CARPRO Ultracut Extreme Cut Compound!!! Compared To Sonax Ultimate Cut!! How Does It Rate?

Подписаться 249 тыс.

Просмотров 16 тыс.

50% 1

In todays video, we take a close look at CarPro Ultracut. CARPRO Ultracut is the heaviest cut compound CARPRO has created yet
Ultracut contains a cocktail of fully diminishing abrasives, which correct heavy defects, while producing minimal haze. Combine it with the CARPRO cutting pads (Wool, Flash, Cool) or Microfiber for extremely effective and efficient defect removal. Drop down to CARPRO Orange Polishing Pad and you can finish down hologram-free.
While Ultracut was designed for rotary use it can be used to amazing effect with Dual Action machines as well! Extremely low dusting and a lubricant that allows the abrasives to be worked for an extended period allows total breakdown of abrasives with less marring and holograms.
CARPRO Ultra Cut....www.amazon.com...
Features:
Extreme cutting action.
Extremely low dust.
Suitable on all paint finishes.
Suitable for rotary and dual action users.
Removes p1200 grit and up.
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodet. .
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 94624. .
#CARPROULTRACUT #PAINTCORRECTION #AUTODETAILING

Авто/Мото

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@apexdetail85 2 года назад

What is your go to cut compound?

@enriquevaladez1818 2 года назад

My go tos ( which you should try out ): Shine Supply Chop Top for a fast cut, Classic Cut & Flat Top all are great

@craigtershel4134 2 года назад

So far JESCAR CORRECTION COMPOUND has been my go to and in some cases I can get away with using it as a one step.

@gordon238 2 года назад

3D ACA 510

@domtrabucco7612 2 года назад

3D ACA 510 is my go to for cutting Carpro Essence is my favorite finish polish

@moisesperez3693 2 года назад

3D 501

@ALIxGaMeR1 2 года назад

Nice video, I hope you Do a review about 3D ACA 510

@PeteyMcSavage 2 года назад

Maybe start polishing in the 800 section and work to 3000

@dvlop0018 2 года назад

On camera car pro did seem to cut better, and at least to me seems to finish a bit better. Thanks Brian for making these videos

@no_lft_shft 2 года назад

Honestly if I had to pick one brand for all my detailing needs I think carpro is the route I would go. They just seem to have a very good all around product. Another great video!

@Ichabod_Jericho 2 года назад

They do have a great line up, but it’s marketed heavily and mostly for weekend warriors with nice cars that they care about the results on. They do use pharmaceutical grade active ingredients, like ultra clean but CarPro is notoriously a little stingy with active ingredient and they tend to be a little “weak”. Not saying they don’t do the job fantastically, just that they’re overpriced for what they accomplish.

@no_lft_shft 2 года назад

@@Ichabod_Jericho awesome insight. Thank you.

@cjarchie9745 2 года назад

@@Ichabod_Jericho and which brand do you prefer?

@user-un5my5bw4j 9 месяцев назад

I detail a lot of vehicles. I was using 3D #500 and #520 for two steps but recently switched to the Carpro Essence for the second step as I feel it finishes down to an outstanding finish. I may just start using Clearcut as the step one. I still use 3D One as a one step though with buff & shine euro fiber pads. I also use Sonax Ultimate Cut for heavy defects. Carpro makes great stuff and there are no fillers or silica in their compounds just like other top Professional compounds like 3D and Sonax don't. No one can say they are aimed at weekend warriors, over priced, or have weak ingredients because that is simply not true. Th they are making great compounds and ceramic coatings. Their ceramic coatings are some of the best I have used

@neilwalker5041 2 года назад

Koch Chemie and now Papacut. I am looking to get into 3D next. I never think about CarPro but now I should be.

@craigandrus327 2 года назад

I know everyone has their preferences, but, in our hot and humid climate I find Sonax creates dusts. Granted I work outside and not in a shop. My go to is 3D Extra Cut.

@apexdetail85 2 года назад

I agree.

@matiusteddyc.856 8 месяцев назад

Not sure why skip 1200 and 1000 grit. 1500 to 800 is HUGE leap. Instead of testing 1200 as the claim.

@mann8254 2 года назад

Great video Brian, Carpro surely came up on top for me, Sonax is good but carpro did a much better job at the 800grit sand marks...Thanks Brian👍💫

@ShineYourLightDetailing 2 года назад

Brian, excellent comparison. This is very important to me as I do a lot of Paint Corrections. Thank you very much! 👍🏼👍🏼

@scottsigmon926 2 года назад

I love this series Brian. I’m always looking for something better to use than my 3D products and CarPro is one of my favorites!!!

