFavDrone
Gimbal: geni.us/NigelsFavGimbal
Mic: geni.us/NigelsFavMic
Lav Mic: geni.us/NigelsFavLav
Favourite Little Camera: geni.us/NigelsVlogCam
Tripod Thing: geni.us/NigelsTripodThing
SSD Lifesaver: geni.us/NigelsFavSSD
Favourite Mini Audio Recorder: geni.us/NigelsFavAudio
BIG Audio Recorder: geni.us/NigelsMainAudio
Favourite Camera Bag: geni.us/NigelsIOtherCamBag
Second Favourite Camera Bag: geni.us/NigelsFavCamBag
Favourite Camera Strap: geni.us/NigelsFavCamStrap
Favourite Tripod: geni.us/NigelsFavTripod
ND Filter: geni.us/NigelsFavND
360 Camera: geni.us/NigelsFav360
SD Cards: geni.us/NigelsFavSD
** Some of the links on this page contain affiliate links that generate a small commission for us if you click them.
- MUSIC -
Musicbed SyncID: MB01SAB4Y57J5XJ
All music used in this video is licensed by Musicbed.com.
If you’d like to get a free month of Musicbed, use this link to sign up: www.musicbed.com/invite/vF4lN
#offgridpower #vanlife #solarpower

Опубликовано:

1 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@francoisguyot9770 8 месяцев назад

Hi Roger! Use some cone washers and jam nuts to preload the bus bar to torque spec that allows the bus bar to slip while keeping good contact while the cells expand and contract..You'll should get a better contact area against the flat surface area of the welded studs base, rather than count on the threads crest to bus edge. Also if you discharge and charge at close to 1C it is advisable to keep the cell in compression . Keep up the good work my friend!

@ericklein5097 5 месяцев назад

Just out of curiosity why are you still running the old 2 wire electronic loads? The original DL24 (150W/20A but actually can be adjusted up to 25A) are $22 shipped to my door off Aliexpress Their modular unit (DL24MP) is $70’ish or less if you catch it on sale for 600W/40A but absolutely requires additional heat dissipation or upgraded heatsinks for the mosfets. I use a 10” desk fan on its highest setting to keep it running under 55 Celsius when I’m running over 300W. You can apparently add more modules for 1200W but 40A remains the constant current limit. Should come out right at $100. Can’t touch that price with any other electronic load and even rigging up power resistors would be more expensive and less flexible.

@Step-n-Wolf 6 месяцев назад

There are washers that level the surface.

@MerryWang-mm1mb 10 месяцев назад

3.2v lifepo4 30ah/35ah/40ah/100ah/230ah/280ah/310ah battery cells available in Eu warehouse, welcome to contact

@tresleguas 10 месяцев назад

Help please... Is it possible to build a battery with the cells arranged in a different way than we usually see? I am planning to build a battery in which the cells are lying on their side...is this a bad idea...?

@tresleguas 10 месяцев назад

@camperman759 ...I was not able to find a file on the internet that explains the recommendations for using the cells... Do you have any material or link that you can share with me...? Thanks for your help

@francoisguyot9770 8 месяцев назад

No problem whatsoever. I actually stuff them that way in 4 rows of 4 cells in series on top four 1/2" plywood shelves secured between the studs of my garage. Since they are on a 16" center spacing, that leaves 14.5" space for 4 cells with nuts facing me for convenient connection and routing of the BMS and active balancer wires. Each row is connected to the next with a 12 inch 2 AWG flex stranded cable. A clear plexiglass plate cover all the exposed terminals to protect from accidental shorts. The BMS and AB are mounter on the other side of the stud together with the DC breakers. I found this setup very convenient as it really implements the concept of "PowerWall". So far I have 2 banks of 48 V laid that way, but I could have easily continued if I did not get a 19" rack for free from the Craigslist while buying 2 rack mount 10KW 48V modules that I got for very cheap. I just could not resist the deal... But to be honest the PowerWall concept is way more flexible AND accessible. Either way... Life is Good

@ericklein5097 5 месяцев назад

Yes there are bad ways to orient the cells. Solar Engineering has cells laying on their side (I guess you would say hamburger style/horizontal not vertical) and that plus no compression is causing swelling. I would only stand them up with compression. But that’s just me.

@jws3925 7 месяцев назад

What gauge wire is that? You stated it was 6 mm but that is like 2 gauge which obviously that cable is not. So what conversion do I look at. One table gives wire in mm and the other gives it in mm2. 6mm2 is similar to 10 gauge wire according to a chart that converts mm2 cabling to AWG. I get so confused on this conversion thing. Do we use the mm measurement or the mm2 measurement?

@casemodder89 5 дней назад

i know i'm 7 month late but for other visitors; wire cross section is always mm2 => millimeter squared. you never use the diameter. a copper busbar could be 300mm2 in a flat busbar that is 10mm height and 30mm width. also on top info: 4A per millimeter squared of cross section. so 50mm2 can carry 200A continuous in a DC usecase.

@goobiie 10 месяцев назад

Voltage drops significantly when you drew higher current from these batteries. I guess internal resistance are high. I would not buy these cells. Thanks for the video

@sugarpuffextrem 10 месяцев назад

The shunt have the bms between itself and battery negative terminal and the shunts positive lead is on the inverters input. 170amp through a 200a bms and through those relative thin and long battery cables will give quite a significant voltage drop and that is what the shunt is measuring in this configuration.

@goobiie 10 месяцев назад

@sugarpuffextrem do you think cable length and thickness caused this voltage drop?

@sugarpuffextrem 10 месяцев назад

and bms, the bms got so hot he couldnt touch it.@@goobiie