CARPRO Lift! Highly concentrated pre-wash foam!!

Подписаться 249 тыс.

Просмотров 24 тыс.

50% 1

Today, we put CARPRO Lift through the Apex Detail Review Process! CARPRO Lift is a highly concentrated pre-wash foam agent that dissolves and softens dirt and grime so it can be easily removed during the wash. Suitable for use with all foaming tools, canisters, guns, and pressure washers, CARPRO Lift produces a thick foam designed to prep the most embattled areas of the vehicle.
Use LIFT to soften bugs, baked on dirt, and more. Lift is formulated specifically to offer maximum wetting and rinses off easily as well. It is not a superficial high foaming product but has been designed as a true active surface agent. During the panel dwell period, Lift’s bubbles soak the hardened debris and allow it to release from the vehicle with ease during the wash.
Note that CARPRO Lift contains the punch of an all purpose cleaner unless you heavily dilute it. It will strip waxes and some sealants from vehicles if used at a 1:10 ratio.
CARPRO Lift....www.amazon.com/s?k=CarPro+lif...
Use CARPRO Lift to prep for my coatings and sealants! Apex Surface Protection Metal Oxide!!
apexsurfaceprotection.store/
Here is a great showcase! • Apex Surface Protectio...
Data sheet and resource page for products by Henry Freeman! docs.google.com/document/u/0/...
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 946245059134747
#CARPROLIFT #CARPRO #AUTODETAILING

Авто/Мото

Опубликовано:

16 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 173

@Tops1212 3 года назад

Its so refreshing that Brian and other detailers, don't sell out to the devil for money and we only get his honest view, whether its good or bad. Its now come out that Pan the organizer, charges anywhere from $13000 to $20000 Canadian dollars for him to review companies products and you guessed it, he never says a bad word on his reviews and now we know why. Thanks for being honest Brian.

@777AndrewR 3 года назад

Where did you hear that from?

@dontridedirtydrd2282 3 года назад

I seen the screenshots blew my mind

@MTUnleashedTV 3 года назад

@@777AndrewR Look at Scott HD's latest video

@mokokoco4720 3 года назад

I fell into Pans traps before and never again. That guy is a joke

@jackemerson1171 3 года назад

@@dontridedirtydrd2282 yep - saw it this am

@antoniodenino5100 3 года назад

Brian, I appreciate your hard work and effort. You go beyond what we ask for! The best detailing channel bar none!

@sylvainmarier4818 3 года назад

Wow what a good test with numbers, I really like your ethic, that’s why it is my favorite detailling channel. Thanks Brian for this one, Lift was already on my next shopping list and will still be there after this video.

@jackemerson1171 3 года назад

Love Brian - truly a man with ethics

@scottmattern482 3 года назад

Easily one of the best

@kimnewling5728 3 года назад

Agreed

@p5tom 3 года назад

But Brian really raises the bar and exceeds....unbias, honest, hard working, straight with us, unlike Man the.......( that guy does not even have a gloss meter)

@theflash4956 3 года назад

A nice, quick, easy to follow, unbiased, scientific analysis, and it's not a sponsored/a sales channel. A real pro detailer, not a chemical engineer unlike that guy in Canada, whose hobby is detailing and selling and going on RU-vid to act as an "Influencer", the Kim Kardashian of the detailing world. No "man that's nuts", "that's insane", "I use it all the time", "all these 12 products from the same company are fantastic", none of that bollocks, as we would say in the UK. Great work, keep it up, and hope your subscriber numbers go up.👏👏👏

@scottmattern482 3 года назад

@@theflash4956 well, you missed the part where he sells his own branded white-label products. People are on youtube to make money, in capitalism everything is about the almighty dollar. Dont be naive.

@vetteboy1024 3 года назад

Keep up the great content. For some reason your slow motion foam dripping made me thing of the stay puffed marshmallow man. Now I have the Ghostbusters song stuck in my head. Thanks Brian. Thanks 😉

@spencerb3429 3 года назад

Thanks for the honest non sponsored content! Always know I can trust your opinions arnt bought. Makes the channel great!

