Carburetor Replacement On Echo PB265L Back Pack Leaf Blower

Подписаться 404 тыс.

Просмотров 192 тыс.

50% 1

Carburetor Replacement On Echo PB265L Back Pack Leaf Blower
In this video I show you how to replace a Carburetor on an Echo leaf blower.
Part number for carburetor is A021001591 from Echo.
Buy a new carburetor here; www.repairclini...
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Champion, Murray, John Deere, Craftsman, MTD, AYP, etc.
Visit my channel for more repair videos;
www.youtube.com...
Help me make videos or buy me a coffee!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
Customer Thought His Jonsered Chainsaw Was Blown-Up! #shorts
If you enjoy my small engine repair videos make sure to comment, share, thumbs up and subscribe. Thanks for watching!
Easy to follow and thorough step by step tutorials do it yourself (DIY) videos to help you with your broken lawn and garden equipment including snowblowers and zero turn mowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, zero turn mower, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on RU-vid and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on RU-vid to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #shorts #stihl

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 192

@kauaiphotography 12 лет назад

Aloha Dony! Me from Hawaii - again! Just curious, when you took the black cover (where the trottle cable attaches) off the carb, did you notice the small roller part? Could it be that it was not installed back when you put the carb back together? I believe that might of been the problem? On a slightly different note, I have never had much success with "re-using" the carb parts (diaphgram and gaskets) when ever I take one apart, so I just plan on changing it, so glad you tried that too. Tom

@dblixt1 12 лет назад

How about adding some HEET in the gas tank? I have done that. What is your opinion Dony?

@flawdanative3223 3 года назад

NOW, That's how you make a DIY... VIDEO!!! Thank You!

@donyboy73 3 года назад

You bet!

@marshallborder9089 6 лет назад

Good lesson : before I started working on these two cycle had my Stihl weedeater in one shop and they overhauled the carb , it lasted one season and the same thing started happening again. Well then I put it in the Stihl dealerships shop and they installed a new carb , they told me they hadn't had any luck with putting kits in them . So it cost more but on my third year with it with no trouble yet , so there's not that much difference in the price of the kit and labor cost verses the new carb . Been working on these two cycles and that what I've been telling the customers and the new Carbs I'm installing are fixing the problems and new gas lines and filters alone with them- cause most the time there usually from 5 to 8 year old units and the gas lines are failing by that age .Thanks again for your lessons they are very educational, we never get to old to learn either .

@wcjcnc 10 лет назад

That carburetor has a hidden adjustment screw in it that's causing your problem. The screw is hidden inside the body of the carb under the little round brass piece sticking out of the carb body. Remove the brass piece and throw it away. Also remove the black plastic plug under the brass piece and discard it as well. Then you can see the VERY tiny adjustment screw down in the hole. Remove it and clean it and the passage it's in. Put it back in and screw it in all the way until it's snug then back it out half a turn. Put everything back together and start the machine. Adjust that tiny screw with the machine running at full throttle.

@donyboy73 12 лет назад

cost of carb is $100, cost of a new machine is over $300

@THEMOWERMEDIC1 12 лет назад

I HATE ZAMA CARBS!!! EXCELLENT VID AS ALWAYS DON!

@michaelgarnett1196 3 года назад

Donny can you get me the carburetor numbers I need that carburetor but can’t find one to order it thanks love all your videos so helpful

@k3w1b3an5 8 лет назад

Nice video. Those Echo replacement carburetors are like $13.00 -$19.00 on Amazon. Takes less than 10 minutes to swap them out. Beats the hell out of taking them apart and repairing them with a kit.

@Vfh........y 7 лет назад

T Bone yep......eBay as well.....low low prices. I have no problems with these cheap carbs. PB 603 and PB 500

@BigRedKer 12 лет назад

I am learning a lot from watching your videos. Thank you for producing them and making them available for everyone. You do a great job of putting these together. Keep up the good work! Mike

@doublewide6 12 лет назад

Donny, Have you ever tried using an ultrasonic cleaner to clean the carbs without the hi and low screws?

