No video :(

Car M3 OBD2 Head Up Display HUD Review

Подписаться 1,2 тыс.

Просмотров 37 тыс.

50% 1

A short review of the M3 OBD2 Head Up Display HUD device with a built in Speed Limit Alarm feature and more. This Head Up Display is a very affordable OBD2 Plug and Play device and can be installed on most OBD2 vehicles but not alll. It will also read and display the Battery Voltage of your vehicle and the Temperature. It supports both KPH and MPH and is easily changed in the settings options of the device.
#headupdisplay #headsupdisplay #cartechnology
Popular Search Phrases:
Head Up Display
Heads Up Display
HUD
OBD2 Head Up Display
Head Up Display OBD2
OBD2 HUD
Lost your instruction manual? Find it here on my Instagram: instagram/shortwithtech.official

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 176

@Tales_xBRx Месяц назад

Muito bom! Melhor demonstração do produto impossível, todas as dúvidas que iam me surgindo no decorrer do vídeo você foi demonstrando, muito obrigado pelo seu esforço!

@SHORTwithTECH Месяц назад

Thank you very much 😀👍

@primezero6727 8 месяцев назад

Agreed the instructions could be better, I really like this one its very basic which is what I wanted. I like how its pretty much just the speed I'm going, I don't want distractions. Still struggling to figure out how to adjust the speed as the higher I go the more off it gets usually around 5 to 10 km. Pretty accurate till I go 40km or higher. Great Video thanks for making it.

@SHORTwithTECH 8 месяцев назад

Thank you I appreciate that. Thats interesting to hear how the speed reading is incorrect as your speed is increased, what year and model car do you have it installed on?

@primezero6727 8 месяцев назад

@@SHORTwithTECH A 2024 Mazda 3 Sedan, been rereading the instructions I think I might have figured out how to adjust it. Will try it out next time I go for a drive. I think I either need to either Press M and go to Speed that or hold M and go to 1 to adjust the speed.

@SHORTwithTECH 8 месяцев назад

@primezero6727 yeh, try this: 1. Press and Hold the M Button to enter the Settings menu 2. You need the first setting, which is Option 1, so you should see parameter 107 displayed now (in Kmh mode) 3. Now adjust the speed accuracy. e.g if Speedo displays 100Kmh but HUD displays 105Kmh then by default the algorithm should be 105-2=103 so simply change it to what you need. 4. Press and Hold the M Button to Save your changes and Exit Hope that helps you, if not then come back and we will try again, all the best

@primezero6727 8 месяцев назад

@@SHORTwithTECH Thank you for those very clear instructions, that fixed it for me. Its no longer off at both low and high speeds and is very accurate now, thank you very much for your help!

@SHORTwithTECH 8 месяцев назад

@primezero6727 No problem at all, your very welcome. Thank you so much for posting that feedback, it's very useful for my other viewers so I really appreciate it

@mingwaichow3984 7 месяцев назад

Thank you for your demonstration video, it is very helpful.👍

@nikitahomucheev1038 22 дня назад

Спасибо за субтитры! Я переводил через гугл переводчик! Полезное видео

@SHORTwithTECH 22 дня назад

Thank you so much, glad you found the video useful 😀

@BedsitBob 3 месяца назад

The speed reading may be perfect, when compared to the car's speedometer, but bear in mind that the speedometer is probably a bit off.

@SHORTwithTECH 3 месяца назад

Thank you for your comment

@imadeyoureadthis1500 22 дня назад

This is true but it’s better then gps as that can’t change with conditions like wind or tunnels, if you know how much your speedometer is off by then it’s fine

@BedsitBob 3 месяца назад

Are there any MOT implications, with regard to obstructing the view through the windscreen?

@SHORTwithTECH 3 месяца назад

Thank you for your comment. No

@loum.4377 2 месяца назад

Great job.

@SHORTwithTECH 2 месяца назад

Thank you

@ltnonehere 7 месяцев назад

Great video, i owned one and it works well, however i wonder what is 1 to 12 in menu setting, I’ve lost the instructions 😅

@SHORTwithTECH 7 месяцев назад

Thank you so much. Do you have Instagram? Your instruction manual is on my Instagram here: instagram/shortwithtech.official Hope that helps you 🙂

@ltnonehere 7 месяцев назад

@@SHORTwithTECH Nice!!! Thank you

@SHORTwithTECH 7 месяцев назад

@ltnonehere your welcome

@shayk8037 10 месяцев назад

Thanks for aweosme review, is it a lil blur in reality or its just in video? Also Does it have auto brightness, i mean does it get dim in night time?