@dannydaugherty5702 11 месяцев назад

I just purchased some ultra cut and I am very impressed with my choice! I think it did a better job too! Great video my friend ☝️👏✨

@dtna 2 года назад

Funny how sophisticated compounds and polishes have become. I used to swear by 3M & Meguiar's. Lol.

@snail415 2 года назад

Megs M110/210 are solid products. Give them a chance if you track product cost per-ounce in your work.

@craiglyles4755 2 года назад

3M is still one the best systems on the market. They spent money on R&D and developed the base formulas most of these other competitors have copied.

@davescott9062 2 года назад

I still like meguires ultimate, I'm old school trying to learn new tricks

@snail415 2 года назад

@@davescott9062 That’s a great ‘learning bottle’, and I mean it. It has a lot going for it, but once you find its limit with both cutting and open time, THEN try these products. A lot of it is all about your priorities with a given amount of time. For leisure, Megs consumer products are great. For those who have a high standard and low time, the above products show their value.

@davescott9062 2 года назад

@@snail415 agreed on all points

@snail415 2 года назад

Serious question- If CarPro is a diminishing abrasive compound, does making a straight pass skew the results in any way? I’ve never used a diminishing compound, so in my mind I imagine that you’d want to do multiple passes (without adding product) to assess how well it can finish-out. From a cutting standpoint, one pass makes sense to me. Help me out here, as I’m genuinely curious. Appreciate the test.

@Reaper-Jim 2 года назад

Diminishing abrasive results are generally the same no matter what company uses them in their products. They start off aggressive and become less as you work the polish. I don’t, personally, like diminishing abrasives for cutting because it kind of defeats the purpose of quickly removing scratches. A straight pass, small panels, a 2’ section won’t matter. The polish works the same way. For me, cutting is cutting. There is no need for starting off strong and finishing soft because you’ll never get the finish of a finishing polish … so … for cutting, I’d use cutting polish with no diminishing abrasives. For finishing (or even just paint enhancement) diminishing abrasives makes total sense.

@LucaBonato 2 года назад

@@Reaper-Jim I had the same opinion before using ultracut. Before I used 105 or 101. Ultracut will never dust, with the right pad you can use it as a onestep with a DA, with rotary and wool its lubrification is far superior than megs and lest you cut for longer. When cutting, especially on rotary with wool, if you can get a great finish you can skip the medium polish and pass to the finisher. Diminishing abrasives are the way to go... Give it a try

@Reaper-Jim 2 года назад

@@LucaBonato I wouldn’t have offered my opinion if I had not tried several diminishing abrasive compounds. It’s nothing personal, I just don’t like them for cutting. They’re wonderful for finishing, though. I use Jescar Correcting for 99% of my cutting because I don’t generally see vehicles with more than (equivalent) 1500 grit scratches. Note here that I am NOT saying they don’t work, clearly they do. I’m saying they don’t work for MY process. 😊😊😊

@snail415 2 года назад

@@Reaper-Jim Great response, and exactly what I was looking for. I’ve always been a 2-step detailer for the most part, but for those doing simpler jobs for simple clients, I totally get it. Thanks.

@MarstaJNZ 2 года назад

@@Reaper-Jim whats your go to products?

@paulreichelt1259 2 года назад

Brian, could you please do this test again with a 5 or 6 inch polisher and that same Urofibre pad ..thanks

@norcalspitshine6406 2 года назад

Nice aca 500 menzerna 1000 cut I have recently have been using it’s a little dusty though not to bad.

@mutatedgenome 2 года назад

Thanks for the demo Brian. Which model Shine Mate polisher is that?

@tobiasdanielsen6110 2 года назад

shinemate eb351

@apexdetail85 2 года назад

This one...ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0FPEesFFVVc.html

@Chris-wb7ni 2 года назад

Love the video. I am a car pro and 3D guy so car pro all day

@iMiik 2 года назад

guess the shop manager is tanning by the pool on company hours since she didn't make the video. 😂 i go Sonax, Carpro just doesn't edge it out enough to make the change.

@apexdetail85 2 года назад

She deserved the day off. She loves the pool...great swimmer for her size.

@davida7713 8 месяцев назад

This compound isn’t heavy cut 🥱🥱🥱

@johnboy2436 4 месяца назад

nerd.