@donyboy73 12 лет назад

it's probably a faulty oil sensor or the wire is disconnected from it, it is usually located near the oil filter

@donyboy73 12 лет назад

castrol, echo or stihl oil

@MattsRageFitGarage 8 лет назад

I noticed upon reassembly of the carburetor you had lost the little roller that ramps up the throttle barrel, the pin it sits on can be seen at 7:42. This will cause problems as poor acceleration/ dying as the throttle barrel will open but not ramp up and let more fuel out the emulsion tube.. Also, there is a high speed jet behind that brass fitting with the plastic inside it. The bushing comes out if you heat a screwdriver small enough to fit inside, heat the flat head that will fit with a propane torch until red hot then put it in the plastic so it will melt it. Then once it melts past you can unscrew the high speed jet and it will push the bushing right out. Now you can clean the high speed jet and you now have a high speed mixture adjustment. However, the bushing will NOT come out with the plastic primer base still attached, it will overhang. Learned all this the hard way. Fixed several of these carbs that wouldn't run right this way.

@johnmanning1006 5 лет назад

dony is pretty good I wonder why he did not know about the roller bearing. what you think

@bigbob0042 5 лет назад

if you look closely the roller bearing that is mentioned is on that shaft , look when he takes of the throttle valve compared to when he puts it back on , its there both times look at Echo Gt-225 Carb Bogging & Flat Spot video and you can see his bearing is missing LOL , Dony knows what he's doin

@donyboy73 12 лет назад

it was $100 here in canada but it will be cheaper in the US

@donyboy73 12 лет назад

some older carbs like that had the adjustments you're talking about but not this one

@MrMaxflip 10 лет назад

hi .dony I have 265l blower it starts but will not run on the run position it dies out...The carburetor brand new I also looked at the muffler its clean. can you tell me where else can I look at on the blower... thanks

@jessecoleman2271 5 лет назад

If the motor is past its break in period than you need to adjust your high speed jett as the gentleman in the above comment stated...remove the primer base and remove the restriction plug...(black in color) . this will more than likley bring your unit back to life. Let me know your results. These instructions are for a new carb on a older unit.

@donyboy73 12 лет назад

not very often

@donyboy73 12 лет назад

yes usually they have to come off to be able to turn the screws fully

@CHIBA280CRV 9 лет назад

Hey Donny when I prime the bulb it stays stuck in the pushed in position, and it takes a while to pop back out ! when I disconnected from the carb feed line it works fine 😳 the unit kicks on then shuts off like yours. Then it does not come on till take out the spark plug for a while...I do not know if it is not getting enough air or what ?😭 HELP!.

@donyboy73 12 лет назад

thanks, i'm saving up for one, like you say it does a much better job, also then i will be 100% sure the carb is garbage if it still doesn't work. I have a Tecomec chain sharpener from Italy

@iancameron1662 3 года назад

Hi. I have one of these echo backpacks .for some reason its doesnt start.can you help ..it got fuel.a new carb.cleaned and reset gap on plug.any other ideas or problems these backpacks have. Thank you

@jbuilds1 12 лет назад

i rebuilt the whole carb and this was the last thing i had to do, just remove a jet and i blew it. Do you think I could get away with leaving it in there? I'm pretty sure the pilot jet is not clean and this bike had been sitting for years, but if everything else is clean, could the carb still function somewhat?

@donyboy73 11 лет назад

yep, cheaper to replace the carb, however here in canada the carb is $100!

@douro20 12 лет назад

With a bypass-primed carburetor as this has it should start up on the first pull...I used to have a McCulloch trimmer with a license-built Kioritz F1-P engine and there was hardly a time when it wouldn't start up on the first pull...

@donyboy73 12 лет назад

@Usernameinvalid16 usally it won't have any compression

@donyboy73 12 лет назад

lol, thanks for watching, hope you enjoyed your chicken

@dwoodog 12 лет назад

You didn't show how you cleaned out the fuel tank since when you emptied the original fuel out a bunch of debris came out too. I've had my share of tinkering with them. I just fix/tinker with my own equipment, but I'm at the point now where if a minimal amount of tinkering/cleaning/adjusting doesn't solve the problem I either buy a new carb, or whole new trimmer, blower, saw, etc...... whatever it may be.

@siemenstraffic 12 лет назад

Reason why there was water in the fuel was due to the ethanol drew moisture from the air and got mixed whit the fuel! I talked to some of mechanics at local repair shops where I live. They never rebult or fixes carbs on a 2 stroke engine any longer, they just replace them since the since the introduction of ethanol in unleaded gas, problems quickly arouse that the ethanol is eating up the internal parts and and moisture water promote corrosion inside aluminum carb making them non repairable!