@SHORTwithTECH 10 месяцев назад

Thanks man. No it's not blurry in reality, it's very clear in all lights although I do agree the video does make it look blurry, sorry about that. Yes it does have an auto photosensitivity mode or you can also adjust it manually with its 10 brightness settings

@shayk8037 10 месяцев назад

@@SHORTwithTECH thank you so much man! Thats a big help. Ordering mine right now.

@SHORTwithTECH 10 месяцев назад

@@shayk8037 your welcome

@kenwoolner8606 8 месяцев назад

Can it be changed to mph?

@SHORTwithTECH 8 месяцев назад

@kenwoolner8606 HI, Yes mph and kph are both supported, hope that helps you

@adamchecho822 7 дней назад

i got exactly the same hud display, but after plugged in. it only says 0 km/h and not changing anything while driving, how can i adjust it? hope u can help

@SHORTwithTECH 7 дней назад

@adamchecho822 What is the Year, Make and Model of the car ?

@kansai555 5 месяцев назад

Thank you. Does it obd2 work for subaru?

@SHORTwithTECH 5 месяцев назад

To be 100% sure it's best to ask the supplier. Here you go: a.aliexpress.com/_msPoUc2

@marcosmartinez8810 9 месяцев назад

Hola que tal, me puedes ayudar en programar para que coincida la velocidad del tablero con el display? Para que sea la misma velocidad en los dos. Muchas gracias

@SHORTwithTECH 9 месяцев назад

Lo siento mucho. no entiendo tu pregunta. La velocidad del HUD ya está programada para coincidir con el velocímetro de su automóvil y es muy precisa. ¿Es eso lo que quieres decir?

@armora2 15 дней назад

I’m in on a road in which the speed limit is 70 mph the beep sound is going to beep?

@SHORTwithTECH 15 дней назад

@@armora2 if you set it to beep at 70mph then yes

@DanIva-vn7vn Месяц назад

Hello. I have a Mercedes E250 2013. I have the same HUD model. I tried several ways to adjust the speed, either it is correct at low speed and not at high speed, or vice versa. Please help me

@SHORTwithTECH Месяц назад

@DanIva-vn7vn 1. Press and Hold the M Button to enter the Settings menu 2. You need the first setting, which is Option 1 3. Now adjust the speed accuracy. e.g if Speedo displays 100Kmh but HUD displays 105Kmh then by default the algorithm should be 105-2=103 so simply change it to what you need. 4. Press and Hold the M Button to Save your changes and Exit Hope that helps you

@edwardxuereb1222 6 месяцев назад

In installed it on an EV without adjusting anything. The speed shows fine but the water temperature icon keeps on flashing. Does anyone knows why?

@SHORTwithTECH 6 месяцев назад

What year and model EV is it? Is the car battery voltage displayed correct? Does the temperature reading seem to be accurate? Have you cleared the fault codes through the HUD?

@edwardxuereb1222 6 месяцев назад

It is a 2022 model MG4. I only have readings for the car inside and outside temperatures, but cannot confirm the temperature of the motor. I have not adjusted any of the HUD settings, but left them as set by the manufacturer.

@SHORTwithTECH 6 месяцев назад

@edwardxuereb1222 is the car battery voltage displayed correct? Have you tried to do a factory reset?

@sepehr1257 25 дней назад

If a car speedometer is in only MPH by default, would this hud show Kmh?

@SHORTwithTECH 25 дней назад

@sepehr1257 by default yes it would so you need to change it from Kmh to Mph 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you

@marcosdasilvacosta723 6 месяцев назад

Hello there! Thanks for the uploadt! Does it changes between displays automatically? If I wanna see the water temperature sometime do I need to press the buttons while driving? Is it in Celsius? Thanks!