@patrickpeterman8736 2 года назад

I know your are a busy man so I will be quick- any suggestions on cutting and buffing "single stage paint??- also have you seen the AMD detailer using "EWOCAR HEAVY AND LIGHT CUTTING COMPOUNDS- GERMAN MADE ITHINK: " if so let me know what you think supposed to be a "fantastic cutting compound"!!?? thank you for your videos I never miss one PJP

@Ichabod_Jericho 2 года назад

The lack of dusting is incredible!! Anybody that’s buffed a whole car with a dusty compound on a warm day knows how irritating it becomes. It will end up in the seams of EVERYTHING and there have been times I’ve simply washed the car again after paint correction. Waste of time and effort when you COULD BE coating the car. Anyhow, I’m sold and will probably keep a bottle of Ultracut right next to my Sonax Cutmax in the work van. Thanks for showing us the product and what it’s truly capable of Brian! Love you feel free to adopt me as your child anytime I’m only 29.

@mikeyp2447 2 года назад

This looks rather effective.👍🏻

@apexdetail85 2 года назад

It is!

@dantom5634 Год назад

Hi Brian great review, one question the Ultracut you gave overall a 8 out of 10. What compound would you give 10/10? Thanks

@peterrichmond9762 2 года назад

Brian, Love your videos! I just coated my SUV with Apex Surface Metal Oxide. What is your recommendation for maintenance? Does the ONR polymers play nice with your coatings?

@zero1000 2 года назад

Can you review Waxedshine CUT and Hybrid ONE? Thank you.

@lrlforfun 2 года назад

Brian: How about a review of Sud Factory's water spot remover? Their claims seem like a dream come true. You are always referring to the hard water spotting in your area so I thought it might be a good one to find out how true their claims are. Thanks, Mitch

@albertvelez6386 2 года назад

I notice that most of tge heavy cutting compounds can remove up 1200 grit. Is this an industry standard?

@superiorautodetailing Год назад

I have a bottle of this too, but it seems like maybe it doesn't have enough lubricant or something. I find it makes the pad/machine jump around a lot

@betametabravo3547 2 года назад

Impressive indeed!!

@MNpicker 2 года назад

Good... fast cut👍

@richardseem7948 2 года назад

another awesome video/comparison good friend. agreed carpro in 800 grit section looked more reflective and cut a tad more.2 great products

@bigd9848 2 года назад

Always a great video👍🏻Another one for the library

@dacdri 2 года назад

Great comparison, great job, great video !

@choosechancemobiledetailin9587 2 года назад

Hey brotha I know you are a lot more knowledgeable me on every aspect of the game but a word of advice I don't think steam is good for the adhesive on the pads I wonder if you have ever had that problem. Also great content I am trying to get into paint correction and will be needing to get a compound that I'm able to use in the shade outside being mobile with no shop. Thanks man

@williambell7712 2 года назад

Steam? Most detailers use compressed air to blow out the pads. Usually in a pail with a few inches of water to capture most of the debris. 3D one with euro fibre 50/50 would be a great combo for you to start with.

@paulreichelt1259 2 года назад

Where'd you get the idea he's using steam..?

@williambell7712 2 года назад

I was responding to the post above my reply. I know Brian would never ruin his pads with steam, and never saw any pad cleaning in the video at all. It was a strange post by Choose Chance Mobile Detailing. I was only trying to point him in the right direction.@@paulreichelt1259

@apexdetail85 2 года назад

This pad washer would be a better option.....ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-p7ZlAay_ONs.html

@choosechancemobiledetailin9587 2 года назад

While everyone has there panties in a wad maybe watch some previous videos. Wasn't referencing this one imparticular. Was just saying...

@speedtiktokclips 2 года назад

Compare ultra cut to aca 500

@23dothedew 2 года назад

Thanks for the video Brian. If you have some dried polish or compound on the car is that hard to remove or does it generally come off when you wash the car again?

@apexdetail85 2 года назад

With a damp microfiber....comes off easily.

@antoniodenino5100 2 года назад

As usual, Great video

@alexgalan3261 Год назад

Which better ?

@georgekirby3361 2 года назад

Thanks Brian.

@ThePerfectionistJo 2 года назад

Try Koch Chemie H9.02 with them

@AmirAbdullah 2 года назад

It’s not available in the US yet unless you know where to get it.

@LucaBonato 2 года назад

Dusts like crazy as soon as the temperatures go above 30°

@AmirAbdullah 2 года назад

@@LucaBonato the new H9.02 ? I just seen someone using it. Ran it like crazy like 7 or 8 passes. You’ve used it I take it then.

@LucaBonato 2 года назад

@@AmirAbdullah sorry, misread 9.01. Still is the best compound in the market today for its versatility, great cut, awesome finish and 0 dusting... Used a lot of compounds, even the old h9.01, megs, rupes, labocosmetica, menzerna, 3d etc...