Cara cek jalur kabel pengapian yamaha RX King, Rx Spesial mulaibdari spul jalan dan cdinya sampai hidup.
Langkah pertama kita cek adalah jalur dari spul:
1.kabel hitam garis merah dari spul jalan sebagai spul pengapain harus ada arusnya.
2.kabel hitam dari spul jalan sebagai masa spul pastikan terpasang ke bodi motor.
3.kabel putih garis merah atau putih garis hijau sebagai pulser pastikan ada arusnya menuju CDI.dan cek gunakan dengan lampu led bekas gasolin gas.
4.kabel putih sebagai pengisian menuju kiprok.
5.kabel kuning garis merah sebagi arus lampu yang menuju kiprok.
Dan untuk kabel putih polos dan kuning garis merah tidak ada kaitannya dengan jalur pengapian.
Untuk jalur cdinya adalah sebagai berikut:
1.kabel hitam garis merah arus pengapian dari spul.
2.kabel putih garis merah atau putih garis hijau jalur pulser.
3.kabel outih garis hitam adalah jalur yang menuju ke kunci kontak.
4.kabel orange adalah arus pengapian keluaran dari CDI yang menuju ke koil dan pastikan ada arusnya.
5.kabel hitam adalah sebagai masa atau groundnya CDI dan pastikan terpasang ke bodi atau rangka motor.
Terima kasih banyak kepada semua #SUBSCRIBER#
dan penonton dimanapun anda berada semoga ilmunya bermanfaat.
mohon #SUBSCRIBENYA#
@Sidik Nuryaden CHANNEL.
Apabila ada yang ditanyakan silahkan tulis dikolom komentar.
Telp/WA: 085863491419.
Terima Kasih Banyak.
How to check the ignition cable path for the Yamaha RX King, Rx Special starting from the road spool and the cdi until it comes to life.
The first step we check is the path of the spool:
1. The black wire with the red line from the road spool as the ignition spool must have a current.
2. The black cable from the road spool as a spool make sure it is attached to the motor body.
3. white wire red line or white line green as a pulser make sure there is current going to CDI.
4. white cable as charging to kiprok.
5. yellow wire red line as the current to the lamp kiprok.
And for plain white and yellow wires the red line has nothing to do with the ignition line.
The cdi path is as follows:
1. black wire red line ignition current from the spool.
2. white wire red line or white line green line pulser.
3. Outih black line is the path leading to the ignition.
4. the orange wire is the ignition current output from the CDI that goes to the coil and make sure there is a current.
5. The black cable is the CDI mass or ground and make sure it is attached to the motor body or frame.
Thank you so much to all #SUBSCRIBER#
and the audience wherever you are, hopefully the knowledge is useful.
please #subscribe#
@Sidik Nuryaden CHANNEL.
If you have any questions, please write them in the comments.
Tel/WA: 085863491419.
How to check the ignition cable path for the Yamaha RX King, Rx Special starting from the road spool and the cdi until it comes to life.
The first step we check is the path of the spool:
1. The black wire with the red line from the road spool as the ignition spool must have a current.
2. The black cable from the road spool as a spool make sure it is attached to the motor body.
3. white wire red line or white line green as a pulser make sure there is current going to CDI.
4. white cable as charging to kiprok.
5. yellow wire red line as the current to the lamp kiprok.
And for plain white and yellow wires the red line has nothing to do with the ignition line.
The cdi path is as follows:
1. black wire red line ignition current from the spool.
2. white wire red line or white line green line pulser.
3. Outih black line is the path leading to the ignition.
4. the orange wire is the ignition current output from the CDI that goes to the coil and make sure there is a current.
5. The black cable is the CDI mass or ground and make sure it is attached to the motor body or frame.
Thank you so much to all #SUBSCRIBER#
and the audience wherever you are, hopefully the knowledge is useful.
please #subscribe#
@Sidik Nuryaden CHANNEL.
If you have any questions, please write them in the comments.
Tel/WA: 085863491419.
25 авг 2024