@khrystianaravena6069 3 года назад

Amazing again, love the full details on all the products you do.👌🙏

@chicagomike2111 3 года назад

Great video as always Brian. You are an honest man with honor.. Thx for what you do..

@jameshutchins3396 3 года назад

Outstanding! Not just a subjective video but true testing. Well done!

@millerdetailing4176 3 года назад

Another great review Brian, thanks for all the informative video content.

@muchachogrande2019 2 года назад

Brian I love your honesty and transparency. I've never seen someone go as far as to show an actual receipt for purchases. You're my go to when it comes to researching compound and polishes and pretty much anything to do with paint correction, and I've learned so much from your videos that's made me a better detailer. If I'm ever in your neck of the woods I'd love to swing through and shake your hand as a small token of gratitude at the least.

@andrewvickers4487 Год назад

An invaluable and unique asset to the detailing community, so many nuggets of useful info on products and methods by going the extra mile in his vids!

@ptheledge5390 3 года назад

For me, Bilt Hamber auto foam is the best out there! I use nothing else. Always love your videos and one of the few channels I actually trust. Deserve so many more subscribers 💯

@qmoonwalker3847 3 года назад

Hey Brian! Love the test you ran.....you get the honorary title of scientist from this retired rocket scientist!

@javapaceable 3 года назад

Love watching the way you approach your testing

@bstewartexecutivecarcare3797 3 года назад

Thanks Brian. Much appreciated 👍✌️☮️

@fzbwarlust 3 года назад

Glad to see this. I bought a 1L of CP Lift from Clean Garage and received it this past week based off Pan's review with Ethos. CG were the cheapest at the time. I'm glad to see it compares well with BH and has better lubricity, which I also find to be essential. Can't wait to use it this week.

@jefflowe605 3 года назад

Hey Brian, I found your channel recently and I’m really enjoying it. I watch the new videos when they come out and am going back to watch older videos too.

@sylvainmarier4818 3 года назад

You won’t be disapointed, lots of great informations and not just on products but also on how to’s.

@torkgarage5893 3 года назад

U inspired me man to become a detailer my self thanks for the amazing content

@apexdetail85 3 года назад

Great to hear. Have a successful, prosperous summer!👍🏻

@iMiik 3 года назад

perfect instruction, great advice, a voice i can handle. keep it rollin' 👍🏼

@nightdaychannel828 Год назад

Great video! Love the cannon ph analysis as it always significantly dilutes any product!

@majesticdetail3422 3 года назад

Great test brian! An awesome way to show how strong the soaps are.

@lifeofbrian9511 3 года назад

Enjoyable, informative video!👍🏼

@J1Z06 3 года назад

Brian, I want to let You know that I tried the multi mitt/single bucket method today and truly enjoyed it! it makes a lot of sense! thanks so much!

@sometimes5207 3 года назад

I legitimately have no clue why one would use a single mitt on a car, especially microfiber. There’s ample evidence they don’t completely release the dirt and that most grit guards are doing pretty close to dick in terms of keeping contaminants out of the ‘clean’ water.

@user-kp6ld8qg6w 3 года назад

Got to admit. The slow motion on the dripping suds,was getting me excited😂

@fpswick8458 3 года назад

Fantastic Video. I love all the details.

@ddautodetailing 3 года назад

Very creative idea with the test strips!

@404notfound..... 3 года назад

Excellent video Brian! I have this product, and it works great for its intended purposes.

@masterstacker2833 3 года назад

Terrific video. I have plenty of it but I haven't had a chance to use it yet. Looks like just what I need for my next wash.

@Ricky_R 3 года назад

Excellent excellent video. Thanks for showing how it does on the contact wash 🍻

@gnawty4662 11 дней назад

I love these types of videos!

@BelLavoroAutoSpa 3 года назад

Lift is an amazing product. My dedicated product for pre washing coated cars.