@mrbluenun 12 лет назад

Hi there donyboy73, Did you ever trace the problem? I know it was a lot larger but I had a mini car 1000 cc engine with exactly the same symptoms and it looked fine while apart but it had the tiniest of pin holes which stopped the vacuum working. What was the cost of this machine and the new carb? Keep making those great vidoes. Take care, mrbluenun

@savagenomore 12 лет назад

I hate that stuff, I will not buy gas if I see that sticker on the pumps, I will go somewhere else, I'm lucky to still have stores that don't sell it..

@0rangevale 9 лет назад

I just wanted to say, excellent video and to share with you my bogging problem on a PB-265. I had the same scenario with water in the fuel but noticed you did not remove the small mesh fuel filter. This is where I found the water, one small droplet and some slight corrosion. I soaked the carb body in carburetor fluid over night, blew out the holes, slapped it all back together and voila!

@Tristan102100 12 лет назад

here in california,we take the air filter off porposley to cold start any smal engine...i don't know if canada's weather makes any difference with that,but it actually helps california's engines start!

@TheKevzho 12 лет назад

Hi. I just wanted to ask if you know anything about tractors? I have a Hinomoto E28 tractor and after using it was left in the 'ON' position. Battery went flat so gave it a charge. Went to crank it up but the oil light went on and engine would not turn. took out the old oil and put in new oil. This time the engine will turn but the oil light is still on. I'm scared to start it up because of the light. Do you know what I can do? Thanks!

@kenweimann8161 12 лет назад

Those rotary carbs are garbage. I've never rebuilt one that ran properly afterward. Most I see are in redmax blowers and Ryobi/Homelite equipment. Now I see them more often in Echo and Stihl products. Must be a really lean EPA compliant design. Don't even think of repairing a rotary carb, just get a new one and save all the labor costs. Your customers will thank you.

@ackack1 12 лет назад

That is a rotary style carb. For some reason you see those often on backpacks.The high & low adjustment screws are different than what you find on the basic cube-style carb. Dony, did you try to adjust the old carb before you decided it was faulty? Sure would like to see you do a video on adjusting rotary carbs.

@snowballis2cute 12 лет назад

I have a 10HP Tecumseh Mod#HM100 SPEC#159493V FAM#4TPXS.3582BA Recoil Starter Spring is Broken, here in FL I am told I can't just get the spring, and their are 2 numbers for the whole pully and spring what's up $18-30.00 cost! for that I'll grind a slot in the top and use a rope to start it! Will any other spring work? Thanks a Bunch

@Thebowzer221 12 лет назад

don, sthil back pack blower. Trying to adjust mixture on carb. There 2 red plastic pcs on top of those screws. Do I have 2 remove these to B able to adjust mixture? Model BR340? I will start with Low idle screw and then High runing screw. I have seen U do this. Thanks, ur site is great. Themman

@hughwynn6193 3 года назад

@donyboy73 - Could you please show us how to adjust the low and high speed on a Walbro carburetor model WYG-14 on a Echo PB-2620 handheld leaf blower? Many thanks in advance

@donyboy73 12 лет назад

lol, make sure you have watched my collection of over 600 videos!

@donyboy73 11 лет назад

from factory, doesn't matter though

@akidojlaw537 11 лет назад

Donny, again you are a master at the camera work, editing etc. The more I look at other mechanics films and edits, the more I appreciate yours. Thank you, I now have a way to approach the same problem.

@gushhnet 12 лет назад

I have a similar unit by homelite, the thing doesn't even have an air filter, any ideas on adapting one? the whole roto-choke deal is one of the most retarded features I've seen in small engines thus far...

@old64goat 12 лет назад

If I tried doing that to the carb you can be sure the machine would never work again. This work can only be done by a pro like you Donny, with my bad eyesight I would have to get a new machine. I had a leaf blower for 5 years, carb went bad, got rid of it and bought a small Echo hand held, it still running good so far..LOL. Great video Donny Thanks for posting.

@donyboy73 12 лет назад

that's what i would try with caution

@donyboy73 12 лет назад

hard to say, carb can be funny sometimes

@BriggsMower 12 лет назад

yet another dodgy zama i had to fix a leaf blower that would not start it was a bad zama carb it was about 3 years old i will only stick with walbro

@donyboy73 12 лет назад

lol, have to think about that

@SteveRobReviews 12 лет назад

Well done !! The carb looked like new with the carb kit in it but was wondering if the water in the gas would make intrernal passages blocked so much that they could not be cleaned.