@SHORTwithTECH 6 месяцев назад

Hi, no it doesn't change automatically, you need to push the button if your driving but when you stop and turn off the Ignition you can set it up to display the temperature for you automatically just before it shuts down. Yes its Celsius by default but it can be changed to fahrenheit in the settings, hope that helps you 🙂

@marcosdasilvacosta723 6 месяцев назад

@@SHORTwithTECH Yes that helped a lot. Thank you very much!

@SHORTwithTECH 6 месяцев назад

@@marcosdasilvacosta723 Glad I could help, have an amazing day 🙂

@UnlimitedKnifes 3 месяца назад

How do you change it to MPH?

@SHORTwithTECH 3 месяца назад

To switch to MPH do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you

@Kempyyyy 2 месяца назад

@@SHORTwithTECHyou legend

@colin5789 Месяц назад

I went to option 8 and switched it to 1 and it still says kph. I even checked to see if the 1 stuck and it did

@SHORTwithTECH Месяц назад

@colin5789 Try a Factory Reset first, to do that do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 12 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit Now switch it to MPH again like this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you

@colin5789 Месяц назад

@@SHORTwithTECH thank you for the help, I’ll give it a shot!

@primosebas8033 7 дней назад

It gave my jeep system park brake and air bag sensor error and check engine light on. As for the hud its working fine. How to fix this?

@SHORTwithTECH 7 дней назад

@primosebas8033 You will probably need a diagnostic scan tool to get rid of the errors but if that happened just from plugging it in then it could happen again. Don't plug in the device with the ignition turned on either, if that's what you did? Depending on the year of the vehicle, you could try disconnecting the negative battery terminal aswell for 60 seconds but no guarantee that will fix the errors. If your jeep is a 2010 or later,don't try doing that

@droitzer 2 дня назад

It’s happens to me a while ago.. it gives so many error, maybe because I plugin the HUD OB2 while the ignition is on. What I did it remove all attached to my car and restart my app. All errors is gone, I will try to plugin again tomorrow while the ignition is off, Hopes nothing happens. 🤞🏼

@SHORTwithTECH 2 дня назад

@droitzer your 100% correct. Never ever plug anything into the OBD2 Socket with the ignition turned on. When the ignition is turned on this wakes up the Canbus. You will definitely get errors doing that and some won't be easy or cheap to get rid of.

@droitzer День назад

@@SHORTwithTECH still the same.. even if I install it when car is off. It gives me error on my app. Any suggestions? My car is 2024 model

@SHORTwithTECH День назад

@@droitzer what type of car is it? A 2024 Make Model

@sweetvolcano2739 2 месяца назад

I got the same meter as you and found it lack the brightness a bit in daylight. Do you have the same issue?

@SHORTwithTECH 2 месяца назад

Only in extreme bright light, most of the time it's perfect for me. You can try turning up the brightness level manually in Option 7

@droitzer 2 дня назад

Happens to me a while ago, so many errors maybe because I plug in the OB2 while the ignition is on. What I did is I restart my mobile app and unplug everything in my car and it backs to normal. I’ll try again tomorrow plug-in the HUD OB2 while the car is off then let’s see if the problem will came back. Hope not..🤞🏼

@IV-A 4 месяца назад

Hey so this version has automatic brightness? Also why does the website say only gasoline cars? My car is diesel so it wont work what?

@SHORTwithTECH 4 месяца назад

Yes it does support auto brightness. I don't know why it says only gasoline cars on there website, I cannot guarantee it will work with your car, its best to ask the supplier first. One advantage of a GPS HUD over a OBD2 HUD is that it will work with all cars so something like this will work on diesels aswell ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AOfrtXDzQQA.htmlsi=YkzFDQ0UFCmBr0tf

@xx8dSb8xx Месяц назад

Do you have a Manual for this device? would you send me a picture of it please, i lost mine.

@SHORTwithTECH Месяц назад

@@xx8dSb8xx it is on my Instagram @shortwithtech.official

@akindel2528 6 месяцев назад

Thank you, Would this work on Dodge aveger 2011? Also, i did not see a link to the product. Is it available on Amazon?

@SHORTwithTECH 6 месяцев назад

It should work on a 2011. Best to check with the supplier to confirm that year first though. Here is the link a.aliexpress.com/_mKqrZFM. Hope that helps you, have a great day

@gxmy 4 месяца назад

@@SHORTwithTECHthe link doesn’t work anymore is there a new one?