@bigd9848 3 года назад

Excellent video as always Brian ✊Just took off well one wheel and brought it inside and did the whole job from wash clay polish and ceramic coat with IGL eco-wheel coating. I bought it a little while ago so figured I would use it. I gave it two coats.Then I will do the car and use your coating.Looking forward to using it ✊

@Tomaskii 3 года назад

I use that since february and works really well 👍

@jimmyqballs 3 года назад

Pretty incredible! I've been using the Bilt Hamber Auto Foam and find it did a spectacular job with a few weeks of that PA pollen / water spot hell you get after a week of April rain. Car Pro looks even better, but as always more expensive lol

@neilwalker5041 3 года назад

What a great video as I have been studying both of those products a lot lately. I am really surprised by how much the ph drops when using a foam cannon. Thank you for this awesome video.

@williamgiglio3476 3 года назад

Thanks Brian! Very informative!

@danmorrissette4814 3 года назад

Great Lube~!! did a pretty good job after the wash~! :-)

@Ichabod_Jericho 3 года назад

I adore that you tested this against BH auto-foam cause these are the exact two snow foams I came to after horrible residue results with Chmeical guys watermelon + purple power degreaser. These are total game changers! Well worth their price!!

@toddn.3123 3 года назад

I had the same issue with Chemical Guys soap. Took me years to figure out it was the soap that was the problem.

@pj9241 3 года назад

There citrus wash and gloss is good and I like the Mr pink I think it’s called. But I have had issues with some of their other soaps. Griots 3 and 1 ceramic wash also left a weird residue. Sometime I just like a normal wash no need for all the new crap

@dave2166 3 года назад

CG products are overrated in the main... just too many with similar abilities in a bid to strip you of your money...

@Youknowitbby 3 года назад

@@pj9241 weird it directs foam half car rinse and foam the rest that follows and rinse once again in foam cannon feels a bit to much tbh but it does leave a solid finish

@mokokoco4720 3 года назад

I also had problems with Watermelon as well because it leaves a white film on it even though I used not that much product. That is the only soap I have came across that does that

@autoinfinitydetailing8382 3 года назад

Great video as always.... !!

@Jackman66666666 3 года назад

C- mon 100,000 subscribers!

@the_Real_R3x 3 года назад

Look forward to getting this.

@eamonkelly2792 3 года назад

Thanks again for your time, effort and support brian, I know a lot of people keep saying this but it's true it's so nice to hear and see what you think and how to apply products properly, thanks again 👍👍👍👍

@Chris-wb7ni 3 года назад

Great review

@dave2166 3 года назад

Another good product to add to the arsenal. For that twice a year good stripping back

@PapaSmurf918Detail 3 года назад

Awesome video Brian... great information. Really takes it down in ph by using in foam cannon. Wonder if you add an extra ounce if the will bring the pH back. 🤔. Either way 2 great products I wish to try! Take care my friend!

@jamess1534 3 года назад

great stuff Brian...you have been my mentor for years! thank you for a continuous education. Were those Adam's bottles you were doing the foam spray testing with? or just the regular MTM stuff?

@SDC- 3 года назад

Very informative thanks 👍

@alanwallace3253 3 года назад

I watched another video where test let the water being introduced with the foam cannon to be the “ diluter” so to speak. Seemed expensive per use but effective obviously. I’m going to try it when I resume operations and use up the current foams I’ve been using if I can get it shipped to Maui. That’s always an issue. I use Reset a lot and thought this would be the ideal companion.

@richardseem7948 3 года назад

As always great video and product review good friend. Only thing hurting this product is it's price point. Just my opinion. Works awesome good friend

@kimnewling5728 3 года назад

Cool information. Thanks.

@charlieporch3181 3 года назад

Interesting. For extremely dirty rides ,I use Purple Power Boat and Vehicle wash mixed with one ounce of DPC Revive in a Griots cannon . Most cars we see are dirty. Depending on the budget,we use a protectant in line with the cost. Currently looking at Apex Rehydrate Sheet. We also use Griots spray on Wax. Cost per vehicle is important in the Latino market here. Budgets are low,expectations are high.Interiors are higher on the list. Cheers Brian.