@redblue40rc33 5 лет назад

the trash in the gas is an indication that trash is in the fuel jets stopping the fuel flow...making it running really lean and stopping....not a carburetor problem......jsn....the jet holes are like a human hair diameter....anything can stop the gas from flowing

@outdoorsman310 12 лет назад

take one from another recoil or something or try to make a rope like you said

@donyboy73 12 лет назад

$100

@donyboy73 12 лет назад

$100

@geo8841 2 года назад

Hi my 265L does not start compression is it 71.5 please advise cleaned carb new fuel using tru fuel now cleaned

@zx8401ztv 12 лет назад

Looks like they are a very touchy carburettor, the owner will have to be more carefull.

@donyboy73 12 лет назад

thanks for watching

@donyboy73 12 лет назад

thanks for watching

@bmxteasers 10 лет назад

i reckon the biggest problem about these zamas are where there made.... china, they have to be the worst carbs out there. and that's comming from a small engine machinic as well. stupid how a good Japanese machine uses a chinese carb..

@donyboy73 11 лет назад

not necessarily

@donyboy73 12 лет назад

sure does!

@dblixt1 12 лет назад

Gas is blowing out of the gas cap on my leaf blower.. any suggestions on what the issue is?

@mitchellgarrett7055 2 года назад

There is not reason to remove carb. Dump the fuel and then purge the carp by pumping the bulb dump again. . Put a n ounce of fuel in it and purge again and dump again. Fill it up and you done. Please

@donyboy73 12 лет назад

that's a possibility

@donyboy73 12 лет назад

you're welcome

@donyboy73 12 лет назад

yes it's pretty well the ay it's going

@donyboy73 11 лет назад

lol

@livingwaters7841 3 месяца назад

Love this guys vids, thank you so much got lending us your knowledge.

@redlense4 12 лет назад

Hmmm... What do you think was wrong with the carb? It looked fine.

@rwbishop 12 лет назад

Whenever I take something apart that I un-familiar with, I like to take a lot of digital photos documenting the process. Doing so has saved loads of frustration... Great videos, Thanks!

@Popclone 4 года назад

Why dose the manual (for this model ) say Fuel and Oil Mixture ? Is that blue color the oil in the fuel mixed ?

@donyboy73 12 лет назад

thanks for watching!

@neffk 12 лет назад

Why bother with the carb? Couldn't you just change the fuel? Nice video, BTW

@donyboy73 11 лет назад

thanks

@chautran01 7 лет назад

My echo pb403T the air filter it damper by fuel. Please help

@cookytrix 3 года назад

should be dannyman73, cuz you are the MAN!

@cowboy0140 12 лет назад

hey donyboy 73 echo has a 5 year warranty ? return to store for a new one?

@renecevallos9005 5 месяцев назад

So whats the difference between a carburetor kit and a regular carb aint the same aint a new both?

@wcjcnc 10 лет назад

Oooops! You lost the tiny roller in that carburetor. At 4:48 you can see it's there. Right after you remove the black plastic part you can see the tiny roller in the carburetor body on the right side. It's a VERY tiny round metal piece that sits on a little pin. The rotating part of the throttle barrel rolls against it for smooth action. At 7:42 you can see it's missing right before you put the black plastic part back on.

@waynescott7087 9 лет назад

+wcjcnc I think something fell out of mine when I was taking it apart. I came here to see if there was a roller or something. I found the same spots you mention with and without the roller, then saw your comment. Yeah, I think something fell out. :(

@ZombieDaveAZ 6 лет назад

wcjcnc you are spot on! That little roller is VERY tiny. If you don't look for it, you would never notice that it is missing. Not only does it ease the operation of the rotary slide but it changes how high the slide will come up. Its not much but its something. Some guys reading this may not think that little wheel is a big deal.Imagine that little wheel inside your engine. It's bye bye time for the engine because you didn't know to look for it. Awesome video by dony ......again!

@donyboy73 11 лет назад

thanks man

@kellywarren1965 5 лет назад

what is the hose with the white plastic thing on top coming out of the tank for or go to ? and why is it there ?the fuel tank looks like three hoses are comig from inside the tank but one looks as its capped off

@donyboy73 12 лет назад

yes, lol

@temesgenwondimagegnehu105 5 лет назад

Very Nice video... I have pb-265L. I changed the fuel lines, the carburetor, and the spark plugs and still not starting up. Any suggestions that might be wrong with it. I need some help.....Thanks in advance

@55dpc 9 лет назад

Can I ask? Does every back pack blower engine need a carberator filter. Mine is a Home Depot Home Lite brand! It runs but not FULL THROTTLE! The air/fuel mix is not working without a filter. Can't remember if it had one or not! Thanks!