@SHORTwithTECH 4 месяца назад

@gxmy you can do a search on aliexpress.com for M3 OBD2 HUD and you will find lots of suppliers selling these

@ob1tovr 3 месяца назад

Very late but does the speed limit thing also beep when your in a 70 or 80 zone? I assume so and if so is there any way to change beep sounds or set multiple with this? Again I assume no

@SHORTwithTECH 3 месяца назад

You are 100% correct with your assumptions. Yes the speed alarm will beep at whatever speed you set it to. And no, you cannot setup multiple speed alarms or change the sound of the beeping but like you I wish you could because multiple speed alarms would be a great feature to have

@ob1tovr 3 месяца назад

@@SHORTwithTECH ok thanks im probably ghonna buy one i keep thinking about it

@SHORTwithTECH 3 месяца назад

@ob1tovr yeh it's a great product. I will be uploading another HUD review in a few weeks so if your not urgent then maybe best to wait because the next HUD review is not one you will want to miss, im currently still testing it but it's a pretty amazing product

@ob1tovr 3 месяца назад

@@SHORTwithTECH ill wait then, im on my learners and i have 80 hrs atm and i wanna wait until im off my learners so i dont get to used to it then not when im doing my test

@SHORTwithTECH 3 месяца назад

@ob1tovr it's worth the wait to be honest. What kind of car will you be installing it in?

@abelbravosalinas3359 2 месяца назад

Do you have to turn it on/off every time you ues the car??

@SHORTwithTECH 2 месяца назад

No, it turns itself on and off when you turn the ignition on and off

@phantomblooper84 10 месяцев назад

Can you turn off the overspeed alarm?

@SHORTwithTECH 10 месяцев назад

Yes and No. You can't physically turn the overspeed alarm feature off, but you have two options to get around that problem. It can be set as high as 250Km so option 1 would be to set it to a higher speed or option 2 is just turn off the buzzer, there is a feature that just turns the buzzer off altogether. Hope that answers your question 🙂

@Dtm.15 2 месяца назад

@@SHORTwithTECHhow do you mute the alarm?

@SHORTwithTECH 2 месяца назад

@Dtm.15 Hold down the (-) button for approximately 3 seconds to mute the alarm, and repeat the same again to unmute it when needed

@H3SO88 2 месяца назад

Can you test the GPS version? M1 model

@SHORTwithTECH 2 месяца назад

I will look into doing that. I am actually filming another review on another HUD at the moment which will be uploaded in a few weeks but that's OBD2 aswell. This HUD is a very simple basic device but it is GPS and it is good so might be what you need ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AOfrtXDzQQA.htmlsi=B2lBpwh37HdB8E9p

@suss_ryzeyt8031 3 месяца назад

Hello I need help because when I’m trying to set the mode to speed but the speed is just saying 0km while I’m driving

@SHORTwithTECH 3 месяца назад

What is the car you have it installed on?

@suss_ryzeyt8031 3 месяца назад

@@SHORTwithTECH 2007 hummer h3

@SHORTwithTECH 3 месяца назад

@suss_ryzeyt8031 Try unplugging device and reconnecting. You can also try a factory reset under Option 12. If that doesntvwork its possible it's not compatible withn that vehicle

@user-hm3vg5mc4x 5 месяцев назад

Can I leave it plugged in the car without driving it fow a couple of weeks? Worried about battery drainage

@SHORTwithTECH 5 месяцев назад

That's not recommended but I personally have done that myself and have never had my battery drain

@kansai555 5 месяцев назад

@@SHORTwithTECHdrain battery that bad?!

@SHORTwithTECH 5 месяцев назад

@wenwang9049 no, I have never had my battery drain

@user-hm3vg5mc4x 5 месяцев назад

@@SHORTwithTECH why is it not recommended?

@SHORTwithTECH 5 месяцев назад

@user-hm3vg5mc4x just like any product you connect to a cars battery, eventually it will drain the battery. Its just a warning from the manufacturer, you dont need to be concerned about it

@BedsitBob 3 месяца назад

That overspeed alarm would get annoying very quickly.