@apexdetail85 3 года назад

Absolutely... you learn to get creative when budgets are low.

@fredericst-pierre8933 3 года назад

Merci beaucoup Briand

@SuperchargedLlama 3 года назад

Fantastic video as always. As a long time Autofoam user is was nice to see that get a comparison in a state-side video. Regarding waterspots, you could try Koch Chemie FSE, it's designed for that job and pretty effective. You mention your hard water where you're located, do you have a reading from a TPS meter? My area in the UK is about 350ppm for comparison.

@jseichhorn 3 года назад

Glad to see Lift tested on the channel and CarPro products in general. What rating would you give it and do you prefer it to Bilt Hamber?

@mikeyp2447 3 года назад

I had to slow the vid... but the Clean Garage should be happy you dropped over twelve hundred on them. Lay off the product B! 😂👍🏻👍🏻

@apexdetail85 3 года назад

I can’t resist!😂

@no_lft_shft 2 года назад

It is now to the point that if I am considering a new product I first search to see if Brian has reviewed or tested it.

@MrCamzdad 3 года назад

I bought this a few weeks ago. I haven’t used it yet but I’m certain it will pair well with Reset. Looking forward to using it tomorrow on our 3 cars 🚗

@themachine8009 3 года назад

Great vid Brian. I enjoyed the technicalities of your vids. I’m wondering if u have used the Griots brilliant finish foam canon. Someone made a vid about it and said that it’s better than the mtm pf22. I’d like to get ur opinion. Thanks in advance

@apexdetail85 3 года назад

I can’t say I have... will look into it.

@Deviantsoundz 3 года назад

I always recommend the clean garage.

@apexdetail85 3 года назад

clean-garage.com/carpro-reset-intensive-car-shampoo-1-liter-formulated-for-coatings/

@urbanedgeautodetailing 3 года назад

Will you be doing a review on Glassparency graphene spray coating? The water behavior with this stuff is insane, it will be my new go-to for everything not getting Kenzo.

@MNpicker 3 года назад

Nice!!

@dailyDIYdude Год назад

Can I use the lift for weekly washes as a pre foam if my truck isn’t coated? I just use Juscar and waxes. Thanks Brian

@supercharged00gtp 3 года назад

Would this be a good candidate for the deep clean on coated cars to restore the hydrophobic properties?

@SuperchargedLlama 3 года назад

Something to add, you foam Lance mix for the auto foam doesn't look like the strength needed for Bilt Hamber's maximum strength of 4% PIR?

@jt4199 3 года назад

Do you have any headlight restoration/cleaning tips or tricks???

@HoosierDaddyDetailing 3 года назад

Been looking for a decent prewash solution. Been using Griots surface prep in a foam cannon but this might be a better option? Thanks for your "honest" review as always 😉

@jackemerson1171 3 года назад

I think the Griots is stronger

@AM4N18 3 года назад

Do you think we will be seeing a 'products that I use' video for a maintenance wash? I think its the missing video from your previous two.

@SensibleBHPian 3 года назад

Need some suggestion. I am confused about which approach to follow. 1. Using Carpro Iron X followed by Carpro Spotless followed by a thorough wash with Gyeon Bathe OR 2. Just use Carpro Lift followed by a wash with Gyeon Bathe. I want to apply a wax/ sealant after this and want to ensure that the surface is clean and decontaminated before the application. Appreciate your response.

@rockingarchangel 3 года назад

In your opinion. Is this product more effective than bilt hamber auto foam?

@MJJCvideo 3 года назад

Hi@ Apex Detail, would you like to review the new MJJC foam cannon pro? Thanks.

@darkwhorse 3 года назад

99k baby!!!!

@no_lft_shft 2 года назад

I would love to get your opinion on carpro trix. It seems they combined the iron and tar remover into one product.