@Tristan102100 12 лет назад

i got a craftsman a year ago. it sat for a solid 10 years outside in the weather. when they put it away the valves were closed,so that helped alot. the carb had so much water in it for so long,there were calcium depisites everywhere! so much the choke was COMPLEATLEY frozen open! i compleatley soaked it in wd40 for 2 solid days,and it works great! i even had the same brand new carb laying around and it ran better with original! it vibrates out of adjustment sometimes, but no other problems!

@zodiaco702 12 лет назад

good

@jbuilds1 12 лет назад

great vid! I was wondering if you could answer a question for me. I'm rebuilding a Mikuni carb on my 2 stroke motorcycle and I seem to have stripped the pilot jet screw. I don't have good access to it as it is inside a long metal tube sort of thing. Anyway, is my only option drilling it out and using an easy out?

@Sean-Aviation 7 лет назад

I have the Husqvarna 125B blower which I hate. spent more time taking care of issues than run it. last time it run smooth after i cleaned carb and what not. tried to fire it up now after two weeks. nothing! not even coughing. Looks like it has a spark. I put fuel direct into the cylinder head and it doesn't even cough. I have no idea what could be the issue. any ideas? what sort of compression read should I expect from this blower?

@SuperFishbreeder 7 лет назад

shop that dont replace all parts screw you out of your money it a half assed job

@jameswright2090 10 лет назад

Can this carburetor substitute for the one on the Husqvarna 125BT backpack blower?

@backdraftdragon3150 8 лет назад

My echo pb260 L backpack blower Boggs down but when I lay the unit down it throttles up why?? P.s. I replaced the carb

@mrbluenun 12 лет назад

For me, this carb' looks like a very well made piece of kit. With obvious inlet, output sides and the whole thing is solid, not tiny as one often finds on the smaller engines. I guess this is what you get for the extra few pennies? Love you video showing all the details. Take care. mrbluenun

@SuperFishbreeder 7 лет назад

never reuse parts or your going to just keep taking carb apart multiple times, for parts failures, parts are cheap, time is important

@Vfh........y 7 лет назад

seadooman o .....for sure......

@redlense4 12 лет назад

Sure, but I'm wondering specifically what that damage was. He took the carb completely apart and it looked to be in great condition.

@STIHLFOREVER 12 лет назад

Part 2 The water is heated to 80 celsius, simultaneously the device emits ultrasound. After washing the carburetors are clean and shine like new and are super clean. You could save a lot of money and have a better results, trust me. Search on google SOLTEC, the site is in Italian, here you can see the devices. Your videos are great, thanks very much and keep up the good work it's amazing!!!

@174joedirt 12 лет назад

how often is it that the carb needs to be replaced

@210johndeere 12 лет назад

how much did that new carb run you $??

@TheKokojoe 11 лет назад

This is why they tell you to take care of your equipment, and never leave fuel in them for an extended period of time, especialy for the lower end models.The higher end models of Echo don't have this problem my experience, I know, because I've actually left fuel in them over winter and the dammed thing started rite up in the Spring.

@jzim77 11 лет назад

I have a Husqvarna 170BF backpack blower with same problem twice. First was a year ago then just last weekend. I purchased the unit new in 2009. Carb is a rotary walbro WYA64.The fuel filter is very similar to the one on the video and is a Walbro. Both times I fixed my blower simply by replacing the fuel filter. Even though it did not look dirty AT ALL it was restricting fuel. The unit would idle all day long but bog throttle applied. I am still suprised the fuel filter was they culprit.

@Pheena321 12 лет назад

Hey Dony, I just repaired an Echo srm-230 ( no Start) with the same carb. Upon initial reinstall of the carb I noticed the throttle cable was not moving as smoothly as before. When I re-evaluated the repair I noticed I was missing the minute roller inside rotary valve of the carb. I see in the video it appears yours may have slipped off too. Did you notice any difference in the function of the trottle or performance?

@outdoorsman310 12 лет назад

where is the spring broken?

@anthonygostling 5 лет назад

Am not sure about the water damage bit, but I have clean a carb 7 times and it still wouldn't run right, in the end I did tell the owner he had to buy a new one, keep the videos coming donyboy73