@SHORTwithTECH 3 месяца назад

Thank you for your comment

@rogergant5502 Месяц назад

Why didn’t you use this video to show how to calibrate the device?

@SHORTwithTECH Месяц назад

@rogergant5502 device is plug and play, no calibration was required at all when reviewing this device

@ramdhanid.4188 9 месяцев назад

Is this compatible for all cars? I installed this on a Nissan Micra but it only displays zero value

@SHORTwithTECH 9 месяцев назад

It should be compatible with most cars, but not all cars no. What year Micra is it? it's petrol and not diesel right?

@ramdhanid.4188 9 месяцев назад

@@SHORTwithTECH Micra 2011, petrol engine

@SHORTwithTECH 9 месяцев назад

@@ramdhanid.4188 oh, 2011 is not an old model. I would expect that to work no problem. Is it just the speedometer feature that is not working? Do the battery and temperature features work? Does the cars original speedometer work?

@ramdhanid.4188 9 месяцев назад

@@SHORTwithTECH The original display is normal, no problem. Just display battery voltage

@SHORTwithTECH 9 месяцев назад

@ramdhanid.4188 I don't have alot of experience with Nissan unfortunately but i would expect all Micras from 2007 onwards to work with this device. Do you know how to read live data parameters through your OBD2 port? If you can successfully read the parameters then the problem is with your HUD so open it up and check for poor soldering or bad connections is what i would do. If you cannot read parameters then it means a 2011 Micra is not compatible with this device which is surprising to hear

@Youremywifenkwdave 6 месяцев назад

Mine was advertised as GPS but can’t see anything about that on the instructions 😊

@SHORTwithTECH 6 месяцев назад

No this one is not GPS

@Youremywifenkwdave 6 месяцев назад

@@SHORTwithTECH Car HUD Head Up Display OBD2/GPS Overspeed Warning System Projector Windshield

@SHORTwithTECH 6 месяцев назад

@@Youremywifenkwdave HI, the link to this device is here a.aliexpress.com/_ms2nQ9M It is not GPS, thanks

@Chris2k33 20 дней назад

Can the device switch to MPH?

@SHORTwithTECH 20 дней назад

@Chris2k33 To switch to MPH do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you

@user-tp9nq3fg2h 6 месяцев назад

Is it suitable for toyota innova, mate?

@SHORTwithTECH 6 месяцев назад

Sorry I'm not 100% sure. If it's a late model I'm guessing it should be ok. So far from what my viewers have told me, Nissan has been a problem, Mazda was fine and VW but no one has mentioned Toyota. The supplier will be able to confirm that for you though, contact them through this link, best of luck, please keep us all updated incase others are trying to install it on that same car a.aliexpress.com/_m0XqjQi

@Portella78 2 месяца назад

Can this speed beep be removed?

@SHORTwithTECH 2 месяца назад

Hi, yes it can, you need to do this: Press and Hold the (-) Button for a few seconds to turn the buzzer Off. To Turn the buzzer back on again repeat the same procedure. Hope that helps you out

@Portella78 2 месяца назад

@@SHORTwithTECH TK brother!

@charleszheng1796 3 месяца назад

Is there a way to switch to mph?

@SHORTwithTECH 3 месяца назад

1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you

@AQ40V 5 месяцев назад

Is the speed accurate?

@SHORTwithTECH 5 месяцев назад

On my volkswagen it's absolutely perfect yes but other cars may be different

@elijahgross2432 2 месяца назад

How do I change from km to mph

@SHORTwithTECH 2 месяца назад

@kuzuriii 4 месяца назад

Can km/h be changed to mp/h?

@SHORTwithTECH 4 месяца назад

Yes, you can change kph to mph in the settings

@mrdexb313 Месяц назад

How do i buy it?

@SHORTwithTECH Месяц назад

@mrdexb313 you can buy it from aliexpress.com There is now a new updated version available

@sookhapatah 7 месяцев назад

Can we change km to miles¿

@SHORTwithTECH 7 месяцев назад

Yes you can, you need to do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you

@shotglass80 8 месяцев назад

Link to product please?