@Bull1the1Great 3 года назад

I see the video about Man the Advertiser has rippled quite some much. Anyways, love the Lift , my go to shampoo now for my foam cannon

@mikesloper7112 3 года назад

Hi Brian, very interesting, I'm probably not the first guy to accept manufacturers dilution ratio's as gospel but its nice to see what one has trusted really does do what it says on the tin. p.s. thank you for the confirmaton issues at the start, I genuinely believe anyone of your 'regulars' would not have thought otherwise. Honour & Respect is hard earnt but easily broken when the reality isnt as has been percieved. You are the Honourable Gentleman & any regular will put an individual questioning that back in their box pdq!! p.s. can you tell me where you got the Bilthamber from please, I was beginning to think it wasnt available State Side

@apexdetail85 3 года назад

clean-garage.com/bilt-hamber-auto-foam-5-liter-169oz-pre-wash-snow-foam/

@mikesloper7112 3 года назад

@@apexdetail85 Thanks Brian .

@Darkcruzer23 3 года назад

Did you use 3oz in the foam Cannon when you tested the pH? And how much water? I want it to be safe on my protection Which cleans better between the two?

@aarongonzalez2156 3 года назад

how good is this one compared to angelwax fast foam on removing traffic film?

@ryanmuliloda4405 2 года назад

Hi Brian! Can I ask how many ounces Carpro Lift and BH AutoFoam you've placed on the foam cannons for the strip tests at 9:30 ? Most foam cannons filled with 1000ml paired with different pressure washers give an output of roughly 10liters on average. If you've also placed 90ml (3 ounces) of Carpro LIft and BH AutoFoam on the foam cannon tests mixed with 900ml of water (starting at 9:30), that would be roughly 9000ml of output with 90ml (3 ounces) of product mixed in. That would be on the 1%PIR range. The normal bucket strip test (starting at 7:00) was also 9000ml of water mixed with 90ml of product. That would also be in the 1%PIR range. But I'm curious as to why the foam cannon tests had a much lower pH compared to the normal bucket strip tests when they both are roughly in the 1%PIR dilution. Thanks so much Brian!

@klasseact6663 3 года назад

This is a great candidate for the Griot's Garage headlight restoration kit (hint hint💡)

@derek723 3 года назад

MY MAN BROKE OUT THE TEST STRIPS!!!! At a baby Brian!!! What's more economical between Auto-Foam and Lift? I've seen some people putting as much as 13oz of Auto-Foam in their foam cannon???

@apexdetail85 3 года назад

Yeah.. 1:1 (Bilt Hamber) versus 10:1 (CarPro)

@datsuntoyy 3 года назад

7:00 it looks like you put 3 times as much blue in the bucket as you did lift. Do you use Blue as a heavy duty wash or as a regular wash? Seems to me either will work both ways depending on concentration.

@hermittanimoto9325 3 года назад

Brian, you had a chart with pre-wash foams...does it do better than Angelwax Fastfoam? Tks

@dthomson409 4 месяца назад

Hey Brian, if I foam, dwell and rinse down, and then foam the car again to contact wash, does that provide enough lubrication?

@ItsRyan. Год назад

Would Lift be ok to use for weekly washes on a coated car with CSL + EXO? Or would that start to degrade it over a few months? Thanks

@norcalspitshine9067 3 года назад

Nice

@skyb0yTube 2 года назад

Any ideea if Lift is safe to use on cars with CarPro CQuartz coatings?

@BigBear-- 7 месяцев назад

What PIR were you using for the Auto-Foam in the foam cannon?

@michelaudet7799 3 года назад

Great review as usual. No more carzilla?

@apexdetail85 3 года назад

Carzilla rocks!🤟🏻

@jayzhang14 11 месяцев назад

Can you use lift on ppf?

