Card scraper VS. Standard scrapers__how and where to use it

Tomislav Tomasic Woodturning (Dodir Drva)

Подписаться 51 тыс.

Просмотров 2,9 тыс.

50% 1

Using card scraper can have its place,but I'll show why I don't use it all that much and what are alternativas...
Enjoy
______________________________________________
AFFILIATE LINKS
KS SCHULTE
MIDI 2 PLUS LATHE
ksdrechselbedarf.idevaffiliat...
KS BOWL GOUGE
ksdrechselbedarf.idevaffiliat...
CROWN BOWL GOUGE
ksdrechselbedarf.idevaffiliat...
KS SPINDLE GOUGE
ksdrechselbedarf.idevaffiliat...
REVOLUTION TOOL ksdrechselbedarf.idevaffiliat...
REVOLUTION MIDI
ksdrechselbedarf.idevaffiliat...
RAZOR EDGE BOWL GOUGE
ksdrechselbedarf.idevaffiliat...
RAZOR EDGE SPINDLE GOUGE
ksdrechselbedarf.idevaffiliat...
STANDARD SCRAPER
ksdrechselbedarf.idevaffiliat...
______________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz/gurtool-pm-dut...
Spindle gouge -www.gurtool.cz/vretenovy-stru...
Calipers - www.gurtool.cz/hmatadlo/
Sanding pads - www.gurtool.cz/unasec/
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr/CBN-brusna-plo...
BENCH GRINDER
www.tobi.si/hr/Stolna-dvostru...
DIAMOND FILE
www.tobi.si/hr/Arbortech-diam...
______________________________________________
TELACK
www.telack.hr/shop/index.php?...
SANDING DISCS 75mm INDASA
www.telack.hr/shop/index.php?...
SANDING ROLLS INDASA
www.telack.hr/shop/index.php?...
Thank you very much for watching 🤗

Наука

Опубликовано:

24 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@keithedwards1038 6 месяцев назад

You’re such a talented turner. Thank you again for sharing your expertise. I wish I had a hands on mentor to teach me. Everything I do, ive taught myself from watching videos like this. And I’ll be completely honest, I look up to you as a mentor. Sometimes I’ll watch your videos several times. To make sure that I have gained everything possible. Then I go to my shop and turn.

@tomislavtomasicwoodturning 6 месяцев назад

Thank you very much for your support, basicsly I did the same, I took every advice from Richard as we are on different part of the planet, I took his every mail and messege and help note and just practice, also with his books .... Thank you once again 🤗

@keithedwards1038 6 месяцев назад

@@tomislavtomasicwoodturning thank you. Also I added a profile picture here. I’m new to all of this stuff. Please take a moment and look at the picture. It’s all my work sitting on my dining room table. Let me know where I need improvement.

@tomislavtomasicwoodturning 6 месяцев назад

@@keithedwards1038 its hard to tell like from pictures as sometimes is more to the feel, however even if you are someone with more expirience you still want to improve or at least try something new on every bowl....

@tomislavtomasicwoodturning 6 месяцев назад

@@keithedwards1038 i would say that your work is really good, some pieces may look a bit heavy, maybe chunkier but again someone may like that..... Have you tried to sell some of it? People who buy often give good feedback as well

@tomislavtomasicwoodturning 6 месяцев назад

@@keithedwards1038 all in all for someone who just started out your work is really good

@clydeschuyler 10 месяцев назад

Great informaiton again Tomislav! Another tool for the toolbox.

@tomislavtomasicwoodturning 10 месяцев назад

Thank you🤗

@briandoyle4737 8 месяцев назад

Wonderful as always. A set of fiddle makers/luthiers scrapers could also prove useful for different curves.

@tomislavtomasicwoodturning 8 месяцев назад

Indeed they can be quite usefull ☺️. Thank you very much

@jasonkelly3159 10 месяцев назад

i have used card scrapers for 30 years and never thought of using them on the lathe, great idea! thank you

@tomislavtomasicwoodturning 10 месяцев назад

Thanks for watching

@johnnyb95678 10 месяцев назад

Thank you for yet another approach to solving grain tearing problems. I've been using card scrapers for years and like Jason, never thought of using them on the lathe. Thank you!

@tomislavtomasicwoodturning 10 месяцев назад

Thank You for watching 🤗

@MASI_forging 9 месяцев назад

Amazing craftmanship 👍👍

@tomislavtomasicwoodturning 9 месяцев назад

👍

@BasiliskFilm 10 месяцев назад

I'd heard about card scrapers on the lathe but apart from a brief clip of David Marks using one I haven't seen a useful discussion. This is a very useful demonstration, thank you. I might try grinding a concave scraper on my bench grinder for faring outside curves.

@tomislavtomasicwoodturning 10 месяцев назад

Thats great idea as curved scraper is much easier to use on outside....😀 thank you for watching

@BasiliskFilm 10 месяцев назад

it would be great to see your results if you try it.@@tomislavtomasicwoodturning

@tomislavtomasicwoodturning 10 месяцев назад

@@BasiliskFilm there is a video already out...

@stevenhansen8641 10 месяцев назад

🕶Thanks Tomislav

@tomislavtomasicwoodturning 10 месяцев назад

Thank you😀

@pjseiber2774 10 месяцев назад

As Always, very informative and helpful thank you so much for sharing your knowledge.

@tomislavtomasicwoodturning 10 месяцев назад

Thank You for watching

@walonguy111 10 месяцев назад

Nice video, very informative.

@tomislavtomasicwoodturning 10 месяцев назад

Glad to hear that

@boooshes 10 месяцев назад

Very nice. It's a good day when you start sanding with 240 or 320🙂

@tomislavtomasicwoodturning 10 месяцев назад

Always 🤗

@jamesstrathy2178 10 месяцев назад

Because of the ash boring beetle, ash is a firewood staple. I burn wood for heat so I pick through and use a lot of ash. Is this scraper card wood? It seems hard enough.

@tomislavtomasicwoodturning 10 месяцев назад

I've heard of ash sick , thankfully its not as a issue here in Croatia....