@SHORTwithTECH 8 месяцев назад

Sure, here you go a.aliexpress.com/_mO9tYs8

@dejavuprince193 5 месяцев назад

I’ve plugged it into my car, however it’ll read the battery voltage but not my car speed. It remains at 0km although I’m driving. It’s a 2008 allion Toyota vehicle. Any advice?

@SHORTwithTECH 5 месяцев назад

Does it read the temperature?

@dejavuprince193 5 месяцев назад

@@SHORTwithTECH that’s also at 0

@SHORTwithTECH 5 месяцев назад

@dejavuprince193 ok so this means that it is not communicating with the obd2 port of your car. It powers up fine though so it's either faulty or not compatible with your car. Is this a US version?

@dejavuprince193 5 месяцев назад

@@SHORTwithTECH no Japanese made

@SHORTwithTECH 5 месяцев назад

@dejavuprince193 if you have a obd2 code reader you can plug it in just to test your obd2 connector is functioning correctly

@marks9676 3 месяца назад

You had to remove a lot of trim … what she said 😂😂😂😂

@SHORTwithTECH 3 месяца назад

Yeh, making the installation look as tidy as possible requires extra work

@morganmcguinness9923 9 месяцев назад

Where did you get this from do you have a link?

@SHORTwithTECH 9 месяцев назад

Yes sure, here you go: a.aliexpress.com/_mK1lYuu

@morganmcguinness9923 8 месяцев назад

@@SHORTwithTECHMine arrived and everything fine. However seems very inaccurate

@SHORTwithTECH 8 месяцев назад

@morganmcguinness9923 that's interesting because mine is perfectly accurate. Are you referring to the speed accuracy? What type of car did you install it to?

@morganmcguinness9923 8 месяцев назад

@@SHORTwithTECH speed accuracy yes in mph. Ford Mustang

@SHORTwithTECH 8 месяцев назад

@@morganmcguinness9923 how inaccurate is it?

@FBPrepping 2 месяца назад

Not trying to rain in your parade, I think these devices are great, but I am concerned about they being plugged and pulling the data constantly from the ECU...the "brain" of the car so to speak...this could burn the electronic unit? the obd2 port is not made for continuous data pulling after all... just wondering if it's safe to use all the time.

@SHORTwithTECH 2 месяца назад

Your Gateway will not burn out, the OBD2 Port is just a communication port. If this concerns you there is always a GPS HUD which doesn't connect to your car at all and works just aswell but with limited functionality compared to OBD2 of course, for example, like this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AOfrtXDzQQA.htmlsi=CKTHDs4_ddCbQSUR

@australianllama3114 6 месяцев назад

at 7:55 you were going 70 and it was displaying 56?

@SHORTwithTECH 6 месяцев назад

It looks like that from that camera angle of the speedometer, it is 100% perfectly accurate in my VW

@australianllama3114 6 месяцев назад

@@SHORTwithTECH ohh okay thank you so much for the reply. I was just curious that's all. Thank you! Just curious are most OBD2 speedometers accurate like this? Cause I got a GPS one and it is way off and delayed

@SHORTwithTECH 6 месяцев назад

@australianllama3114 sorry, i'm unsure of other devices, this is the only HUD i have reviewed so far and I can definitely recommend it. Have a great day

@officialcrazydonut6856 Месяц назад

Can you mute it?

@officialcrazydonut6856 Месяц назад

I don’t want it to beep

@SHORTwithTECH Месяц назад

Hold down the (-) button for approximately 3 seconds to mute the alarm, and repeat the same again to unmute it when needed

@SHORTwithTECH Месяц назад

@officialcrazydonut6856 Hold down the (-) button for approximately 3 seconds to mute the alarm, and repeat the same again to unmute it when needed

@849568 4 месяца назад

Чего это Вы, всю машину разобрали?😅

@SHORTwithTECH 4 месяца назад

Yeh routing wires inside the car can be so much fun 😀

@bxthorn3100 8 месяцев назад

how do you switch to MPH mine only gives kmh

@SHORTwithTECH 8 месяцев назад

To switch to MPH you need to do this: 1. Press and Hold the M Button to enter the Settings menu 2. Now your In the settings menu choose Option 8 3. Change Parameter value from the default value which is '0' to '1' 4. Press and Hold the M Button to Save your changes and Exit 0=Kph and 1= Mph, hope that helps you