@BigBear-- 7 месяцев назад

I just learned that The Clean Garage, which was the only US based importer of Bilt Hamber, will no longer be carrying it. It was like an arrow through my heart, especially because I could go and pick it up locally. I have no idea why. They mentioned something about how it's annoying to deal with the import process. Though I don't see how it's any different with any of the other overseas products they carry. Thank god I'm loaded up on Bilt Hamber products to at least last me a year or more...though what I'm going to do after that I don't know. I guess I'll have to pay the high shipping charges to get it directly from the UK...there's no way I'm not going to have access to my favorites: Auto-Foam, Touch-Less, Auto Wash Shampoo, Surfex HD, Atom Mac, Cleanser Fluid, and Korrosol.

@151motorsport 3 года назад

Brian, isn’t BH’s dilution closer to 1:1 since they recommend a PIR percentage? Would that change the strip test since it would be a higher concentration of chemical?

@apexdetail85 3 года назад

It would. Way to harsh to my liking. But yes it would greatly change results. Closer to tunnel wash levels.

@151motorsport 3 года назад

Apex Detail what is your dilution ratio in a foam cannon for BH?

@apexdetail85 3 года назад

@@151motorsport 3 ounces at most.

@Anlturner 3 года назад

Where can I get a bucket like that?

@J1Z06 3 года назад

How does it compare to Adam’s Ultra Foam? The Clean Garage is awesome. I’ve ordered several items from them. Could that foam be ANY thicker? W O W !!!! 5 mitts... THAT is an idea. A great one. 😎

@apexdetail85 3 года назад

Not sure about Adams but Griots garage surface prep wash is similar.

@J1Z06 3 года назад

@@apexdetail85 thanks for your reply. Give Adam’s Mega Foam a try. I think You’ll like it.

@qwikss4469 3 года назад

Thanks Brian. This is the second video I’ve seen where the pH of lift is basically neutral out of the cannon. Not much different than any regular shampoo. 🤷🏻‍♂️

@apexdetail85 3 года назад

Out of the foam cannon... they all are quite similar unless used straight up.

@Danny-xj5ts 3 года назад

Isn’t runny foam better? I think you said in a video it below with displacing and removing surface contaminants better?

@apexdetail85 3 года назад

It’s subjective but I like a wetter foam versus light and fluffy.

@joshharding9944 3 года назад

Brian, any thought on BH touch-less? I’m using the auto foam now and thought about trying touch-less once I run out. I think it is under $10 more, just wasn’t sure if it was that different (worth it). Thanks in advance

@apexdetail85 3 года назад

I will look into it.

@kwl189 2 года назад

Apparently touch less is better than auto foam. Especially on certain types of traffic film, it’ll do a very very good job of breaking it down. Looking to try some myself when my auto foam runs out.

@TheMstwntdLMSV123 3 года назад

I can't seem to find TAC Systems Paintwork Cleanser anywhere. What else would you recommend for removing very stubborn road film to prep for a new sealant?

@apexdetail85 3 года назад

Sinus has one as well as PS21.

@Flightsimmovies 2 года назад

Lift vs Adam mega foam ?

@rozaroza5294 2 года назад

I could be wrong, but it seems like you’re using the Bilt Hamber Auto Foam at a much lower PIR than what Bilt Hamber recommends (4-5% PIR), if you really want it to clean well. For a 2.0 GPM pressure washer you should be adding around 300 ml of Auto Foam to your foam cannon, which is about 10 oz. That’s to achieve a PIR of 4%, if you wanted 5%, it’d require even more product. (This is assuming you’re actually achieving 2 GPM out of the pressure washer with the foam cannon attached. Their instructions for actually testing your output are very useful, and will give you exact, tailored to you, dilution ratios). Yes you could use less, for less dirty vehicles. But especially in the case of comparison to another product, where you do use their proper dilution ratios, I think it’s unfair to handicap the Auto Foam by adding less than what’s recommended.

@23dothedew 3 года назад

Brian is it possible to get the thick foam like you got in this video with a foam gun and a regular water hose? Or do you need the pressure washer to generate that thick foam?

@apexdetail85 3 года назад

You would need something with higher pressure. 1800 or higher is best.

@23dothedew 3 года назад

@@apexdetail85 thanks Brian!